The first alpha of
syslog-ng 3.4 was released more than a
year ago, and the first stable release
earlier this year, development on
syslog-ng 3.5 has been going on steadlily since then, with a lot of interesting features and changes pouring in. While the 3.5 release will not bring as many overwhelming changes as the previous two releases did, the sheer number of improvements is still substantial. Our focus was on smaller developments all over the place this time, instead of big sweeping changes. In this post, we will go over most of these features, with use-cases, examples and a few words about why they are so useful and awesome.
Multi-line support,
new destinations,
new template functions,
type hinting,
unit suffixes, and
other things. Read on, and be amazed!These are only bigger features, there has been a lot of small tweaking going on, and of course, all of the fixes that went into prior versions will also be in 3.5 too, and there's still a chance that something else may find its way in before the feature freeze.
Multi-line supportOne of the major new features in the 3.5 release will be support for multi-line messages, a feature that has been available in
syslog-ng PE for a good while, and which has been ported to and improved upon to the open source edition. Two variants of multi-line are supported, which will be detailed below. Both of them are available for the
file() and
pipe() sources only.Indented multi-lineThe easiest variant is indented multi-line, where each line can be followed by others, indented by whitespace, and the message continues until the first non-indented line. This is the format used by the Linux kernel too, from version 3.5, for
/dev/log. This type of multi-line can be used as follows:
source s_multiline file("/path/to/file" multi-line-mode(indented)); ;Consider that
/path/to/file has the following content:
First line
Continuation 1;
Continuation 2;
Second line
With the
indented multi-line-mode() setting, this would turn into two log messages:
First line\n Continuation 1;\n Continuation 2;
Second line
Regexp-based multilineIf multi-line input is not based on indentation, one can use the
regexp multi-line-mode() instead, which makes two new settings available:
multi-line-prefix() and
multi-line-garbage(). These can be used to define the start and the end of a log message: any string between a the beginning matching prefix and a matching garbage will be considered a single message. That is, the prefix will be included, the garbage will not be: it will be discarded.To illustrate:
source s_multiline
file("/path/to/file" multi-line-mode(regexp)
multi-line-prefix("^prefix")
multi-line-garbage(" garbage$"));
;If the source contains these lines:
prefix message
continuing garbage
This will turn into the following log message:
prefix message\ncontinuing
New destinationsIt would be pretty hard to do a syslog-ng release without new destinations, and with 3.5, we will have three of them!STOMPWhile we had AMQP before, we now have a
STOMP destination too, so we can stream logs to any STOMP server, with a few simple lines:
stomp(
host("localhost")
port(61613)
destination("/topic/syslog")
routing_key("")
persistent(yes)
ack(no)
username("someone")
password("something")
body("This is the body! YAY! Here's a message: $MESSAGE!\n")
value-pairs(scope(nv-pairs, syslog-proto, selected-macros))
)Of course, none of these settings need to be set, you can just use the defaults, and it will just work!RiemannDid you know that syslog-ng is far more than a log collector and processor? No? You do now. When you have access to a lot of logs, and a tremendous amount of power in parsing them, you can use these tools for monitoring easily! And when we're talking monitoring,
riemann is a great asset in our toolbox, and with the new destination, we can easily forward metrics to it:
riemann(
server("localhost")
port(5555)
host("$HOST")
service("$PROGRAM")
description("$PROGRAM pids")
metric(int("$PID"))
ttl(300)
);Of course, the above is a very silly example, it would make much more sense to extract data from a log message instead, but this will serve as an example.
New template functions
$(upper-case TEXT...), $(lower-case TEXT...)-
To turn some text into *upper-* or *lower-case*, these two template
functions come in handy. They simply turn all their arguments into
the respecitve case.
$(delimit DELIMITERS NEW-DELIMITER TEXT)-
Sometimes one has a delimited string, where one wishes to replace
the delimiters. This function does just that: give it a list of
delimiters (you may need to quote it, if it contains whitespace), a
replacement, and a text to replace delimiters in, and it does the
rest.
For example, to replace tabs and spaces with a vertical bar, one
could write a template like this:
template("$(delimit \"\t \" \" \" $MESSAGE)\n")
$(env VARIABLE...)-
Have you ever felt the need to check an environment variable from
within syslog-ng? I did, and now I can.
Type hintingWhile syslog-ng supported sending log messages into various data stores and message queues for a while (SQL at first, MongoDB, JSON and AMQP later), even when those supported different types of data than strings, we could not do anything else. Until now. It is now possible - at places where it makes sense - to annotate templates with type hints, which the destination driver can optionally use. Type hinting is implemented for the
mongodb() destination and the
$(format-json) template function for now. When no type hint is specified, syslog-ng defaults to
string.To add type hints, simply wrap the respective template with the hinted type, like this:
mongodb(
value-pairs(pair("date", datetime("$UNIXDATE"))
pair("pid", int64("$PID")))
);Currently the following type hints exist:
boolean (anything that begins with a
t or
1 is true, anything that begins with
f or
0 is false, everything else is an error),
string,
literal (same as string, but not quoted if it would be quoted otherwise),
int32 (
int is an alias for this),
int64, and
datetime. Only UNIX timestamps can be type-hinted to
datetime, anything else will likely result in a casting error.It is also possible to control what happens when type casting fails: syslog-ng can drop the whole message, drop the property, or fall back to string. It can also do all of these silently:
options
typecast(on-error(silently-drop-property));
;
Using this feature with
$(format-json) is very similary too:
$(format-json date=datetime("$UNIXDATE") pid=int64("$PID"))With this feature in place, you can now store your non-string values with their proper types!
Unit suffixesUnit suffixes make it considerably easier to set limits and describe numbers within the syslog-ng configuration. We no longer need to spell out sizes to the byte precious, it is now enough to write:
log-fifo-size(200MiB). Now, syslog-ng will understand suffixes for kilo-, mega-, and giga-bytes, (
K,
M,
G, respectively) either in base-10 or base-2 (with an extra
i after the suffix). One can also omit the trailing
b from the end.So, to set the
log-fifo-size() to
2097152 bytes, one can simply use
2MiB. Or, to set it to
2000000,
2Mb. That's a whole lot easier, isn't it? No more counting zeros, no more silly typos in a ten-digit number, no more pain, but easily readable units!
Miscellaneous featuresApart from the features above, there have been a lot of other changes and improvements in the code base:
-
We now have a (mostly) non-recursive, quiet build system, which is
not only much faster than what we had before, but more reliable too,
and easier to glance through its logs, too.
-
A few old settings that were never used were removed (the
username() and password() settings of the
mongodb() driver), some were renamed and deprecated:
the replace() key transformation function of
value-pairs() was renamed to
replace-prefix(), as that makes the intent clearer. In
this latter case, the old name is still valid, but obsoleted.
-
Our integration with systemd is
much tighter now: syslog-ng can notify systemd when it is ready.
This also means that when systemd support is enabled, certain
systemd libraries will have to be installed: syslog-ng no longer
carries a convenience copy.
-
A new filter was implemented:
in-list, with which one
can implement efficient white- or blacklists.
To use it, you will need a file with one value a line, and do
something along these lines:
filter f_whitelist
in-list("/path/to/file.list", value("PROGRAM"));
;
To do a blacklist, just negate the filter:
filter f_blacklist
not in-list("/path/to/file.list", value("HOST"));
;
-
syslog-ng now supports Linux 3.5+-style
/dev/kmsg, and
will use that instead of /proc/kmsg when a sufficiently
recent kernel is detected (assuming one is using the
system() source).
The new kernel log format supports structured messages, and
syslog-ng is smart enough to parse them, and make them accessible
like all other message properties (with a .linux. prefix).
Seven hours ago I was handing out how to vote cards for the Greens at the 2013 Australian Federal election. I was hoping that either we would have a Labor/Greens coalition or an outright majority for Labor. Unfortunately we got a Liberal majority in the lower house and it looks like some extreme right wing groups may get into the senate (replacements for Family First the anti-Gay party).
For some reason the polling station where I was working only had volunteers from the three major parties (Greens, Labor, and Liberal) while other polling stations in the same electorate had volunteers from smaller parties such as the Sex Party and the Socialist Alliance.
The volunteers from the Liberal party ate McDonalds outside the polling station and afterwards McDonalds rubbish was left on the ground, the above picture isn t particularly clear because I took it after 6PM when the polls closed. The Liberals didn t care enough to put their rubbish in a bin, it s an externality for them, if they get enough seats in the senate they will surely take the same approach to governing Australia. The Labor people didn t take the effort to clean up the Liberal mess even though it wasn t particularly difficult to do so, I think that s the type of attitude that led to this election defeat. In the case of the McDonalds rubbish in question I put it in the bin so that when the primary school kids return on Monday their school won t be too messy after the election. But in the case of the mess that is being made in Australian politics it will take many more Greens votes to allow us to clean it up.
After a long pause, I have resumed my work on 
When it comes to provide redundant services, several options are available:
Let s explain it step by step:
Pretend I run a cluster, for hosting a site. Pretend that I have three-six web-nodes, and each one needs to know which database host to contact.
How do I control that?
Right now I have a /etc/settings.conf file, more or less, deployed by 
Big bad baby boomers
It is obvious that older voters prefer the conservative "coalition" parties, 57% of over-55s in particular. It is a huge jump from the 44% of voters in the age group below them.
What this table doesn't tell us is that Australia's population is top-heavy with 
Altimeter Testing at Airfest
Bdale and I, along with AJ Towns and Mike Beattie, spent last weekend
in Argonia, Kansas, flying rockets with our Kloudbusters friends at
I think of Joshua often, and wonder how life might be different were he with us
today. The long day of his delivery is one of the most poignant memories that I
will carry with me forever.
This year is the first year I've been back in Australia for Father's Day.
Father's Day in the US is in June, so it's never really been the constant
reminder that it will be back here (although I guess it'll vary year to year).
The US Labor Day long weekend tended to be the trigger holiday for me.
It's also the first year I've been separated, so this Father's Day was
particularly difficult for me, but I found I enjoyed the day with Zoe all the
more for it.
Now that I'm no longer in the US, I miss seeing Eric and Katie's daughter, as
she was my physical yardstick of how big Joshua would be today.
The Garmin 910XT is the premier GPS watch for triathlon training and racing.
The Google Summer of Code rewriting the Package Tracking System is approaching its end and I m starting to think about deploying it on debian.org. Its scope has expanded over the years and the rewritten PTS will continue this trend by bringing some new features for teams (like the possibility to subscribe to all packages of a team).
I believe that its current hostname (and name) doesn t reflect properly the role of the PTS. Add to this the fact that there s still some work left to be done to reach feature-parity with the current PTS, I m considering deploying it in parallel to the current PTS under a new name.
Package Tracking System is also a bit too long for a name, and sounds more like a description than a name
But if I get rid of packages.qa.debian.org and Package Tracking System , how should we call the new PTS? 
The PTS is a sort of central place that brings together information from many parts of Debian. It s currently mainly a consumer/dispatcher of information but I expect to integrate some of the external services that are useful for all Debian derivatives, and it will thus become more and more a producer of first-hand information as well.
To replace packages.qa.debian.org, Stefano Zacchiroli suggested me hub.debian.org and I must say I like it, it s short and relatively close to what the PTS actually is (and reminds me of 
I've been hacking on Python for a lot of years now, on various project. For
the last two years, I've beenheavily involved in
If you ever find yourself in the situation where you have to add a shell script wrapper over a command, but the parameters' quoting gets lost and you end up with the wrong parameters in the wrapped command/tool, you might want to read this post.