Search Results: "stone"

29 December 2008

John Goerzen: A Day with Jacob

Old train! Smoke inside. That s what Jacob said today when he saw an old steam locomotive at the old Union Station in Wichita, KS. Never mind that it s been sitting there for decades he s got that concept of smoke coming out of steam engines down, and apparently realizes that for smoke to come out of them, it must start out inside them. But I don t think I ve ever heard anyone talk about a steam engine in a more cute way. Two is a fun age. Today I needed to return a power supply to Circuit City, so Jacob and I made a day of it. He came with me to town (yes, us country folk go to town ). We returned the power supply, then ate lunch at a Mexican place. Jacob would call it a chips and salsa place. Today he drank from a straw for the first time, and loved it so much that I think he got more liquid than food in him over lunch. Oh well. After that, we went to the eye cream (ice cream) store - Cold Stone Creamery. Whenever Jacob hears talk of Wichita, he comments with something like Go ichita. Eat eye cream. Go town. Jacob ate his entire kid-sized chocolate ice cream with sprinkles. He loves sprinkles. While we were eating ice cream, I asked him, After you are done, would you like to see skyscrapers or trains? NO! Eat eye cream! I don t think he quite got the after bit, so I asked him again in the car after we were done eating. His eyes lit up. SEE KYCRAPER!! So we drove to downtown Wichita and saw the skyscrapers. (Yes, I am aware that other cities have much taller buildings. It doesn t matter when you re 2.) We got out of the car and he got to touch a few of them. In fact, the only way I got him back into the car without a meltdown was by pointing out the train crossing above the road on a bridge, and the fact that he d still be able to see it from in the car. That, of course, led to us needing to see trains. I drove him up the ramp to be trackside by the old Wichita Union Station. There weren t any trains going past right then, but he did get to see the locomotives at the Great Plains Transportation Museum through the fence. We started to head home, but he really wanted to see the train again. So we stopped at the park in Newton to see the old ATSF locomotive there. By that point, it was waaaay past naptime and we narrowly averted a fit when I informed him that no, we could not go inside the adjacent grain elevators. So all told, I think Jacob had a fun day with his dad. Now, in case there is any doubt out there about what kind of child Jacob is, I should point out the things he notices in church lately. First off, when we get into the sanctuary, we sit in the back. But first thing he said lately when we walked in was TWO THERMOSTATS! Yes, he saw two thermostats at opposite ends of the room up front, pointed right at them, and was very excited. He also notices the organ speakers ( oran peaker ), big cross , ceiling fans, and now furnace vents . Yes, furnace vents. At the Christmas Eve service, there was a candlelight part. He loved it. Daddy hold fire! A few people nearby smiled. While we sang Silent Night, he really wanted to blow out the candle. When it was time, I said OK Jacob, now you can blow it out. A very excited Fffffffffffffffff followed, and several people nearby were chuckling by then. I also let Jacob put the candle in the box on our way out. He said, I put fire in box. I did it!

28 December 2008

Rudy Godoy: back with the crowd

Last night I ve been recalling how many debconfs I ve already missed and this got me thinking about how long I ve been a bit off the records on my Debian involvement. Many things have happened in the last couple of years, many for the good. I ve started a business and learned a lot about entrepreneurship, resumed my computer science career, started a pretty awesome (yet to be released) personal project involving music and computers, and most important: discovered what I want from life, who I want to be and who I d love to be with :) Latest weeks I ve progresivily started to get back on track with my Debian duties. Took care of my packages, update some information, kept track on current issues and hanged on IRC. While doing that I ve found some issues I d like to elaborate on later, so we could improve things. So, expect me to be more active and post updates about my findings. It s good to be back! I ve missed you guys :)

Joachim Breitner: MuMer relaunch preview online

A few years ago, I had some ideas about a real-world trading game. In short, a combination of the game play of Settlers of Catan , the cute pseudo-medieval world of The Settlers (the computer game), which you can play in your every day live along, without having to sit in front of the computer for a long time. I then started some code, lost motivation and let it sit there for a while.Recently, I re-developed interest in the idea and started from scratch, using Haskell and HAppS. To avoid losing interest again, I m now putting the code online and set up the server. I invite everyone to play around with it, maybe have a look at the code, send me patches or comments. As you can see, the web user interface is plain ugly HTML and could need some love. Some CSS is definitely needed, some AJAX would be nice. Also, the resource tree is very small at the moment there are a lot of things to work on, even if you don t want to touch Haskell!You can register at http://mumer.net/. You will be either given a forest (a source for wood) or a source of stone. You can reap your source, and trade on the Free Market , which is where you can always trade online, at bad prices. The idea is that you find real trade partners, to get better prices.For now, trading without physical contact is possible. You can create so-called issue ids, which represent stips of paper. You can then load resources on them, and give the paper (i.e. the number) to other players, who can then redeem them. Eventually, it is planned that these pieces of paper are provided centrally and (sufficiently) unforgeable, so that it is clear who owns a resource.You can also bid on certain stuff, such as a sawmil, which allows you to turn wood into boards. It will regularily be re-leased to the highest bidder.You can get the code (in a darcs repository) from http://darcs.nomeata.de/mumer2 and also browse the code.If you happen to be at the CCC right now and would like to talk about it, please do so!

23 December 2008

Emilio Pozuelo Monfort: Collaborative maintenance

The Debian Python Modules Team is discussing which DVCS to switch to from SVN. Ondrej Certik asked how to generate a list of commiters to the team s repository, so I looked at it and got this:
emilio@saturno:~/deb/python-modules$ svn log egrep "^r[0-9]+ cut -f2 -d sed s/-guest// sort uniq -c sort -n -r
865 piotr
609 morph
598 kov
532 bzed
388 pox
302 arnau
253 certik
216 shlomme
212 malex
175 hertzog
140 nslater
130 kobold
123 nijel
121 kitterma
106 bernat
99 kibi
87 varun
83 stratus
81 nobse
81 netzwurm
78 azatoth
76 mca
73 dottedmag
70 jluebbe
68 zack
68 cgalisteo
61 speijnik
61 odd_bloke
60 rganesan
55 kumanna
52 werner
50 haas
48 mejo
45 ucko
43 pabs
42 stew
42 luciano
41 mithrandi
40 wardi
36 gudjon
35 jandd
34 smcv
34 brettp
32 jenner
31 davidvilla
31 aurel32
30 rousseau
30 mtaylor
28 thomasbl
26 lool
25 gaspa
25 ffm
24 adn
22 jmalonzo
21 santiago
21 appaji
18 goedson
17 toadstool
17 sto
17 awen
16 mlizaur
16 akumar
15 nacho
14 smr
14 hanska
13 tviehmann
13 norsetto
13 mbaldessari
12 stone
12 sharky
11 rainct
11 fabrizio
10 lash
9 rodrigogc
9 pcc
9 miriam
9 madduck
9 ftlerror
8 pere
8 crschmidt
7 ncommander
7 myon
7 abuss
6 jwilk
6 bdrung
6 atehwa
5 kcoyner
5 catlee
5 andyp
4 vt
4 ross
4 osrevolution
4 lamby
4 baby
3 sez
3 joss
3 geole
2 rustybear
2 edmonds
2 astraw
2 ana
1 twerner
1 tincho
1 pochu
1 danderson
As it s likely that the Python Applications Packaging Team will switch too to the same DVCS at the same time, here are the numbers for its repo:

emilio@saturno:~/deb/python-apps$ svn log egrep "^r[0-9]+ cut -f2 -d sed s/-guest// sort uniq -c sort -n -r
401 nijel
288 piotr
235 gothicx
159 pochu
76 nslater
69 kumanna
68 rainct
66 gilir
63 certik
52 vdanjean
52 bzed
46 dottedmag
41 stani
39 varun
37 kitterma
36 morph
35 odd_bloke
29 pcc
29 gudjon
28 appaji
25 thomasbl
24 arnau
20 sc
20 andyp
18 jalet
15 gerardo
14 eike
14 ana
13 dfiloni
11 tklauser
10 ryanakca
10 nxvl
10 akumar
8 sez
8 baby
6 catlee
4 osrevolution
4 cody-somerville
2 mithrandi
2 cjsmo
1 nenolod
1 ffm
Here I m the 4th most committer :D And while I was on it, I thought I could do the same for the GNOME and GStreamer teams:
emilio@saturno:~/deb/pkg-gnome$ svn log egrep "^r[0-9]+ cut -f2 -d sed s/-guest// sort uniq -c sort -n -r
5357 lool
2701 joss
1633 slomo
1164 kov
825 seb128
622 jordi
621 jdassen
574 manphiz
335 sjoerd
298 mlang
296 netsnipe
291 grm
255 ross
236 ari
203 pochu
198 ondrej
190 he
180 kilian
176 alanbach
170 ftlerror
148 nobse
112 marco
87 jak
84 samm
78 rfrancoise
75 oysteigi
73 jsogo
65 svena
65 otavio
55 duck
54 jcurbo
53 zorglub
53 rtp
49 wasabi
49 giskard
42 tagoh
42 kartikm
40 gpastore
34 brad
32 robtaylor
31 xaiki
30 stratus
30 daf
26 johannes
24 sander-m
21 kk
19 bubulle
16 arnau
15 dodji
12 mbanck
11 ruoso
11 fpeters
11 dedu
11 christine
10 cpm
7 ember
7 drew
7 debotux
6 tico
6 emil
6 bradsmith
5 robster
5 carlosliu
4 rotty
4 diegoe
3 biebl
2 thibaut
2 ejad
1 naoliv
1 huats
1 gilir

emilio@saturno:~/deb/pkg-gstreamer$ svn log egrep "^r[0-9]+ cut -f2 -d sed s/-guest// sort uniq -c sort -n -r
891 lool
840 slomo
99 pnormand
69 sjoerd
27 seb128
21 manphiz
8 he
7 aquette
4 elmarco
1 fabian
Conclusions:
- Why do I have the full python-modules and pkg-gstreamer trees, if I have just one commit to DPMT, and don t even have commit access to the GStreamer team?
- If you don t want to seem like you have done less commits than you have actually done, don t change your alioth name when you become a DD ;) (hint: pox-guest and piotr in python-modules are the same person)
- If the switch to a new VCS was based on a vote where you have one vote per commit, the top 3 commiters in pkg-gnome could win the vote if they chosed the same! For python-apps it s the 4 top commiters, and the 7 ones for python-modules. pkg-gstreamer is a bit special :)

22 December 2008

Josselin Mouette: Dear friendly people,

during the ongoing avalanche of posts on Planet and on Debian mailing lists where you ask everyone to be friendly and considerate, you have so far: Pretty please. What you mean is Go fuck yourself , but the way you are saying it is no more friendly and actually much more rude. If you meant Go fuck yourself , why not just say it? You are just lying to yourselves if you think your contributions to a flamewar are more friendly than others. As for those starting discussions on the community and on the code of conduct: do you want a community like Ubuntu where everyone can be scornful and prepare lousy tricks, but always preserving the appearances (thanks to a mandatory broomstick), or a community like the Linux kernel, where people say frankly what they think, even if what they think is I hope you were on crack while writing that ? I know which one I choose. I may disagree with their technical development model, but at least they know that a software community is not a group of friends. And that is a sign of maturity.

15 December 2008

MJ Ray: British Residential ISP Censorship News

Last week I reported that 95% of British Residential ISPs Censor - but I think I m OK, so I d like to quickly update on what I ve seen happen since then:-

11 December 2008

Martin-Éric Racine: xf86-video-geode 2.11.0: last call!

With yesterday's release of version 2.11.0 of the X.org driver for the Geode GX2/LX, a whole cycle was wrapped up for many of the developers involved: As such, remaining bugs and our milestone goal to merge back support for older GX1 Geodes might never be taken care of. From this perspective, we welcome active participation of new developers with access to a wide variety of Geode hardware to contribute and, eventually, take over upstream maintenance of xf86-video-geode.

6 December 2008

Jon Dowland: masterpieces

This week, BBC Radio 1's Zane Lowe played four records in their entirety as part of his "masterpieces" feature, uncensored and without interruption. These were
  • The Stones Roses - The Stone Roses
  • Rage Against the Machine - Rage Against the Machine
  • Pink Floyd - Dark Side of the Moon
  • The Prodigy - Music for the Jilted Generation
Yesterday I was browsing the iTunes music store and I noticed that these albums had jumped into the top ten best selling for their respective categories. It looks like giving the album away on air has convinced people to go out and buy the records. You can listen to the shows up to a week after they broadcast, using the BBC's "listen again" facility, now rebranded and incorporated into "iplayer".

30 November 2008

Jon Dowland: x40 suspend

Do you own a thinkpad X40, or a similar device - specifically one which needed the S3 hacks to get the backlight back on after resume? If you aren't sure, lshal grep quirk should tell you (if you have hal). You're looking for something like power_management.quirk.s3_bios = true (and s3_mode). Kernel 2.6.26 added a lot of quirk handling into the drivers, meaning an end to user-space hacks. pm-suspend, from the pm-utils package, assumes that all of these quirks have been resolved, but it seems that the S3 ones for my hardware have not. This means broken suspend/resume out-of-the-box. This is fixed in a version of pm-utils to be released in a week or thereabouts, after the freeze begins. The X40 at one point seemed to be the Debian hacker's laptop of choice. I bought mine after glowing recommendations from Steve McIntyre, Stephen Gran, Mark Hymers, Amaya Rodrigo, Daniel Stone, Matthew Garrett, Rob McQueen and several others. It's one of the best pieces of hardware I've ever had the pleasure of using, and I'm concerned that we might even be going backwards in terms of supporting this device from release-to-release. If you do have such a device, can you please try the following:
  • install the 2.6.26 kernel
  • boot into single user mode
  • modprobe i915
  • echo mem > /sys/power/state
  • resume your laptop
Please try this and report to me whether the backlight came back on - either in the discussion page for this post, or via email (jon.backlight@alcopop.org). The kernel bug to try and get this fixed is http://bugzilla.kernel.org/show_bug.cgi?id=10985, but it might not be possible to backport a fix for this to the Lenny kernel. The bug against pm-utils regarding assuming 2.6.26 is quirk-free is https://bugs.freedesktop.org/show_bug.cgi?id=16453 (Debian bug http://bugs.debian.org/488144).

16 November 2008

Bdale Garbee: Level 3!

I wrote last month about my failed first attempt to achieve a "level 3" high power rocketry certification. Last week, I learned that one of the commercial altimeters I flew for control of the ejection sequence has a firmware bug, which can cause premature ejection of the main parachute on flights above 10k feet! So it may in fact be the case that everything I did was perfect and I was simply the victim of a bug in software... how ironic! Yesterday, on my second certification attempt, I was successful! The rocket I flew this time was based on a Polecat Aerospace ten inch Goblin kit. I incorporated several modifications in my build, including additional fiberglass and carbon fiber reinforcement, and a payload bay in the nose cone. Once again, my wife Karen graced me with a parachute sewn from the Team Vatsaas design, this time a slightly larger one in burgundy and black rip-stop nylon. She incorporated several design tweaks based on her experiences sewing the first one which we'll try to write up at some point, that allowed her to sew this one in less time. The motor selected was again an Aerotech M1297W reload. The launch went perfectly, and the ascent was impressive. At apogee, the nose cone separated as planned and the drogue parachute deployed. Unfortunately, when the backup charge fired two seconds later, the main parachute also deployed. That wasn't intended... the main was supposed to deploy much lower, at 1300 feet. Luckily, the winds were light enough that the rocket touched down only about a mile downrange from the launch rail, well within the waiver distance, and was easily recovered without damage. There are three things I'll consider changing before flying this rocket again. First, the chute size calculator used to design the main parachute seems way off. The actual descent rate was around 32 feet per second, while our goal was 20. Other than that, the parachute performed admirably! Second, the premature deployment of the main at apogee could be cured by replacing the paper taped over that parachute bay with another piston capping the bay and held in with a pair of shear pins. Finally, the hard touch down snapped some of the nylon wire ties holding the batteries in place in the avionics bay. While no damage was done, and reducing the descent rate might prevent it happening again, improving the battery mounting would be an easy upgrade. For more information, see my project page for this rocket. James Russell took some pictures at the launch, including a great one of the rocket under boost just leaving the launch rail. And Jeff Lane captured video of the ascent and descent. It was a great flight and a great day, and represents a major milestone in our hobby rocket activities!

12 November 2008

MJ Ray: Webmaster Jargon for Website Owners

I wrote to a site owner last week and I thought I was writing to a webmaster. The site owner complained about some of the jargon and, while explaining who I thought I was writing for, I explained some of it because I think more website owners might benefit from these three explanations:- “Expat-like terms” - made available in a way that is freely sharable, modifiable and redistributable, similar to the Expat software package, whose terms are published at http://www.jclark.com/xml/copying.txt - this is often used as a clear, simple example for encouraging wide distribution of electronic resources (software). “clandestine Google Analytics” - Google Analytics is a service from Google, Inc for tracking users through a website in various ways. I believe the Data Protection Act means that English websites should obtain informed consent from users by publishing a Privacy Policy on their site which discloses what the GA service will be used for and linking through to GA’s own Privacy Policy. Some websites attempt to run Google Analytics on users’ computers without explaining why and without any Privacy Policy. That is what I mean by “clandestine”. “valid xhtml” - validating against the eXtensible HyperText Markup Language standards published by the World Wide Web Consortium (W3C) - the underlying language of the web. There is a test service provided at http://validator.w3.org/ and passing it is a key stepping stone towards making an accessible website. There’s not really such a thing as “invalid xhtml” - if it doesn’t pass validation, it’s not xhtml. So I guess I’m guilty of using a tautology sometimes - sorry about that. Is it worthwhile knowing those three phrases? Are there other key technical phrases which you think site owners should know?

23 October 2008

Matthew Palmer: Porting debian-installer to the DNS-323

I've just started a new job, so I decided to take a few days holiday in between and work on something that's been on my todo list for way too long now -- making the debian-installer work on the D-Link DNS-323. After a couple of days of work, I've just finished off the install of Debian on my DNS-323, which I initiated by loading a firmware image into the web interface of the stock firmware, and then SSHing into the machine at the appropriate moment. What this means is that anyone with a DNS-323 can install Debian on it. I think that's worthy of a small, quiet "woo hoo!"... Looking back now, it seems to have been a fairly simple and straightforward operation, but I can remember that it didn't look so simple when I started a week ago. So, in the interests of perhaps short-cutting someone else's adventure into the world of d-i hacking, I'm writing everything up while it's fresh in my mind (the benefits of being on holidays -- plenty of time to write long blog posts). Alternately, if anyone has a random device they'd like to see d-i on but doesn't have the inclination to do it themselves, feel free to send me one and I'll do it for you. Before I begin, I've got a few "shout outs" (I think that's what the cool kids are calling it these days) to people who've helped me along the way. First off, Martin Michlmayr has answered innumerable dumb questions from me, and I think wrote most of the parts of d-i that I've extended -- it's fair to say that I'd have had no hope of doing this without him. Thanks also to the people in #debian-boot and #debian-arm for answering questions and putting up with my frequent bouts of self-congratulation whenever I passed the most miniscule milestone. Finally, everyone who has put work into d-i has my thanks, too -- it's not perfect, but it's a damn sight better (both to use and also to hack on) than any other installer I've ever met. So, without further ado, off we go... Work out how to get a console Unless you are a guru of unbelievable skill, you will undoubtedly not do everything quite perfectly the first time, and you'll want to see the kernel/init boot messages, and maybe in some cases try some investigation and diagnostic work. For that, you're going to have to have some sort of console access. If the device doesn't have a full screen/keyboard thing going on, the chances are you'll almost certainly end up with a serial console. A few devices have a network management thingo that will give you a console, usually over VNC or some sort of horrid Java applet, but I've only ever encountered that in rackmount servers, which have a keyboard/video interface anyway... In theory, I suppose, the kernel could provide a network console, but I've never heard of such a thing being attempted, and Google is not helping me out. I might add that to the todo list as a future hacking project... On the DNS-323, it was a serial console that was needed. Like a lot of the embedded devices I've seen, it didn't quite talk RS-232, so I needed an adapter (I got a TTL-232R-3V3 USB-to-3.3v-serial adapter from a local electronics supply place, which worked perfectly with Linux as soon as I plugged it in). I needed to solder a few wires to a connecter inside, and connect that up to the USB doohickey, but it all came good in the end. The chances are someone's done a similar job for your device of choice, so a search for things like "devicename serial console" will almost certainly pay off. Work out how to load and boot a kernel/initrd Your development work will involve booting weird kernels and initial ramdisks to make everything work; you need some way of stuffing those into the device and booting from them. Everything has a boot loader of one sort or another; working out what you've got and how to make it sing and dance is the ultimate quest here. How this is done will vary greatly from device to device; the WRT-54GL, for example, waits for a tftp connection for a couple of seconds on startup, which you can use to send a new firmware; many other devices have a boot loader that you have to explicitly control (via the console), but it will make a tftp connection out to another machine if you ask it to. Some devices you just need to load the data in via serial cable (at 115200bps it's bearable; at the 9600bps I've heard some devices work at, it would be tres painful). The DNS-323 runs uBoot as the boot loader, which will do a tftp request by default. However, D-link, or Marvell, or someone in the decision-making chain for this thing decided to knobble it and removed most of the useful commands, so sending the thing via serial port is the only option. Since writing to flash takes a pile of extra time, I found (eventually) that you can just load the data into RAM somewhere and boot from there, without needing to write it to flash (also handy to avoid wasting precious write cycles), since you can tell uBoot to boot a kernel located anywhere in the address space. Obviously you need to reload the kernel/initrd on every boot if you don't write it to flash, so if you've got a "stable" kernel or initrd that you think you'll be using for a while (when you're testing the other item) you should flash it then. One note on uBoot, that took me far too long to work out -- you can't just stuff a kernel fresh off the Makefile in and assume it'll work -- uBoot needs a special header prepended that tells it all about what you're loading (architecture, file type, compression method, etc). You "wrap" a file in this uBoot header with the "mkimage" command (in the uboot-mkimage package in Debian). Incidentally, if you need to remove the uBoot bits from a file, just strip the first 64 bytes off -- that's all the uBoot header is, so something like this will do nicely:
 dd if=file.uboot of=file bs=64 skip=1
A final uBoot warning: it's fairly important to specify a "load address" for the files; if you get them wrong, your kernel and initrd may or may not boot (I never quite got the hang of why some wrong values worked and some didn't). If your device uses uBoot, and you have the ability to extract the uBoot-enabled kernel and initrd from a vendor-provided firmware image, you can use mkimage -l to inspect what all the values need to be for your own kernels and initrds. Just stick with them. Does Debian support your hardware? Obviously, if you want to run Debian on something, Debian has to support that hardware. The easiest way to test this out is to try an install. For this, you'll need to retrieve an appropriate kernel and initrd pair for the installer. Some arches, like i386 and amd64, only have one kernel and initrd for the installer, so you just have to choose if you're going to netboot, or do a full CD install, or whatever. Other arches, though, like arm, have subtly different images for different machines. There are two reasons they vary: firstly, they often need to split into subarches, where they all share a general CPU architecture but there are enough differences in the hardware that they're not all supportable by the same kernel. At a more fine-grained level some different machines of the same sub-architecture need differently formatted firmware images to boot. On ARM, in particular, it's pretty common to need to prepend a "device ID" to the kernel image so that the kernel knows what sort of machine it's booting on, which means that every machine typically needs it's own kernel image, regardless of any other issues with firmware formats. Choosing the sub-architecture should be relatively straightforward, if you know much about the machine you're targetting. Picking a machine type can be a bit harder, but again, if you know what your boot loader needs, it shouldn't be too hard to find a kernel/initrd from the existing machines in your subarch that you can mangle to fit. Load up your kernel/initrd into the device, boot it, and see how far it gets. You might get lucky, and the kernel inits, your hard drives are detected, your NIC is initialised, and you're off and running without further ado. Or you might not be so lucky. The worst case is that the kernel doesn't even get as far as loading the initrd -- it might not print anything at all, or the kernel might hang part way through the boot. This is likely to require a fair amount of debugging fun, as initial boot failures get a bit tricky. A better situation is where the kernel boots OK, and d-i starts, but something in the install process falls over. This can either be a kernel/driver problem, or a d-i problem. Either way, since d-i has started, you're likely to be able to get a shell and do some debugging. In order to make d-i work, you need to have somewhere to install to (disks, usually) and a source of packages to install from (CD/DVD if you're on a suitably large device, or the network otherwise). These are the two key ingredients you need; most everything else is stuff that ranges between "nice to have" and "critical" for operational purposes, but which has absolutely zero impact on your ability to do the install, so we'll ignore it for now. For the DNS-323, I had a few kernel problems (which I'd been warned about by Martin before I started) -- the NIC wasn't initialised with it's MAC address, which meant it was running around my Ethernet screaming "I am 00:00:00:00:00:00! Ph33r m3!", and the SATA controller just didn't seem to exist at all. These were kinda critical to doing an install, so it was time to get hacking to make those work. There were also a couple of parts of d-i that needed tweaking -- the preseeding code didn't support the device, and I needed to package a tool to build a "complete" uploadable firmware image and teach d-i how to use it. Apart from that, though, things were looking pretty good. Make the Debian kernel support your hardware Once you've worked out what hardware you need to make work, you need to dig into the kernel and fix it. Sometimes, if you're really lucky, a kernel version newer than the one currently in Debian has better support for something, and you can backport the fix / feature improvement. Other times, there's something similar already in the kernel for a different device and you can crib off that (I did this extensively for my little fixes). Then there's the "ask an expert" school, where you find someone who knows what they're on about and pick their brain (I did a bit of that, too). Finally, there's plain old "research and development", for which there are piles of documentation already out there. My changes for the DNS-323 came to 121 added lines and 16 deleted lines, most of which was cribbed-and-tweaked from other parts of the kernel. I might have written 10-20 lines of code "from scratch". It's not always scary-hard. Cross-compiling your own kernel One thing that I think needs mentioning in the kernel hacking department is cross-compiling a modified kernel for testing purposes. Chances are your main workstation has a lot more grunt (and build tools) than whatever you're trying to get Debian onto, so cross-compilation is the way to go. You need to first grab a copy of the source you want to build (from apt-get source linux-image-blahdiblah, or a release tarball, or Linus' git repo, it doesn't really matter) and a cross-compilation toolchain. For my cross-compilation toolchain, I just added this to my sources.list:
 deb http://www.emdebian.org/debian/ unstable main
then I ran apt-get update, and installed these packages:
	binutils-arm-linux-gnueabi gcc-4.1-arm-linux-gnueabi
	gcc-4.3-arm-linux-gnueabi-base libc6-dev-armel-cross
Kudos to the emdebian team for making that such an utterly painless exercise, by the way -- the days of needing to faff round with gcc sources to get a cross-compilation toolchain are apparently over. Once you've got a source tree and a cross-compiler available, you can run any of the usual kernel make commands (like make zImage or make oldconfig), as long as you've got a couple of make variables defined. In my case, I used:
 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
ARCH tells the kernel what architecture to build for (useful in all make commands because not all arches have the same config options in make menuconfig, for example) and CROSS_COMPILE tells the build system what to prefix the calls to gcc, ld and such with (if you installed the same cross-compiler packages as I did, you'll find it installs files like /usr/bin/arm-linux-gnueabi-gcc, so you can ls /usr/bin/*gcc to find out what you'll need for the CROSS_COMPILE setting). Hack d-i to make things work In addition to tweaking the kernel, it's quite possible that the internals of d-i might need some tuning. It's possible that d-i might need to be "taught" to recognise the hardware in your device, or you'll need to extend some aspect of the installation process to complete the installation. In order to hack d-i, you need to know a bit about how it works and how it is structured, so let's run through that first. The entireity of d-i is based around udebs, which are packages of the same format as "real" debs, but which have been built differently (against a small libc, for instance) and have had everything that isn't absolutely necessary (docs, non-essential scripts, extra functionality, etc) stripped out of them to create the smallest possible packages. There are a variety of different udebs -- most are derived from otherwise normal, law-abiding citizens of the archive, like busybox (basic unix utilities like cp and ls), the shell that's used in the installer, parted, various libraries, and so on. Others are "special", and have no big brother in the archive. These are mostly "task" udebs, that define what actually happens in the installer. When they're "installed", they have special fields in the package metadata that define where in the install sequence they go, and they end up on the menu you see if your installation goes a bit pear-shaped. The tricky thing about udebs is that, as small as they are, there's too many of them to be able to have them all available when the system first boots, so even the "setup" of the installation gets done in several stages. First, the kernel and initrd boot. The initrd contains just enough stuff to get access to the rest of the udebs, and nothing else. Even this early stage is built from udebs -- there's lists of what goes into the initrd for various architectures and flavours of installer under installer/build/pkg-list in the d-i SVN. If you need an extra udeb in your initrd, that's the place to specify it. Once the initrd has gotten access to a source of packages (off a CD, over the network, telepathy, whatever) it can drag the rest of the packages it needs from there. Space is still an issue at this point, though -- there's no diskspace yet to put anything onto, so everything needs to fit into a ramdisk. Don't go loading anything you don't need. The packages loaded at this stage are what defines most of the steps that will be done for the rest of the install, so once all those extra udebs are loaded, the remainder of the install kicks off and does it's thing. Different architectures and install methods have different requirements, too, which complicates matters. For example, when you're installing on a regular PC with screen/keyboard, you can guide the install using that. However, if you've got no screen, how can you control the install? There's serial consoles, but requiring everyone to void the warranty (more) on their little embedded doodad by installing a serial console cable to install Debian isn't so hot. So, lacking a terminal, how do you control the install? Well, on install flavours for devices that might be in this situation, you can SSH into the installer and complete it that way. That feature is, like everything else, provided in a udeb -- called network-console, as it happens. But what IP address do you connect to, and what network settings does the device use? Again, without a console you can't configure your network, and not everyone has a DHCP server (and even fewer people have a DHCP server that will hand out an address that they'll know in advance, or be able to find out). So, there's a udeb (called oldsys-preseed) that does it's best to configure your network based on the settings already in the nvram for your device. In short, there's a lot of tricky, well-thought-out shit going on inside d-i, and you might have to deal with a little bit of it. The nice thing is that by now I expect most of the really hard problems have been solved, so with a bit of luck you'll only ever have to do minor tweaking. In general, all of the packages that are "d-i specific" live in packages in the d-i SVN. If you need to modify a udeb, you need to rebuild it and put it in installer/build/localudebs/ (creating it first if need be) and every time you change it, you need to delete installer/build/apt.udeb/cache/. To give a concrete example (from the ever-present DNS-323), I had to modify oldsys-preseed so that it would get the details from the nvram that the stock firmware uses to configure itself. This, in turn, required that the minix-modules udeb be included in the initrd, because the DNS-323's nvram is actually a small minix partition stored in flash. Painfully, this required some more hacking, because the armel d-i kernel wasn't configured to generate minix-modules. That might need some explanation... Since building the kernel is a fairly massive undertaking, CPU-wise, instead of building all the udebs from scratch there's a package called kernel-wedge to split a real linux-image package into lots of little udebs. There's a separate source package for each architecture, linux-kernel-di-$ARCH-2.6, that contains the configuration data for kernel-wedge to specify what udebs need to be built, and what goes into each of them. A small tweak to the armel package and voila! I had a minix-modules udeb to include in the initrd. With the config stuff I'd done in the d-i build itself and my changes to oldsys-preseed, we were done with d-i. Tell d-i how to build your bootable artifacts If your device needs a "different" install image from other similar devices, you need to write some makefile rules to build those files. Look under the installer/build/config/$ARCH/ directory to see the various rules files available. I had to package a new tool to create uploadable firmware images for the DNS-323, along with adding a rule to use that tool to build images. None of it was particularly difficult. Polish the diamond Getting d-i working is only part of the battle; it's quite likely that there will be other hardware in the machine that needs to be supported. This could involve kernel-level stuff to interface to the hardware, or userland tools to manage the hardware. There's several bits in the DNS-323 that still need work; I can't control the LEDs on the front panel, nor the fan, and I can't use the on-board temperature sensors yet. But, I do have Debian running on the thing, which is what I was shooting for. Examples If you're interested in exactly what I did, there are a number of bugs in the BTS that contain the patches I made:

20 October 2008

John Goerzen: Tabor's Centennial

You know you've got a bunch of Mennonites together when the pastor spontaneously asks the church to sing "Jesus Loves Me" while the children walk up for their children's story. And, without music, everybody spontaneously breaks into beautiful 4-part harmony. It must be genetic or something.

It was a day of beautiful singing of hymns a week ago for Tabor Mennonite Church's centennial. It's hard to write about that weekend, in fact -- it was such a nice experience.

Sunday ended with opening the box sealed in the church's cornerstone back in 1965 when the current building was built. Rudy Schmidt, the person that sealed it up back then, was on hand to open it back up. They took out the stone and removed the box. Before the box was opened, Rudy told a story:

Back in 1965, I was the one to solder this box shut. While I was doing this, all of a sudden I smelled burning from inside. I figured I must have caught something inside on fire. I asked Jake Koehn (another person on the building committee) what to do. Jake said, "Nobody will ever see it again, just put it in." So let's open it!


I think Rudy has been wondering all these years whether he set it on fire or not.

The box was opened, and other than a few scorch marks on an envelope, was completely intact and in good shape. There was a copy of a local newspaper from 1965 with a headline about Goldwater, copies of programs of dedication for the new building and parsonage, a Bible, copies of the church constitution, and all sorts of other interesting things. To that we will add a copy of our centennial book (which I helped develop), CDs with recordings of our centennial activities, programs from the centennial celebration, and photos of the weekend.

Earlier on Sunday, we had a long but good worship service with sermons from two former pastors. The choir sang, including a song commissioned for the occasion by Larry Nickel. We got applause after that one (which happens occasionally, but not regularly, in our church). All the living former pastors, and the widow of one of them, served communion as well.

The service ended with the congregation singing the "Mennonite Anthem". I think it was the most beautiful singing of that song I've ever heard. We had 352 people in church that day, and it seemed that not one person was going to let the moment go by without singing.

Saturday had started off with outdoor activities in the church park. There was old-fashioned soap making, remembering how church members used to store fat all year, then get together to make soap for use in their homes and to donate to the needy. There was rope making, wool spinning, and rides for the children. Under the tent, we had some great music the local Greenhorns band, and the former pastors all shared some memories and stories about their time here.

On Saturday evening, we had a meal and a drama -- and managed to somehow fit 321 people into the church basement for the meal. We think that's a record! The drama was written for the occasion by one of our members. John Gaeddert, a pastor here in the early 1970s, has become an expert wood carver in his spare time. He had carved a piece for us to celebrate the occasion, and presented it during the drama. That fit right in, because the drama was called "Bring Your Own Hedgepost" -- back in the early days of the church, each member was supposed to do just that so they would have a place to tie their horses.

Friday night was a lecture by James Juhnke about our first paster, P. H. Richert, who was pastor for nearly 40 years. Quite entertaining and interesting.

I think the highlight of the weekend for me was getting to talk to some of the former pastors I never knew well. I had a few minutes to chat with John Gaeddert. I introduced myself, and he said, "Oh! I don't think I've met you, but I've heard your name a few times this weekend. You're on the centennial committee, right?" Yes indeed. I was born after he left this church, but he knew my grandparents -- which means he also knows exactly where we live. John and his wife Mary are both such warm and friendly people that it feels like I've known them much longer than a few days!

I got to chat with Jim Schrag too. He was pastor at Tabor until I was about 5 or 6. He didn't remember me specifically, but he was also interesting to talk with. He was one of the people that worked on a detailed history book in 1983 for the church's 75th anniversary. He told me that he processed most of the black and white photos for that book in a darkroom in his basement. I hadn't known that -- and mentioned I had found all those photos in the church archives and had scanned them all in. Jim requested a copy.

Terah found Lenore Waltner, wife of former pastor James Waltner, who passed away about a year ago. James had started his career as a pastor at Tabor, and ended it at College Mennonite Church in Goshen, IN, where Terah grew up. So she knew him, but I didn't. Terah introduced herself to Lenore, who seemed quite excited to make this sort of family connection!

And Brenda Martin Hurst, another former pastor, found Terah and introduced herself. Terah said that Brenda said something like, "Hi, I'm Brenda, and I don't think I know you!" These pastors all want to get to know everybody, I think!

17 October 2008

Russell Coker: The Next Miserable Failure?

Until very recently I thought that it would be almost impossible to get someone worse than George W Bush as the leader of any significant country. Unfortunately it seems that I was wrong and John McCain and Sarah Palin promise more of the economic, regulatory, and military disasters that are the trademarks of the US Republican party (or at least the dominant Neo-Con branch). Here are some links about John McCain: Here’s a good summary of the racial issues in the current US presidential campaign (This is Your Nation on White Privilege) [1]. The Obama campaign is highlighting the connection between John McCain and Charles Keating [2]. McCain was one of the senators helping Keating while his bank (the Lincoln Savings and Loan Association) was going under. In the end 20,000 people lost their savings and the US taxpayers ended up losing $120,000,000,000. Frank Rich has written an article for the New York Times about the racist attacks on Barack Obama [5]. The current actions of the McCain campaign only barely stop short of calling for an assassination. The South Florida Times has an interesting article about the McCain family’s history of slave ownership [7]. Now John McCain is not responsible for the actions of his great-great-grandfather in owning slaves, and there’s nothing wrong with having black relatives who are the descendants of some of those slaves (even though there is doubt about whether the female slaves were legally adults or even consented to the sex acts in question). But he should be honest about it. Denying having non-white relatives in the face of the facts seems to be strong evidence of racism. It is however understandable that John doesn’t want to discuss the fact that some of his relatives have announced plans to vote against him. Rolling Stone magazine published an interesting article about John McCain’s history as a spoiled brat in the navy [10]. It seems that if your father is an admiral you can ignore orders, crash planes, and basically do whatever you like. It also reveals that John was broken by the Viet Cong torturers and provided the name of his ship, the number of raids he had flown, his squadron number and the target of his final raid. I’m not going to criticise John for breaking under torture - I think that the assessment of wing commander John Dramesi (who was tortured by the same Viet Cong torturers but didn’t break) should be accepted. John Dramesi says that McCain “wasn’t exceptional one way or the other” while in captivity. However McCain’s use of his former POW status in propaganda is quite dishonest. John McCain is also documented as having described his wife as a “cunt” and a “trollop“. Here are some links about Sarah Palin: Former US Army Brigadier General (retired) Janis L. Karpinski writes about Sarah Palin [3], it’s interesting to hear what an intelligent female soldier has to say about her. One thing that I found noteworthy was the repeated references to “murdering” wild animals, shooting at a defenseless animal is of course quite different from shooting at a person who can shoot back (and different again from commanding an army). Janis also makes reference to Sarah setting the feminist cause back decades - I think that is what Sarah desires though. Also Janis points out the emotional problems for which pit bull terriers are known. There are many claims that Sarah is a “Maverick” and has a record of opposing corruption. This article in the Village Voice documents some of her corrupt activities - including having her home built for free in exchange for assigning the contract to build the Wasilia ice-hocky rink [4]. Thomas L. Friedman has written an article about Palin’s Kind of Patriotism [6]. According to Sarah it’s not patriotic to pay taxes, it seems to me that encouraging citizens to disobey the law should disqualify her from being elected without all the other issues. Thomas notes that Sarah is promoting the interests of Saudi Arabia by prolonging the US dependence on oil imports. The Huffington Post has an interesting article about Sarah Palin’s church [8]. It’s strange how little notice has been taken of Sarah’s former pastor who stated that people who didn’t vote for Bush were likely to go to hell. The Times has an article about “Troopergate”, some of Sarah Palin’s other corrupt practices, and the role of her husband as a shadow governor [9]. Update: Corrected URL [6].

10 October 2008

John Goerzen: One Hundred

Today, as I was riding my bicycle home from work, I noticed that the road maintainer had been by on the dirt and sand roads near our house. Unfortunately for me, he left a few sections of road with deep sand, and I almost wiped out several times. I ride a bike with narrow road tires that doesn't deal well with that.

But I'm not the first one to have a problem with roads.

A hundred years ago, the "brethren to the south" were having trouble getting to the community's main church, Alexanderwohl. Back in the days before paved roads, or heavy road-maintaining machinery, it took time and endurance to travel the distance even on good roads. A group of them started holding weekly Sunday Schools in local schoolhouses. Eventually, after much discussion, they decided to build a church, and it was completed in 1908 -- Tabor Mennonite, more than 4 miles from Alexanderwohl!

Tabor thrived over the years, though not without difficulty. Everything from how to shelter members' horses during services to what do to about the weighty social and political issues of the day were discussed and documented in church minutes. The church sent people out as missionaries, planted new churches, and supported several young pastors just starting out. In 1938, they expanded their building, and in 1965, replaced it entirely.

Tonight our weekend of centennial festivities began. It started with a prelude played on the church's first organ -- now about 90 years old if memory serves. Its current owner was tracked down, it was brought to the church, and still sounds wonderful. Tomorrow we will have music and activities outdoors under a tent, and all our living former pastors will be around, with a drama and meal in the evening. Then on Sunday, the big day with singing choirs (and a work commissioned for this occasion), each former pastor giving a short (we hope) message, a potluck (of course!), and the opening of the cornerstone.

It's been 6 years in the planning. I've spent the last couple of years collecting photos and other material for the archives and for the coffee table-style book we published for the centennial, and others have put in lots of hours too.

Sunday's worship service will conclude with singing the "Mennonite Anthem", also known as "606" from its number in an old hymnal. It will be a capella as is tradition for this piece. (Click for MP3 of a small choir singing it) It will be loud and beautiful, hundreds of voices joining in, a fitting way to mark this occasion.

What a wonderful thing we have been left by those that came before. And still, a responsibility for us as we look to the future. Rural churches are disappearing, and while Tabor is the rare rural church that is growing, still we hope that its location at the corner of two mostly dirt roads 4 miles from the nearest town (population 600) will not get in the way in years to come.

At the end of the events tonight, we were reminded of the favorite Bible verse of Rev. P. H. Richert, first pastor of Tabor, who served as pastor for almost 40 years:

the mountain of the LORD's temple will be established as chief among the mountains; it will be raised above the hills, and all nations will stream to it.


(Isaiah 2:2)

Somehow it seems improbable that dirt roads led to all this.

2 October 2008

Russell Coker: How Many Singularities?

There is a lot of discussion and speculation about The Singularity. The term seems to be defined by Ray Kurzweil’s book “The Singularity Is Near” [1] which focuses on a near-future technological singularity defined by significant increases in medical science (life extension and methods to increase mental capacity) and an accelerating rate of scientific advance. In popular culture the idea that there will only be one singularity seems to be well accepted, so the discussion is based on when it will happen. One of the definitions for a singularity is that it is a set of events that change society in significant ways such that predictions are impossible - based on the concept of the Gravitational Singularity (black hole) [2]. Science fiction abounds with stories about what happens after someone enters a black hole, so the concept of a singularity not being a single event (sic) is not unknown, but it seems to me that based on our knowledge of science no-one considers there to be a black hole with multiple singularities - not even when confusing the event horizon with the singularity. If we consider a singularity to merely consist of a significant technological change (or set of changes) that change society in ways that could not have been predicted (not merely changes that were not predicted) then it seems that there have been several already, here are the ones that seem to be likely candidates: 0) The development of speech was a significant change for our species (and a significant change OF our species). Maybe we should consider that to be singularity 0 as hominids that can’t speak probably can’t be considered human. 1) The adoption of significant tool use and training children in making and using tools (as opposed to just letting them learn by observation) made a significant change to human society. I don’t think that with the knowledge available to bands of humans without tools it would have been possible to imagine that making stone axes and spears would enable them to dominate the environment and immediately become the top of the food chain. In fact as pre-tool hominids were generally not near the top of the food chain they probably would have had difficulty imagining being rulers of the world. I’m sure that it led to an immediate arms race too. 2) The development of agriculture was a significant change to society that seems to have greatly exceeded the expectations that anyone could have had at the time. I’m sure that people started farming as merely a way of ensuring that the next time they migrated to an area there was food available (just sowing seeds along traditional migration routes for a hunter-gatherer existence). They could not have expected that the result would be a significant increase in the ability to support children and a significant increase in the number of people who could be sustained by a given land area, massive population growth, new political structures to deal with greater population density, and then wiping out hunter-gatherer societies in surrounding regions. It seems likely to me that the mental processes needed to predict the actions of a domestic animal (in terms of making it a friend, worker, or docile source of food) differ from those needed to predict the actions of other humans (who’s mental processes are similar) and from those needed to predict the actions of prey that is being hunted (you only need to understand enough to kill it). 3) The invention of writing allowed the creation of larger empires through better administration. All manner of scientific and political development was permitted by writing. 4) The work of Louis Pasteur sparked a significant development in biology which led to much greater medical technology [3]. This permitted much greater population densities (both in cities and in armies) without the the limitation of significant disease problems. It seems that among other things the world-wars depended on developments in preventing disease which were linked to Louis’ work. Large populations densely congregated in urban areas permit larger universities and a better exchange of knowledge which permitted further significant developments in technology. It seems unlikely that a population suffering the health problems that were common in 1850 could have simultaneously supported large-scale industrial warfare and major research projects such as the Manhattan Project. 5) The latest significant change in society has been the development of the Internet and mobile phones. Mobile phones were fairly obvious in concept, but have made structural changes to society. For example I doubt that hand-writing is going to be needed to any great extent in the future [4], the traditional letter has disappeared, and “Dates” are now based on “I’ll call your mobile when I’m in the area” instead of meeting at a precise time - but this is the trivial stuff. Scientific development and education have dramatically increased due to using the Internet and business now moves a lot faster due to mobile phones. It seems that nowadays any young person who doesn’t want to be single and unemployed needs to have either a mobile phone or Internet access - and preferably both. When mobile phones were first released I never expected that almost everyone would feel compelled to have one, and when I first started using the Internet in 1992 I never expected it to have the rich collaborative environment of Wikipedia, blogging, social networking, etc (I didn’t imagine anything much more advanced than file exchange and email). Of these changes the latest (Internet and mobile phones) seems at first glance to be the least significant - but let’s not forget that it’s still an ongoing process. The other changes became standard parts of society long ago. So it seems that we could count as many as six singularities, but it seems that even the most conservative count would have three singularities (tool use, agriculture, and writing). It seems to me that the major factors for a singularity are an increased population density (through couples being able to support more children, through medical technology extending the life expectancy, through greater food supplies permitting more people to live in an area, or through social structures which manage the disputes that arise when there is a great population density) and increased mental abilities (which includes better education and communication). Research into education methods is continuing, so even without genetically modified humans, surgically connecting computers to human brains, or AI we can expect intelligent beings with a significant incremental advance over current humans in the near future. Communications technology is continually being improved, with some significant advances in the user-interfaces. Even if we don’t get surgically attached communications devices giving something similar to “telepathy” (which is not far from current technology), there are possibilities for significant increments in communication ability through 3D video-conferencing, better time management of communication (inappropriate instant communication destroys productivity), and increased communication skills (they really should replace some of the time-filler subjects at high-school with something useful like how to write effective diagrams). It seems to me that going from the current situation of something significantly less than one billion people with current (poor) education and limited communications access (which most people don’t know how to use properly) to six billion people with devices that are more user-friendly and powerful than today’s computers and mobile phones combined with better education as to how to use them has the potential to increase the overall rate of scientific development by more than an order of magnitude. This in itself might comprise a singularity depending on the criteria you use to assess it. Of course that would take at least a generation to implement, a significant advance in medical technology or AI could bring about a singularity much sooner. But I feel safe in predicting that people who expect the world to remain as it is forever will be proven wrong yet again, and I also feel safe in predicting that most of them will still be alive to see it. I believe that we will have a technological singularity (which will be nothing like the “rapture” which was invented by some of the most imaginative interpretations of the bible). I don’t believe that it will be the final singularity unless we happen to make our species extinct (in which case there will most likely be another species to take over the Earth and have it’s own singularities).

26 September 2008

Christian Perrier: Painful shoulder

This week, I sufferred and still suffer from a very painful left shoulder, which handicaps me for most activities. That happened when I falled during one of my regular runs, after hitting a stone on the floor. I probably falled right on my left shoulder and, since then, it is more and more painful. This is indeed an encore of something that happened already in July when I had a very bad fall while running in the woods, because of a stupid low-level fence meant to keep boars outside the forest. I unfortunately suspect a broken shoulder or so. No run for this week-end, then. Sad, as I was indeed on my way back to long distance runs (22km last week) in an attempt to break the 30km barrier until the end of the year. I'm even handicapped for typing on my keyboard which, as my wife says, should be the final argument to bring me to a doctor and have rido exams....(I hate seeing doctors!).

13 September 2008

Gunnar Wolf: A society coerced into fear

A common trait of virtually all of the media in Mexico -and, as far as I have been able to see, in Latin America- is the push for society to be afraid. The government and the media (which go hand-in-hand, mainly due to a series of favors owed to each other - currently stemming from the government's illegitimacy and lack of trust from the general population) wants us all to think the country is as violent and as dangerous as it has never been before.
And yes, I cannot and won't try to deny that there are many critical points that need attention - But the answer cannot be militarization, cannot be further restraining the civil liberties, cannot be criminalization.
The only way to prevent crime is to reduce poverty. And poverty is not reduced by giving foreign "investors" (bah, ask people living on cities that border the USA if the maquilas have brought any kind of investment or somehow bettered the living conditions of the population!) access to segments of the economy so far limited to the government - Poverty will only be reduced when the government starts reviewing the tax systems to remove the legal loopholes that make it possible for a large enterprise to get tax exemptions on most of their income, and make the lower income people pay zero taxes, even get social aid.
But back to the topic: Since the 1994 crisis (the "decembrine errors"), we are being constantly bombed about the raging insecurity in Mexico. Maybe we have been bombed with that same ideas for more time, but I was not very politically conscious before that. When things go a bit smoother on the political side, the media relaxes the "we are so fucked" mantram.
When our de facto president current ruler took power, on December 2006, he had so much opposition he could not for months attend a single public event. So far, he is still avoiding them; everywhere he goes, the place must be cleared and sanitized of anybody who might show he just does not agree with the imposition we had. What was his first government action? To decree that every branch of the government would get a 10% budget cut on the salaries - but the security forces (the army, the different police corporations) would have a 46% raise.
After almost two years of ineptitude, they keep chanting the old "oh, we are living such dangerous times" mantra. The security forces recently got yet another raise, and everybody in the media says this country cannot be lived in anymore.
And people buy that crap.
Up to a month or two ago, the general outcry is that the drug lords had taken over the country - And, yes, in several areas of Mexico, their presence is bigger than the official security, or the security agencies are completely coopted by them. But not even His Majesty Felipe Calder n I "El Ileg timo" can say with a straight face that "we are winning the war against the drug lords" (a war brought by himself, of course - Think of it as Mexico's Irak. Think of Calder n as Mexico's Bush.) - A new attention sink was needed.
Of course, this country is not safer than Finland. But crimes do happen there as they happen here. Here, we have got a tremendous movement because of one brutal kidnapping in August, and everybody now thinks that everybody is at risk of dying kidnapped.
So today, after over a month of bombarding us with fear about kidnaps, I am sick of reading stupid reactions. What made me post this was a request for ideas at a local Free Software-related portal about monitoring known potential criminals. Of course, such a proposal would violate the right to anonimity and to lead a personal life even a convicted criminal has. And, of course, the cries of people that think the society should castrate rapists and kill kidnappers, basically going back 4000 years in history. People, let me hand you a stone and a stick so you can club the whole society to death.
The first step towards getting out of this security nightmare perception we have is to be critical towards what the media tells us - and to understand (and _really_ understand. I won't buy your argument that "it's easier to rob somebody for MX$4000 than to work a full day for MX$100", as it's only easier on one level, but it is a tremendous cost on many others) what makes good people act against the society.

4 September 2008

Mirco Bauer: Smuxi 0.6.2 + Translations + Distribution

Here some news from the Smuxi front. As you might already know Smuxi 0.6.2 was released. With the 0.6.2 release we have now German translation and Smuxi packages in Debian (Unstable) (as promised), Ubuntu (intrepid) and ArchLinux (AUR)! Now just OpenSUSE, Foresight Linux, Gentoo and Fedora are missing for world domination^W^Wconvering the major Linux distributions. The upcoming 0.6.3 release will contain Spanish (thanks to Juan Miguel Carrero), French (thanks to Clement BOURGEOIS) and British English (thanks to Ryan Smith-Evans) translations. Besides bugfixes this release will contain the famous tray icon support and some other goodies! smile.png The release should be ready by this weekend... stay tuned.

21 August 2008

MJ Ray: Would Debian Lists Send Scunthorpe to Coventry?

I had a small chuckle at the delay to Debian Project news because the listserver filter treated it as if an event was on Free Ando Penis Land. Parties in Scunthorpe and Penistone may have a similar problem. At least it got through eventually. If only Yahoo was as responsive as debian listmasters… Incidentally, while trying a web search for “the Scunthorpe Problem”, I got an intermediate screen warning me that the results may contain “adult content” but none of the results looked like they were more than 18 years old.

Next.

Previous.