Why make Debian for Raspberry Pi build again? There is an available set of images for running Debian in Raspberry Pi computers (all models below the 5 series)! However, the maintainer severely lacking time to take care for them; called for help for somebody to adopt them, but have not been successful. The image generation scripts might have bitrotted a bit, but it is mostly all done. And there is a lot of interest and use still in having the images freshly generated and decently tested! This GSoC project is about getting the [https://raspi.debian.net/ Raspberry Pi Debian images] site working reliably, daily-built images become automatic again and ideally making it easily deployable to be run in project machines and migrating exsisting hosting infrastructure to Debian.

How much it differ from Debian build process? While the goal is to stay as close as possible to the Debian build process, Raspberry Pi boards require some necessary platform-specific changes primarily in the early boot sequence and firmware handling. Unlike typical Debian systems, Raspberry Pi boards depend on a non-standard bootloader and use non-free firmware (raspi-firmware), Introducing some hardware-specific differences in the initialization process. These differences are largely confined to the early boot and hardware initialization stages. Once the system boots, the userspace remains closely aligned with a typical Debian install, using Debian packages. The current modifications are required due to non-free firmware. However, several areas merit review: but there are a few parts that might be worth changing.

1. Boot flow: Transitioning to a U-Boot based boot process (as used in Debian installer images for many other SBCs) would reduce divergence and better align with Debian Installer.
2. Current scripts/workarounds: Some existing hacks may now be redundant with recent upstream support and could be removed.
3. Board-specific images: Shift to architecture-specific base images with runtime detection could simplify builds and reduce duplication.

Debian already already building SD card images for a wide range of SBCs (e.g., BeagleBone, BananaPi, OLinuXino, Cubieboard, etc.) installer-arm64/images/u-boot and installer-armhf/images/u-boot, a similar approach for Raspberry Pi could improve maintainability and consistency with Debian s broader SBC support.

Quoted from Mail Discussion Thread with Mentor (Gunnar Wolf)

"One direction we wanted to explore was whether we should still be building one image per family, or whether we could instead switch to one image per architecture (armel, armhf, arm64). There were some details to iron out as RPi3 and RPi4 were quite different, but I think it will be similar to the differences between the RPi 0 and 1, which are handled at first-boot time. To understand what differs between families, take a look at Cyril Brulebois generate-recipe (in the repo), which is a great improvement over the ugly mess I had before he contributed it"

In this project, I intend to to build one image per architecture (armel, armhf, arm64) rather than continuing with the current model of building one image per board. This change simplifies image management, reduces redundancy, and leverages dynamic configuration at boot time to support all supported boards within each architecture. By using U-Boot and flash-kernel, we can detect the board type and configure kernel parameters, DTBs, and firmware during the first boot, reducing duplication across images and simplifying the maintenance burden and we can also generalize image creation while still supporting board-specific behavior at runtime. This method aligns with existing practices in the DebianInstaller team and aligns with Debian s long-term maintainability goals and better leverages upstream capabilities, ensuring a consistent and scalable boot experience. To streamline and standardize the process of building bootable Debian images for Raspberry Pi devices, I proposed a new workflow that leverages U-Boot and flash-kernel Debian packages. This provides a clean, maintainable, and reproducible way to generate images for armel, armhf and arm64 boards. The workflow is vmdb2, a lightweight, declarative tool designed to automate the creation of disk images. A typical vmdb2 recipe defines the disk layout, base system installation (via debootstrap), architecture-specific packages, and any custom post-install hooks and the image should includes U-Boot (the u-boot-rpi package), flash-kernel, and a suitable Debian kernel package like linux-image-arm64 or linux-image-armmp. U-Boot serves as the platform s bootloader and is responsible for loading the kernel and initramfs. Unlike Raspberry Pi s non-free firmware/proprietary bootloader, U-Boot provides an open and scriptable interface, allowing us to follow a more standard Debian boot process. It can be configured to boot using either an extlinux.conf or a boot.scr script generated automatically by flash-kernel. The role of flash-kernel is to bridge Debian s kernel installation system with the specifics of embedded bootloaders like U-Boot. When installed, it automatically copies the kernel image, initrd, and device tree blobs (DTBs) to the /boot partition. It also generates the necessary boot.scr script if the board configuration demands it. To work correctly, flash-kernel requires that the target machine be identified via /etc/flash-kernel/machine, which must correspond to an entry in its internal machine database.\ Once the vmdb2 build is complete, the resulting image will contain a fully configured bootable system with all necessary boot components correctly installed. The image can be flashed to an SD card and used to boot on the intended device without additional manual configuration. Because all key packages (U-Boot, kernel, flash-kernel) are managed through Debian s package system, kernel updates and boot script regeneration are handled automatically during system upgrades.

Current Workflow: Builds one Image per family The current vmdb2 recipe uses the Raspberry Pi GPU bootloader provided via the raspi-firmware package. This is the traditional boot process followed by Raspberry Pi OS, and it s tightly coupled with firmware files like bootcode.bin, start.elf, and fixup.dat. These files are installed to /boot/firmware, which is mounted from a FAT32 partition labeled RASPIFIRM. The device tree files (*.dtb) are manually copied from /usr/lib/linux-image-*-arm64/broadcom/ into this partition. The kernel is installed via the linux-image-arm64 package, and the boot arguments are injected by modifying /boot/firmware/cmdline.txt using sed commands. Booting depends on the root partition being labeled RASPIROOT, referenced through that file. There is no bootloader like UEFI-based or U-Boot involved the Raspberry Pi firmware directly loads the kernel, which is standard for Raspberry Pi boards.

- apt: install
  packages:
    ...
    - raspi-firmware  

The boot partition contents and kernel boot setup are tightly controlled via scripting in the recipe. Limitations of Current Workflow: While this setup works, it is

1. Proprietary and Raspberry Pi specific It relies on the closed-source GPU bootloader the raspi-firmware package, which is tightly coupled to specific Raspberry Pi models.
2. Manual DTB handling Device tree files are manually copied and hardcoded, making upgrades or board-specific changes error-prone.
3. Not easily extendable to future Raspberry Pi boards Any change in bootloader behavior (as seen in the Raspberry Pi 5, which introduces a more flexible firmware boot process) would require significant rework.
4. No UEFI-based/U-Boot The current method bypasses the standard bootloader layers, making it inconsistent with other Debian ARM platforms and harder to maintain long-term.

As Raspberry Pi firmware and boot processes evolve, especially with the introduction of Pi 5 and potentially Pi 6, maintaining compatibility will require more flexibility - something best delivered by adopting U-Boot and flash-kernel.

New Workflow: Building Architecture-Specific Images with vmdb2, U-Boot, flash-kernel, and Debian Kernel This workflow outlines an improved approach to generating bootable Debian images architecture specific, using vmdb2, U-Boot, flash-kernel, and Debian kernels and also to move away from Raspberry Pi s proprietary bootloader to a fully open-source boot process which improves maintainability, consistency, and cross-board support.

New Method: Shift to U-Boot + flash-kernel U-Boot (via Debian su-boot-rpi package) and flash-kernel bring the image building process closer to how Debian officially boots ARM devices. flash-kernel integrates with the system s initramfs and kernel packages to install bootloaders, prepare boot.scr or extlinux.conf, and copy kernel/initrd/DTBs to /boot in a format that U-Boot expects. U-Boot will be used as a second-stage bootloader, loaded by the Raspberry Pi s built-in firmware. Once U-Boot is in place, it will read standard boot scripts ( boot.scr) generated by flash-kernel, providing a Debian-compatible and board-flexible solution. Extending YAML spec for vmdb2 build with U-Boot and flash-kernel To improve an existing vmdb2 YAML spec(https://salsa.debian.org/raspi-team/image-specs/raspi_master.yaml), to integrate U-Boot, flash-kernel, and the architecture-specific Debian kernel into the image build process. By incorporating u-boot-rpi and flash-kernel from Debian packages, alongside the standard initramfs-tools, we align the image closer to Debian best practices while supporting both armhf and arm64 architectures. Below are key additions and adjustments needed in a vmdb2 YAML spec to support the workflow: Install U-Boot, flash-kernel, initramfs-tools and the architecture-specific Debian kernel.

- apt: install
  packages:
    - u-boot-rpi
    - flash-kernel
    - initramfs-tools
    - linux-image-arm64 # or linux-image-armmp for armhf 
  tag: tag-root

Replace linux-image-arm64 with the correct kernel package for specific target architecture. These packages should be added under the tag-root section in YAML spec for vmdb2 build recipe. This ensures that the necessary bootloader, kernel, and initramfs tools are included and properly configured in the image. Configure Raspberry Pi firmware to Load U-Boot Install the U-Boot binary as kernel.img in /boot/firmware we can also download and build U-Boot from source, but Debian provides tested binaries.

- shell:  
    cp /usr/lib/u-boot/rpi_4/u-boot.bin $ ROOT? /boot/firmware/kernel.img
    echo "enable_uart=1" >> $ ROOT? /boot/firmware/config.txt
  root-fs: tag-root

This makes the RPi firmware load u-boot.bin instead of the Linux kernel directly. Set Up flash-kernel for Debian-style Boot flash-kernel integrates with initramfs-tools and writes boot config suitable for U-Boot. We need to make sure /etc/flash-kernel/db contains an entry for board (most Raspberry Pi boards already supported in Bookworm). Set up /etc/flash-kernel.conf with:

- create-file: /etc/flash-kernel.conf
  contents:  
    MACHINE="Raspberry Pi 4"
    BOOTPART="/dev/disk/by-label/RASPIFIRM"
    ROOTPART="/dev/disk/by-label/RASPIROOT"
  unless: rootfs_unpacked

This allows flash-kernel to write an extlinux.conf or boot.scr into /boot/firmware. Clean up Proprietary/Non-Free Firmware Bootflow Remove the direct kernel loading flow:

- shell:  
    rm -f $ ROOT? /boot/firmware/vmlinuz*
    rm -f $ ROOT? /boot/firmware/initrd.img*
    rm -f $ ROOT? /boot/firmware/cmdline.txt
  root-fs: tag-root

Let U-Boot and flash-kernel manage kernel/initrd and boot parameters instead. Boot Flow After This Change

[SoC ROM] -> [start.elf] -> [U-Boot] -> [boot.scr] -> [Linux Kernel]

1. This still depends on the Raspberry Pi firmware to start, but it only loads U-Boot, not Linux kernel.
2. U-Boot gives you more flexibility (e.g., networking, boot menus, signed boot).
3. Using flash-kernel ensures kernel updates are handled the Debian Installer way.
4. Test with a serial console (enable_uart=1) in case HDMI doesn t show early boot logs.

Advantage of New Workflow

1. Replaces the proprietary Raspberry Pi bootloader with upstream U-Boot.
2. Debian-native tooling Uses flash-kernel and initramfs-tools to manage boot configuration.
3. Consistent across boards Works for both armhf and arm64, unifying the image build process.
4. Easier to support new boards Like the Raspberry Pi 5 and future models.

This transition will standardize a bit image-building process, making it aligned with upstream Debian Installer workflows.

vmdb2 configuration for arm64 using u-boot and flash-kernel NOTE: This is a baseline example and may require tuning.

# Raspberry Pi arm64 image using U-Boot and flash-kernel
steps:
  # ... (existing mkimg, partitions, mount, debootstrap, etc.) ...
  # Install U-Boot, flash-kernel, initramfs-tools and architecture specific kernel
  - apt: install
    packages:
      - u-boot-rpi
      - flash-kernel
      - initramfs-tools
      - linux - image - arm64 # or linux - image - armmp for armhf
    tag: tag-root
  # Install U-Boot binary as kernel.img in firmware partition
  - shell:  
      cp /usr/lib/u-boot/rpi_arm64 /u-boot.bin $ ROOT? /boot/firmware/kernel.img
      echo "enable_uart=1" >> $ ROOT? /boot/firmware/config.txt
    root-fs: tag-root
  # Configure flash-kernel for Raspberry Pi
  - create-file: /etc/flash-kernel.conf
    contents:  
      MACHINE="Generic Raspberry Pi ARM64"
      BOOTPART="/dev/disk/by-label/RASPIFIRM"
      ROOTPART="/dev/disk/by-label/RASPIROOT"
    unless: rootfs_unpacked
  # Remove direct kernel boot files from Raspberry Pi firmware
  - shell:  
      rm -f $ ROOT? /boot/firmware/vmlinuz*
      rm -f $ ROOT? /boot/firmware/initrd.img*
      rm -f $ ROOT? /boot/firmware/cmdline.txt
    root-fs: tag-root
  # flash-kernel will manage boot scripts and extlinux.conf
  # Rest of image build continues...

Required Changes to Support Raspberry Pi Boards in Debian (flash-kernel + U-Boot)

Overview of Required Changes

Component	Required Task
Debian U-Boot Package	Add build target for rpi_arm64 in u-boot-rpi. Optionally deprecate legacy 32-bit targets.
Debian flash-kernel Package	Add or verify entries in db/all.db for Pi 4, Pi 5, Zero 2W, CM4. Ensure boot script generation works via bootscr.uboot-generic.
Debian Kernel	Ensure DTBs are installed at /usr/lib/linux-image-<version>/ and available for flash-kernel to reference.

flash-kernel

Already Supported Boards in flash-kernel Debian Package https://sources.debian.org/src/flash-kernel/3.109/db/all.db/#L1700

Model	Arch	DTB-Id
Raspberry Pi 1 A/B/B+, Rev2	armel	bcm2835-*
Raspberry Pi CM1	armel	bcm2835-rpi-cm1-io1.dtb
Raspberry Pi Zero/Zero W	armel	bcm2835-rpi-zero*.dtb
Raspberry Pi 2B	armhf	bcm2836-rpi-2-b.dtb
Raspberry Pi 3B/3B+	arm64	bcm2837-*
Raspberry Pi CM3	arm64	bcm2837-rpi-cm3-io3.dtb
Raspberry Pi 400	arm64	bcm2711-rpi-400.dtb

uboot

Already Supported Boards in Debian U-Boot Package https://salsa.debian.org/installer-team/flash-kernel/-/blob/master/db/all.db

arm64 Model Arch Upstream Defconfig Debian Target - - - Raspberry Pi 3B arm64 rpi_3_defconfig rpi_3 Raspberry Pi 4B arm64 rpi_4_defconfig rpi_4 Raspberry Pi 3B/3B+/CM3/CM3+/4B/CM4/400/5B/Zero 2W arm64 rpi_arm64_defconfig rpi_arm64

armhf Model Arch Upstream Defconfig Debian Target - - - Raspberry Pi 2 armhf rpi_2_defconfig rpi_2 Raspberry Pi 3B (32-bit) armhf rpi_3_32b_defconfig rpi_3_32b Raspberry Pi 4B (32-bit) armhf rpi_4_32b_defconfig rpi_4_32b

armel Model Arch Upstream Defconfig Debian Target - - - Raspberry Pi armel rpi_defconfig rpi Raspberry Pi 1/Zero armel rpi_0_w rpi_0_w These boards are already defined in debian/rules under the u-boot-rpi source package and generates usable U-Boot binaries for corresponding Raspberry Pi models.

To-Do: Add Missing Board Support to U-Boot and flash-kernel in Debian Several Raspberry Pi models are missing from the Debian U-Boot and flash-kernel packages, even though upstream support and DTBs exist in the Debian kernel but are missing entries in the flash-kernel database to enable support for bootloader installation and initrd handling.

Boards Not Yet Supported in flash-kernel Debian Package

Model	Arch	DTB-Id
Raspberry Pi 3A+ (32 & 64 bit)	armhf, arm64	bcm2837-rpi-3-a-plus.dtb
Raspberry Pi 4B (32 & 64 bit)	armhf, arm64	bcm2711-rpi-4-b.dtb
Raspberry Pi CM4	arm64	bcm2711-rpi-cm4-io.dtb
Raspberry Pi CM 4S	arm64	-
Raspberry Zero 2 W	arm64	bcm2710-rpi-zero-2-w.dtb
Raspberry Pi 5	arm64	bcm2712-rpi-5-b.dtb
Raspberry Pi CM5	arm64	-
Raspberry Pi 500	arm64	-

Boards Not Yet Supported in Debian U-Boot Package

Model	Arch	Upstream defconfig(s)
Raspberry Pi 3A+/3B+	arm64	-, rpi_3_b_plus_defconfig
Raspberry Pi CM 4S	arm64	-
Raspberry Pi 5	arm64	-
Raspberry Pi CM5	arm64	-
Raspberry Pi 500	arm64	-

So, what next? During the Community Bonding Period, I got hands-on with workflow improvements, set up test environments, and began reviewing Raspberry Pi support in Debian s U-Boot and flash-kernel and these are the logs of the project, where I provide weekly reports on the work done. You can check here: Community Bonding Period logs. My next steps include submitting patches to the u-boot and flash-kernel packages to ensure all missing Raspberry Pi entries are built and shipped. And, also to confirm the kernel DTB installation paths and make sure the necessary files are included for all Raspberry Pi variants. Finally, plan to validate changes with test builds on Raspberry Pi hardware. In parallel, I m organizing my tasks and setting up my environment to contribute more effectively. It s been exciting to explore how things work under the hood and to prepare for a summer of learning and contributing to this great community.

Helpful links

• https://wiki.debian.org/SummerOfCode2025/ApprovedProjects/MakeDebianForRaspberryBuildAgain
• https://docs.u-boot.org/en/latest/board/broadcom/raspberrypi.html
• https://manpages.debian.org/unstable/flash-kernel/flash-kernel.8.en.html
• Progress Tracker: https://krvprashanth.in/gsoc2025/docs/weeklyprogress/
• Building Debian system images with vmdb2

• My friend Gabriel F. T. Gomes, who helped with debugging and simply talking about the issue. I love doing some pair debugging, and I noticed that he also had a great time diving into the internals of glibc and libgcc.
• My teammate Dann Frazier, who always provides invaluable insights and was there to motivate me to push a bit further in order to figure out what was going on.
• The upstream GCC and glibc developers who finally drove the investigation to completion and came up with an elegant fix.

The background story Wolfi OS takes security seriously, and one of the things we have is a package which sets the hardening compiler flags for C/C++ according to the best practices recommended by OpenSSF. At the time of this writing, these flags are (in GCC s spec file parlance):

*self_spec:
+ % !O:% !O1:% !O2:% !O3:% !O0:% !Os:% !0fast:% !0g:% !0z:-O2  -fhardened -Wno-error=hardened -Wno-hardened % !fdelete-null-pointer-checks:-fno-delete-null-pointer-checks  -fno-strict-overflow -fno-strict-aliasing % !fomit-frame-pointer:-fno-omit-frame-pointer  -mno-omit-leaf-frame-pointer
*link:
+ --as-needed -O1 --sort-common -z noexecstack -z relro -z now

The important part for our bug is the usage of -z now and -fno-strict-aliasing. As I was saying, these flags are set for almost every build, but sometimes things don t work as they should and we need to disable them. Unfortunately, one of these problematic cases has been glibc. There was an attempt to enable hardening while building glibc, but that introduced a strange breakage to several of our packages and had to be reverted. Things stayed pretty much the same until a few weeks ago, when I started working on one of my roadmap items: figure out why hardening glibc wasn t working, and get it to work as much as possible.

Reproducing the bug I started off by trying to reproduce the problem. It s important to mention this because I often see young engineers forgetting to check if the problem is even valid anymore. I don t blame them; the anxiety to get the bug fixed can be really blinding. Fortunately, I already had one simple test to trigger the failure. All I had to do was install the py3-matplotlib package and then invoke:

$ python3 -c 'import matplotlib'

This would result in an abortion with a coredump. I followed the steps above, and readily saw the problem manifesting again. OK, first step is done; I wasn t getting out easily from this one.

Initial debug The next step is to actually try to debug the failure. In an ideal world you get lucky and are able to spot what s wrong after just a few minutes. Or even better: you also can devise a patch to fix the bug and contribute it to upstream. I installed GDB, and then ran the py3-matplotlib command inside it. When the abortion happened, I issued a backtrace command inside GDB to see where exactly things had gone wrong. I got a stack trace similar to the following:

#0  0x00007c43afe9972c in __pthread_kill_implementation () from /lib/libc.so.6
#1  0x00007c43afe3d8be in raise () from /lib/libc.so.6
#2  0x00007c43afe2531f in abort () from /lib/libc.so.6
#3  0x00007c43af84f79d in uw_init_context_1[cold] () from /usr/lib/libgcc_s.so.1
#4  0x00007c43af86d4d8 in _Unwind_RaiseException () from /usr/lib/libgcc_s.so.1
#5  0x00007c43acac9014 in __cxxabiv1::__cxa_throw (obj=0x5b7d7f52fab0, tinfo=0x7c429b6fd218 <typeinfo for pybind11::attribute_error>, dest=0x7c429b5f7f70 <pybind11::reference_cast_error::~reference_cast_error() [clone .lto_priv.0]>)
    at ../../../../libstdc++-v3/libsupc++/eh_throw.cc:93
#6  0x00007c429b5ec3a7 in ft2font__getattr__(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >) [clone .lto_priv.0] [clone .cold] () from /usr/lib/python3.13/site-packages/matplotlib/ft2font.cpython-313-x86_64-linux-gnu.so
#7  0x00007c429b62f086 in pybind11::cpp_function::initialize<pybind11::object (*&)(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >), pybind11::object, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, pybind11::name, pybind11::scope, pybind11::sibling>(pybind11::object (*&)(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >), pybind11::object (*)(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >), pybind11::name const&, pybind11::scope const&, pybind11::sibling const&):: lambda(pybind11::detail::function_call&)#1 ::_FUN(pybind11::detail::function_call&) [clone .lto_priv.0] ()
   from /usr/lib/python3.13/site-packages/matplotlib/ft2font.cpython-313-x86_64-linux-gnu.so
#8  0x00007c429b603886 in pybind11::cpp_function::dispatcher(_object*, _object*, _object*) () from /usr/lib/python3.13/site-packages/matplotlib/ft2font.cpython-313-x86_64-linux-gnu.so
...

Huh. Initially this didn t provide me with much information. There was something strange seeing the abort function being called right after _Unwind_RaiseException, but at the time I didn t pay much attention to it. OK, time to expand our horizons a little. Remember when I said that several of our packages would crash with a hardened glibc? I decided to look for another problematic package so that I could make it crash and get its stack trace. My thinking here is that maybe if I can compare both traces, something will come up. I happened to find an old discussion where Dann Frazier mentioned that Emacs was also crashing for him. He and I share the Emacs passion, and I totally agreed with him when he said that Emacs crashing is priority -1! (I m paraphrasing). I installed Emacs, ran it, and voil : the crash happened again. OK, that was good. When I ran Emacs inside GDB and asked for a backtrace, here s what I got:

#0  0x00007eede329972c in __pthread_kill_implementation () from /lib/libc.so.6
#1  0x00007eede323d8be in raise () from /lib/libc.so.6
#2  0x00007eede322531f in abort () from /lib/libc.so.6
#3  0x00007eede262879d in uw_init_context_1[cold] () from /usr/lib/libgcc_s.so.1
#4  0x00007eede2646e7c in _Unwind_Backtrace () from /usr/lib/libgcc_s.so.1
#5  0x00007eede3327b11 in backtrace () from /lib/libc.so.6
#6  0x000059535963a8a1 in emacs_backtrace ()
#7  0x000059535956499a in main ()

Ah, this backtrace is much simpler to follow. Nice. Hmmm. Now the crash is happening inside _Unwind_Backtrace. A pattern emerges! This must have something to do with stack unwinding (or so I thought keep reading to discover the whole truth). You see, the backtrace function (yes, it s a function) and C++ s exception handling mechanism use similar techniques to do their jobs, and it pretty much boils down to unwinding frames from the stack. I looked into Emacs source code, specifically the emacs_backtrace function, but could not find anything strange over there. This bug was probably not going to be an easy fix

The quest for a minimal reproducer Being able to easily reproduce the bug is awesome and really helps with debugging, but even better is being able to have a minimal reproducer for the problem. You see, py3-matplotlib is a huge package and pulls in a bunch of extra dependencies, so it s not easy to ask other people to just install this big package plus these other dependencies, and then run this command , especially if we have to file an upstream bug and talk to people who may not even run the distribution we re using. So I set up to try and come up with a smaller recipe to reproduce the issue, ideally something that s not tied to a specific package from the distribution. Having all the information gathered from the initial debug session, especially the Emacs backtrace, I thought that I could write a very simple program that just invoked the backtrace function from glibc in order to trigger the code path that leads to _Unwind_Backtrace. Here s what I wrote:

#include <execinfo.h>

int
main(int argc, char *argv[])
 
  void *a[4096];
  backtrace (a, 100);
  return 0;
 

After compiling it, I determined that yes, the problem did happen with this small program as well. There was only a small nuisance: the manifestation of the bug was not deterministic, so I had to execute the program a few times until it crashed. But that s much better than what I had before, and a small price to pay. Having a minimal reproducer pretty much allows us to switch our focus to what really matters. I wouldn t need to dive into Emacs or Python s source code anymore. At the time, I was sure this was a glibc bug. But then something else happened.

GCC 15 I had to stop my investigation efforts because something more important came up: it was time to upload GCC 15 to Wolfi. I spent a couple of weeks working on this (it involved rebuilding the whole archive, filing hundreds of FTBFS bugs, patching some programs, etc.), and by the end of it the transition went smooth. When the GCC 15 upload was finally done, I switched my focus back to the glibc hardening problem. The first thing I did was to yes, reproduce the bug again. It had been a few weeks since I had touched the package, after all. So I built a hardened glibc with the latest GCC and the bug did not happen anymore! Fortunately, the very first thing I thought was this must be GCC , so I rebuilt the hardened glibc with GCC 14, and the bug was there again. Huh, unexpected but very interesting.

Diving into glibc and libgcc At this point, I was ready to start some serious debugging. And then I got a message on Signal. It was one of those moments where two minds think alike: Gabriel decided to check how I was doing, and I was thinking about him because this involved glibc, and Gabriel contributed to the project for many years. I explained what I was doing, and he promptly offered to help. Yes, there are more people who love low level debugging! We spent several hours going through disassembles of certain functions (because we didn t have any debug information in the beginning), trying to make sense of what we were seeing. There was some heavy GDB involved; unfortunately I completely lost the session s history because it was done inside a container running inside an ephemeral VM. But we learned a lot. For example:

• It was hard to actually understand the full stack trace leading to uw_init_context_1[cold]. _Unwind_Backtrace obviously didn t call it (it called uw_init_context_1, but what was that [cold] doing?). We had to investigate the disassemble of uw_init_context_1 in order to determined where uw_init_context_1[cold] was being called.
• The [cold] suffix is a GCC function attribute that can be used to tell the compiler that the function is unlikely to be reached. When I read that, my mind immediately jumped to this must be an assertion , so I went to the source code and found the spot.
• We were able to determine that the return code of uw_frame_state_for was 5, which means _URC_END_OF_STACK. That s why the assertion was triggering.

After finding these facts without debug information, I decided to bite the bullet and recompiled GCC 14 with -O0 -g3, so that we could debug what uw_frame_state_for was doing. After banging our heads a bit more, we found that fde is NULL at this excerpt:

// ...
  fde = _Unwind_Find_FDE (context->ra + _Unwind_IsSignalFrame (context) - 1,
                          &context->bases);
  if (fde == NULL)
     
#ifdef MD_FALLBACK_FRAME_STATE_FOR
      /* Couldn't find frame unwind info for this function.  Try a
         target-specific fallback mechanism.  This will necessarily
         not provide a personality routine or LSDA.  */
      return MD_FALLBACK_FRAME_STATE_FOR (context, fs);
#else
      return _URC_END_OF_STACK;
#endif
     
// ...

We re debugging on amd64, which means that MD_FALLBACK_FRAME_STATE_FOR is defined and therefore is called. But that s not really important for our case here, because we had established before that _Unwind_Find_FDE would never return NULL when using a non-hardened glibc (or a glibc compiled with GCC 15). So we decided to look into what _Unwind_Find_FDE did. The function is complex because it deals with .eh_frame , but we were able to pinpoint the exact location where find_fde_tail (one of the functions called by _Unwind_Find_FDE) is returning NULL:

if (pc < table[0].initial_loc + data_base)
  return NULL;

We looked at the addresses of pc and table[0].initial_loc + data_base, and found that the former fell within libgcc s text section, which the latter fell within /lib/ld-linux-x86-64.so.2 text. At this point, we were already too tired to continue. I decided to keep looking at the problem later and see if I could get any further.

Bisecting GCC The next day, I woke up determined to find what changed in GCC 15 that caused the bug to disappear. Unless you know GCC s internals like they are your own home (which I definitely don t), the best way to do that is to git bisect the commits between GCC 14 and 15. I spent a few days running the bisect. It took me more time than I d have liked to find the right range of commits to pass git bisect (because of how branches and tags are done in GCC s repository), and I also had to write some helper scripts that:

• Modified the gcc.yaml package definition to make it build with the commit being bisected.
• Built glibc using the GCC that was just built.
• Ran tests inside a docker container (with the recently built glibc installed) to determine whether the bug was present.

At the end, I had a commit to point to:

commit 99b1daae18c095d6c94d32efb77442838e11cbfb
Author: Richard Biener <rguenther@suse.de>
Date:   Fri May 3 14:04:41 2024 +0200
    tree-optimization/114589 - remove profile based sink heuristics

Makes sense, right?! No? Well, it didn t for me either. Even after reading what was changed in the code and the upstream bug fixed by the commit, I was still clueless as to why this change fixed the problem (I say fixed because it may very well be an unintended consequence of the change, and some other problem might have been introduced).

Upstream takes over After obtaining the commit that possibly fixed the bug, while talking to Dann and explaining what I did, he suggested that I should file an upstream bug and check with them. Great idea, of course. I filed the following upstream bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=120653 It s a bit long, very dense and complex, but ultimately upstream was able to find the real problem and have a patch accepted in just two days. Nothing like knowing the code base. The initial bug became: https://sourceware.org/bugzilla/show_bug.cgi?id=33088 In the end, the problem was indeed in how the linker defines __ehdr_start, which, according to the code (from elf/dl-support.c):

if (_dl_phdr == NULL)
   
    /* Starting from binutils-2.23, the linker will define the
       magic symbol __ehdr_start to point to our own ELF header
       if it is visible in a segment that also includes the phdrs.
       So we can set up _dl_phdr and _dl_phnum even without any
       information from auxv.  */


    extern const ElfW(Ehdr) __ehdr_start attribute_hidden;
    assert (__ehdr_start.e_phentsize == sizeof *GL(dl_phdr));
    _dl_phdr = (const void *) &__ehdr_start + __ehdr_start.e_phoff;
    _dl_phnum = __ehdr_start.e_phnum;
   

But the following definition is the problematic one (from elf/rtld.c):

extern const ElfW(Ehdr) __ehdr_start attribute_hidden;

This symbol (along with its counterpart, __ehdr_end) was being run-time relocated when it shouldn t be. The fix that was pushed added optimization barriers to prevent the compiler from doing the relocations. I don t claim to fully understand what was done here, and Jakub s analysis is a thing to behold, but in the end I was able to confirm that the patch fixed the bug. And in the end, it was indeed a glibc bug.

Conclusion This was an awesome bug to investigate. It s one of those that deserve a blog post, even though some of the final details of the fix flew over my head. I d like to start blogging more about these sort of bugs, because I ve encountered my fair share of them throughout my career. And it was great being able to do some debugging with another person, exchange ideas, learn things together, and ultimately share that deep satisfaction when we find why a crash is happening. I have at least one more bug in my TODO list to write about (another one with glibc, but this time I was able to get to the end of it and come up with a patch). Stay tunned. P.S.: After having published the post I realized that I forgot to explain why the -z now and -fno-strict-aliasing flags were important. -z now is the flag that I determined to be the root cause of the breakage. If I compiled glibc with every hardening flag except -z now, everything worked. So initially I thought that the problem had to do with how ld.so was resolving symbols at runtime. As it turns out, this ended up being more a symptom than the real cause of the bug. As for -fno-strict-aliasing, a Gentoo developer who commented on the GCC bug above mentioned that this OpenSSF bug had a good point against using this flag for hardening. I still have to do a deep dive on what was discussed in the issue, but this is certainly something to take into consideration. There s this very good write-up about strict aliasing in general if you re interested in understanding it better.

• Did the AI find things that humans did not find (or didn't bother to mention)
• Did the AI output help the humans with the review (useful summary etc)
• Did the AI output help the humans with the code (useful suggestions etc)
• Was the AI output misleading?
• Was the AI output distracting?

This update introduces several changes across CI configuration, Ansible roles, plugins, and test playbooks. It expands CI test coverage to a new Ansible version, adjusts YAML key types in test variables, refines conditional logic in Ansible tasks, adds new default variables, and improves clarity and consistency in playbook task definitions and debug output.

• Valid complaint? Probably.
• Useful suggestion? So-So.
• Wasted time? No.

• Valid complaint? Yes.
• Useful suggestion? Nope.
• Wasted time? Yes.

• Valid complaint? Yes (the expression really could use some cleanup).
• Useful suggestion? Nope.
• Wasted time? Yes.

• Valid complaint? Technically, yes.
• Useful suggestion? Nope.
• Wasted time? Yes.

The repository module was updated to support additional parameters for repository synchronization and authentication. New options were added for ansible collections, ostree, Python packages, and yum repositories, including authentication tokens, filtering controls, and version retention settings. All changes were limited to module documentation and argument specification.

• Valid complaint? Yes.
• Useful suggestion? Nope. (But it's not possible in this case!)
• Wasted time? No.

 if module.foreman_params['content_type'] != 'ansible_collection':
     invalid_list = [key for key in ['ansible_collection_requirements'] if key in module.foreman_params]
     if invalid_list:
         module.fail_json(msg="( 0 ) can only be used with content_type 'ansible_collection'".format(",".join(invalid_list)))
+
+# Validate ansible_collection specific parameters
+if module.foreman_params['content_type'] != 'ansible_collection':
+    invalid_list = [key for key in ['ansible_collection_auth_token', 'ansible_collection_auth_url'] if key in module.foreman_params]
+    if invalid_list:
+        module.fail_json(msg="( 0 ) can only be used with content_type 'ansible_collection'".format(",".join(invalid_list)))
+
+# Validate ostree specific parameters
+if module.foreman_params['content_type'] != 'ostree':
+    invalid_list = [key for key in ['depth', 'exclude_refs', 'include_refs'] if key in module.foreman_params]
+    if invalid_list:
+        module.fail_json(msg="( 0 ) can only be used with content_type 'ostree'".format(",".join(invalid_list)))
+
+# Validate python package specific parameters
+if module.foreman_params['content_type'] != 'python':
+    invalid_list = [key for key in ['excludes', 'includes', 'package_types', 'keep_latest_packages'] if key in module.foreman_params]
+    if invalid_list:
+        module.fail_json(msg="( 0 ) can only be used with content_type 'python'".format(",".join(invalid_list)))
+
+# Validate yum specific parameter
+if module.foreman_params['content_type'] != 'yum' and 'upstream_authentication_token' in module.foreman_params:
+    module.fail_json(msg="upstream_authentication_token can only be used with content_type 'yum'")

• Valid complaint? Yes.
• Useful suggestion? Mostly (I only had to merge the Yum and Ansible branches with the existing code).
• Wasted time? Nope.

• Valid complaint? Yes.
• Useful suggestion? Yes.
• Wasted time? Nope.

• Valid complaint? Yes.
• Useful suggestion? Yes.
• Wasted time? Nope.

• Valid complaint? In the context of a test, no. Would that be a real command definition, yes.
• Useful suggestion? Yes.
• Wasted time? Nope.

• Valid complaint? Mostly.
• Useful suggestion? Meh.
• Wasted time? A bit.

• Valid complaint? Nah.
• Useful suggestion? Nope.
• Wasted time? Not much.

• Valid complaint? Yes.
• Useful suggestion? Nope.
• Wasted time? Nope.

A workaround was added to the _update_entity method in the ForemanAnsibleModule class to ensure that when updating a host, both content_view_id and lifecycle_environment_id are always included together in the update payload. This prevents partial updates that could cause inconsistencies.

• we're working with a Katello setup and the host we're updating has content, so CV and LCE will be present
• we're working with a Katello setup and the host has no content (yet), so CV and LCE will be "updated" and we're not running into the workaround
• we're working with a plain Foreman, then both parameters are not even accepted by Ansible

• Valid complaint? Nope.
• Useful suggestion? Nope.
• Wasted time? Yes, as I've actually tried to come up with a case where it can happen.

What comes before part b? Throughout the 2000s, some of my favorite memories were from LAN parties at my friends places. Dragging your setup somewhere, long nights playing games, goofing off, even building software all night to get something working being able to do something fiercely technical in the context of a uniquely social activity. It wasn t really much about the games or the projects it was an excuse to spend time together, just hanging out. A huge reason I learned so much in college was that campus was a non-stop LAN party we could freely stand up servers, talk between dorms on the LAN, and hit my dorm room computer from the lab. Things could go from individual to social in the matter of seconds. The Internet used to work this way my dorm had public IPs handed out by DHCP, and my workstation could serve traffic from anywhere on the internet. I haven t been back to campus in a few years, but I d be surprised if this were still the case. In December of 2021, three of us got together and connected our houses together in what we now call The Promised LAN. The idea is simple fill the hole we feel is gone from our lives. Build our own always-on 24/7 nonstop LAN party. Build a space that is intrinsically social, even though we re doing technical things. We can freely host insecure game servers or one-off side projects without worrying about what someone will do with it. Over the years, it s evolved very slowly we haven t pulled any all-nighters. Our mantra has become old growth , building each layer carefully. As of May 2025, the LAN is now 19 friends running around 25 network segments. Those 25 networks are connected to 3 backbone nodes, exchanging routes and IP traffic for the LAN. We refer to the set of backbone operators as The Bureau of LAN Management . Combined decades of operating critical infrastructure has driven The Bureau to make a set of well-understood, boring, predictable, interoperable and easily debuggable decisions to make this all happen. Nothing here is exotic or even technically interesting.

Applications of trusting trust The hardest part, however, is rejecting the idea that anything outside our own LAN is untrustworthy nearly irreversible damage inflicted on us by the Internet. We have solved this by not solving it. We strictly control membership the absolute hard minimum for joining the LAN requires 10 years of friendship with at least one member of the Bureau, with another 10 years of friendship planned. Members of the LAN can veto new members even if all other criteria is met. Even with those strict rules, there s no shortage of friends that meet the qualifications but we are not equipped to take that many folks on. It s hard to join -both socially and technically. Doing something malicious on the LAN requires a lot of highly technical effort upfront, and it would endanger a decade of friendship. We have relied on those human, social, interpersonal bonds to bring us all together. It s worked for the last 4 years, and it should continue working until we think of something better. We assume roommates, partners, kids, and visitors all have access to The Promised LAN. If they re let into our friends' network, there is a level of trust that works transitively for us I trust them to be on mine. This LAN is not for security , rather, the network border is a social one. Benign hacking in the original sense of misusing systems to do fun and interesting things is encouraged. Robust ACLs and firewalls on the LAN are, by definition, an interpersonal not technical failure. We all trust every other network operator to run their segment in a way that aligns with our collective values and norms. Over the last 4 years, we ve grown our own culture and fads around half of the people on the LAN have thermal receipt printers with open access, for printing out quips or jokes on each other s counters. It s incredible how much network transport and a trusting culture gets you there s a 3-node IRC network, exotic hardware to gawk at, radios galore, a NAS storage swap, LAN only email, and even a SIP phone network of redphones .

DIY We do not wish to, nor will we, rebuild the internet. We do not wish to, nor will we, scale this. We will never be friends with enough people, as hard as we may try. Participation hinges on us all having fun. As a result, membership will never be open, and we will never have enough connected LANs to deal with the technical and social problems that start to happen with scale. This is a feature, not a bug. This is a call for you to do the same. Build your own LAN. Connect it with friends homes. Remember what is missing from your life, and fill it in. Use software you know how to operate and get it running. Build slowly. Build your community. Do it with joy. Remember how we got here. Rebuild a community space that doesn t need to be mediated by faceless corporations and ad revenue. Build something sustainable that brings you joy. Rebuild something you use daily. Bring back what we re missing.

Introduction This is just a note-taking about how fixed the long standing font issue about Debian Graphical Installer for up-coming trixie ready.

• debian-installer: GUI font for Japanese was incorrectly rendered

Recently, this issue had been resolved by Cyril Brulebois. Thanks!

What is the problem? Because of Han unification, wrong font typefaces are rendered by default when you choose Japanese language using Graphical Debian installer.

"Wrong" glyph for Japanese

Most of typefaces seems correct, but there are wrong typefaces (Simplified Chinese) which is used for widget rendering. This issue will not be solved during using DroidSansFallback.ttf continuously for Japanese. Thus, it means that we need to switch font itself which contains Japanese typeface to fix this issue. If you wan to know about how Han Unification is harmful in this context, See

• Your Code Displays Japanese Wrong

What causes this problem? In short, fonts-android (DroidSansFallback.ttf) had been used for CJK, especially for Japanese. Since Debian 9 (stretch), fonts-android was adopted for CJK fonts by default. Thus this issue was not resolved in Debian 9, Debian 10, Debian 11 and Debian 12 release cycle!

What is the impact about this issue? For sadly, Japanese native speakers can recognize such a unexpectedly rendered "Wrong" glyph, so it is not hard to continue Debian installation process. Even if there is no problem with the installer's functionality, it gives a terrible user experience for newbie. For example, how can you trust an installer which contains full of typos? It is similar situation for Japanese users.

How Debian Graphical Installer was fixed? In short, newly fonts-motoya-l-cedar-udeb was bundled for Japanese, and changed to switch that font via gtk-set-font command. It was difficult that what is the best font to deal font file size and visibility. Typically Japanese font file occupies extra a few MB. Luckily, some space was back for Installer, it was not seen as a problem (I guess).

• Saving some space on installation images

As a bonus, we tried to investigate a possibility of font compression mechanism for Installer, but it was regarded as too complicated and not suitable for trixie release cycle.

Conclution

• The font issue was fixed in Debian Graphical Installer for Japanese
• As recently fixed, not officially shipped yet (NOTE Debian Installer Trixie RC1 does not contain this fix) Try daily build installer if you want.

This article was written with Ultimate Hacking Keyboard 60 v2 with Rizer 60 (New my gear!).

This post by Dirk Eddelbuettel originated on his Thinking inside the box blog. If you like this or other open-source work I do, you can now sponsor me at GitHub.

A long, long time ago I have a few pictures on this blog, mostly in earlier years, because even with small pictures, the git repository became 80MiB soon this is not much in absolute terms, but the actual Markdown/Haskell/CSS/HTML total size is tiny compared to the picture, PDFs and fonts. I realised I need a better solution, probably about ten years ago, and that I should investigate git-annex. Then time passed, and I heard about git-lfs, so I thought that s the way forward. Now, I recently got interested again into doing something about this repository, and started researching.

Detour: git-lfs I was sure that git-lfs, being supported by large providers, would be the modern solution. But to my surprise, git-lfs is very server centric, which in hindsight makes sense, but for a home setup, it s not very good. Maybe I misunderstood, but git-lfs is more a protocol/method for a forge to store files, rather than an end-user solution. But then you need to backup those files separately (together with the rest of the forge), or implement another way of safeguarding them. Further details such as the fact that it keeps two copies of the files (one in the actual checked-out tree, one in internal storage) means it s not a good solution. Well, for my blog yes, but not in general. Then posts on Reddit about horror stories people being locked out of github due to quota, as an example, or this Stack Overflow post about git-lfs constraining how one uses git, convinced me that s not what I want. To each their own, but not for me I might want to push this blog s repo to github, but I definitely wouldn t want in that case to pay for github storage for my blog images (which are copies, not originals). And yes, even in 2025, those quotas are real GitHub limits and I agree with GitHub, storage and large bandwidth can t be free.

Back to the future: git-annex So back to git-annex. I thought it s going to be a simple thing, but oh boy, was I wrong. It took me half a week of continuous (well, in free time) reading and discussions with LLMs to understand a bit how it works. I think, honestly, it s a bit too complex, which is why the workflows page lists seven (!) levels of workflow complexity, from fully-managed, to fully-manual. IMHO, respect to the author for the awesome tool, but if you need a web app to help you manage git, it hints that the tool is too complex. I made the mistake of running git annex sync once, to realise it actually starts pushing to my upstream repo and creating new branches and whatnot, so after enough reading, I settled on workflow 6/7, since I don t want another tool to manage my git history. Maybe I m an outlier here, but everything automatic is a bit too much for me. Once you do managed yourself how git-annex works (on the surface, at least), it is a pretty cool thing. It uses a git-annex git branch to store metainformation, and that is relatively clean. If you do run git annex sync, it creates some extra branches, which I don t like, but meh.

Trick question: what is a remote? One of the most confusing things about git-annex was understanding its remote concept. I thought a remote is a place where you replicate your data. But not, that s a special remote. A normal remote is a git remote, but which is expected to be git/ssh/with command line access. So if you have a git+ssh remote, git-annex will not only try to push it s above-mentioned branch, but also copy the files. If such a remote is on a forge that doesn t support git-annex, then it will complain and get confused. Of course, if you read the extensive docs, you just do git config remote.<name>.annex-ignore true, and it will understand that it should not sync to it. But, aside, from this case, git-annex expects that all checkouts and clones of the repository are both metadata and data. And if you do any annex commands in them, all other clones will know about them! This can be unexpected, and you find people complaining about it, but nowadays there s a solution:

git clone   dir && cd dir
git config annex.private true
git annex init "temp copy"

This is important. Any leaf git clone must be followed by that annex.private true config, especially on CI/CD machines. Honestly, I don t understand why by default clones should be official data stores, but it is what it is. I settled on not making any of my checkouts stable , but only the actual storage places. Except those are not git repositories, but just git-annex storage things. I.e., special remotes. Is it confusing enough yet ?

Special remotes The special remotes, as said, is what I expected to be the normal git annex remotes, i.e. places where the data is stored. But well, they exist, and while I m only using a couple simple ones, there is a large number of them. Among the interesting ones: git-lfs, a remote that allows also storing the git repository itself (git-remote-annex), although I m bit confused about this one, and most of the common storage providers via the rclone remote. Plus, all of the special remotes support encryption, so this is a really neat way to store your files across a large number of things, and handle replication, number of copies, from which copy to retrieve, etc. as you with.

And many of other features git-annex has tons of other features, so to some extent, the sky s the limit. Automatic selection of what to add git it vs plain git, encryption handling, number of copies, clusters, computed files, etc. etc. etc. I still think it s cool but too complex, though!

Uses Aside from my blog post, of course. I ve seen blog posts/comments about people using git-annex to track/store their photo collection, and I could see very well how the remote encrypted repos any of the services supported by rclone could be an N+2 copy or so. For me, tracking photos would be a bit too tedious, but it could maybe work after more research. A more practical thing would probably be replicating my local movie collection (all legal, to be clear) better than just run rsync from time to time and tracking the large files in it via git-annex. That s an exercise for another day, though, once I get more mileage with it - my blog pictures are copies, so I don t care much if they get lost, but movies are primary online copies, and I don t want to re-dump the discs. Anyway, for later.

Migrating to git-annex Migrating here means ending in a state where all large files are in git-annex, and the plain git repo is small. Just moving the files to git annex at the current head doesn t remove them from history, so your git repository is still large; it won t grow in the future, but remains with old size (and contains the large files in its history). In my mind, a nice migration would be: run a custom command, and all the history is migrated to git-annex, so I can go back in time and the still use git-annex. I na vely expected this would be easy and already available, only to find comments on the git-annex site with unsure git-filter-branch calls and some web discussions. This is the discussion on the git annex website, but it didn t make me confident it would do the right thing. But that discussion is now 8 years old. Surely in 2025, with git-filter-repo, it s easier? And, maybe I m missing something, but it is not. Not from the point of view of plain git, that s easy, but because interacting with git-annex, which stores its data in git itself, so doing this properly across successive steps of a repo (when replaying the commits) is, I think, not well defined behaviour. So I was stuck here for a few days, until I got an epiphany: As I m going to rewrite the repository, of course I m keeping a copy of it from before git-annex. If so, I don t need the history, back in time, to be correct in the sense of being able to retrieve the binary files too. It just needs to be correct from the point of view of the actual Markdown and Haskell files that represent the meat of the blog. This simplified the problem a lot. At first, I wanted to just skip these files, but this could also drop commits (git-filter-repo, by default, drops the commits if they re empty), and removing the files loses information - when they were added, what were the paths, etc. So instead I came up with a rather clever idea, if I might say so: since git-annex replaces files with symlinks already, just replace the files with symlinks in the whole history, except symlinks that are dangling (to represent the fact that files are missing). One could also use empty files, but empty files are more valid in a sense than dangling symlinks, hence why I settled on those. Doing this with git-filter-repo is easy, in newer versions, with the new --file-info-callback. Here is the simple code I used:

import os
import os.path
import pathlib

SKIP_EXTENSIONS= 'jpg', 'jpeg', 'png', 'pdf', 'woff', 'woff2' 
FILE_MODES =  b"100644", b"100755" 
SYMLINK_MODE = b"120000"

fas_string = filename.decode()
path = pathlib.PurePosixPath(fas_string)
ext = path.suffix.removeprefix('.')

if ext not in SKIP_EXTENSIONS:
  return (filename, mode, blob_id)

if mode not in FILE_MODES:
  return (filename, mode, blob_id)

print(f"Replacing ' filename ' (extension '. ext ') in  os.getcwd() ")

symlink_target = '/none/binary-file-removed-from-git-history'.encode()
new_blob_id = value.insert_file_with_contents(symlink_target)
return (filename, SYMLINK_MODE, new_blob_id)

This goes and replaces files with a symlink to nowhere, but the symlink should explain why it s dangling. Then later renames or moving the files around work naturally , as the rename/mv doesn t care about file contents. Then, when the filtering is done via:

git-filter-repo --file-info-callback <(cat ~/filter-big.py ) --force

It is easy to onboard to git annex:

• remove all dangling symlinks
• copy the (binary) files from the original repository
• since they re named the same, and in the same places, git sees a type change
• then simply run git annex add on those files

For me it was easy as all such files were in a few directories, so just copying those directories back, a few git-annex add commands, and done. Of course, then adding a few rsync remotes, git annex copy --to, and the repository was ready. Well, I also found a bug in my own Hakyll setup: on a fresh clone, when the large files are just dangling symlinks, the builder doesn t complain, just ignores the images. Will have to fix.

Other resources This is a blog that I read at the beginning, and I found it very useful as an intro: https://switowski.com/blog/git-annex/. It didn t help me understand how it works under the covers, but it is well written. The author does use the sync command though, which is too magic for me, but also agrees about its complexity

The proof is in the pudding And now, for the actual first image to be added that never lived in the old plain git repository. It s not full-res/full-size, it s cropped a bit on the bottom. Earlier in the year, I went to Paris for a very brief work trip, and I walked around a bit it was more beautiful than what I remembered from way way back. So a bit random selection of a picture, but here it is:

Un bateau sur la Seine

Enjoy!

Debian Contributions: 2025-05 Contributing to Debian is part of Freexian s mission. This article covers the latest achievements of Freexian and their collaborators. All of this is made possible by organizations subscribing to our Long Term Support contracts and consulting services.

Updated Austin, by Colin Watson and Helmut Grohne Austin is a frame stack sampling profiler for Python. It allows profiling Python applications without instrumenting them while losing some accuracy in the process, and is the only one of its kind presently packaged for Debian. Unfortunately, it hadn t been uploaded in a while and hence the last Python version it worked with was 3.8. We updated it to a current version and also dealt with a number of architecture-specific problems (such as unintended sign promotion, 64bit time_t fallout and strictness due to -Wformat-security ) in cooperation with upstream. With luck, it will migrate in time for trixie.

Preparing for DebConf 25, by Stefano Rivera and Santiago Ruano Rinc n DebConf 25 is quickly approaching, and the organization work doesn t stop. In May, Stefano continued supporting the different teams. Just to give a couple of examples, Stefano made changes in DebConf 25 website to make BoF and sprints submissions public, so interested people can already know if a BoF or sprint for a given subject is planned, allowing coordination with the proposer; or to enhance how statistics are made public to help the work of the local team. Santiago has participated in different tasks, including the logistics of the conference, like preparing more information about the public transportation that will be available. Santiago has also taken part in activities related to fundraising and reviewing more event proposals.

Miscellaneous contributions

• Lucas fixed security issues in Valkey in unstable.
• Lucas tried to help with the update of Redis to version 8 in unstable. The package hadn t been updated for a while due to licensing issues, but now upstream maintainers fixed them.
• Lucas uploaded around 20 ruby-* packages to unstable that weren t updated for some years to make them build reproducible. Thanks to reproducible builds folks to point out those issues. Also some unblock requests (and follow-ups) were needed to make them reach trixie in time for the release.
• Lucas is organizing a Debian Outreach session for DebConf 25, reaching out to all interns of Google Summer of Code and Outreachy programs from the last year. The session will be presented by in-person interns and also video recordings from the interns interested in participating but did not manage to attend the conference.
• Lucas continuously works on DebConf Content team tasks. Replying to speakers, sponsors, and communicating internally with the team.
• Carles improved po-debconf-manager: fixed bugs reported by Catalan translator, added possibility to import packages out of salsa, added using non-default project branches on salsa, polish to get ready for DebCamp.
• Carles tested new apt in trixie and reported bugs to apt , installation-report , libqt6widget6 .
• Carles used po-debconf-manager and imported remaining 80 packages, reviewed 20 translations, submitted (MR or bugs) 54 translations.
• Carles prepared some topics for translation BoF in DebConf (gathered feedback, first pass on topics).
• Helmut gave an introductory talk about the mechanics of Linux namespaces at MiniDebConf Hamburg.
• Helmut sent 25 patches for cross compilation failures.
• Helmut reviewed, refined and applied a patch from Jochen Sprickerhof to make the Multi-Arch hinter emit more hints for pure Python modules.
• Helmut sat down with Christoph Berg (not affiliated with Freexian) and extended unschroot to support directory-based chroots with overlayfs. This is a feature that was lost in transitioning from sbuild s schroot backend to its unshare backend. unschroot implements the schroot API just enough to be usable with sbuild and otherwise works a lot like the unshare backend. As a result, apt.postgresql.org now performs its builds contained in a user namespace.
• Helmut looked into a fair number of rebootstrap failures most of which related to musl or gcc-15 and imported patches or workarounds to make those builds proceed.
• Helmut updated dumat to use sqop fixing earlier PGP verification problems thanks to Justus Winter and Neal Walfield explaining a lot of sequoia at MiniDebConf Hamburg.
• Helmut got the previous zutils update for /usr-move wrong again and had to send another update.
• Helmut looked into why debvm s autopkgtests were flaky and with lots of help from Paul Gevers and Michael Tokarev tracked it down to a race condition in qemu. He updated debvm to trigger the problem less often and also fixed a wrong dependency using Luca Boccassi s patch.
• Santiago continued the switch to sbuild for Salsa CI (that was stopped for some months), and has been mainly testing linux, since it s a complex project that heavily customizes the pipeline. Santiago is preparing the changes for linux to submit a MR soon.
• In openssh, Colin tracked down some intermittent sshd crashes to a root cause, and issued bookworm and bullseye updates for CVE-2025-32728.
• Colin spent some time fixing up fail2ban, mainly reverting a patch that caused its tests to fail and would have banned legitimate users in some common cases.
• Colin backported upstream fixes for CVE-2025-48383 (django-select2) and CVE-2025-47287 (python-tornado) to unstable.
• Stefano supported video streaming and recording for 2 miniDebConfs in May: Macei and Hamburg. These had overlapping streams for one day, which is a first for us.
• Stefano packaged the new version of python-virtualenv that includes our patches for not including the wheel for wheel.
• Stefano got all involved parties to agree (in principle) to meet at DebConf for a mediated discussion on a dispute that was brought to the technical committee.
• Anupa coordinated the swag purchase for DebConf 25 with Juliana and Nattie.
• Anupa joined the publicity team meeting for discussing the upcoming events and BoF at DebConf 25.
• Anupa worked with the publicity team to publish Bits post to welcome GSoc 2025 Interns.

Debian LTS contributors In May, 22 contributors have been paid to work on Debian LTS, their reports are available:

• Abhijith PA did 8.0h (out of 0.0h assigned and 8.0h from previous period).
• Adrian Bunk did 26.0h (out of 26.0h assigned).
• Andreas Henriksson did 1.0h (out of 15.0h assigned and 3.0h from previous period), thus carrying over 17.0h to the next month.
• Andrej Shadura did 3.0h (out of 10.0h assigned), thus carrying over 7.0h to the next month.
• Bastien Roucari s did 20.0h (out of 20.0h assigned).
• Ben Hutchings did 8.0h (out of 20.0h assigned and 4.0h from previous period), thus carrying over 16.0h to the next month.
• Carlos Henrique Lima Melara did 12.0h (out of 11.0h assigned and 1.0h from previous period).
• Chris Lamb did 15.5h (out of 0.0h assigned and 15.5h from previous period).
• Daniel Leidert did 25.0h (out of 26.0h assigned), thus carrying over 1.0h to the next month.
• Emilio Pozuelo Monfort did 21.0h (out of 16.75h assigned and 11.0h from previous period), thus carrying over 6.75h to the next month.
• Guilhem Moulin did 11.5h (out of 8.5h assigned and 6.5h from previous period), thus carrying over 3.5h to the next month.
• Jochen Sprickerhof did 3.5h (out of 8.75h assigned and 17.5h from previous period), thus carrying over 22.75h to the next month.
• Lee Garrett did 26.0h (out of 12.75h assigned and 13.25h from previous period).
• Lucas Kanashiro did 20.0h (out of 18.0h assigned and 2.0h from previous period).
• Markus Koschany did 20.0h (out of 26.25h assigned), thus carrying over 6.25h to the next month.
• Roberto C. S nchez did 20.75h (out of 24.0h assigned), thus carrying over 3.25h to the next month.
• Santiago Ruano Rinc n did 15.0h (out of 12.5h assigned and 2.5h from previous period).
• Sean Whitton did 6.25h (out of 6.0h assigned and 2.0h from previous period), thus carrying over 1.75h to the next month.
• Sylvain Beucler did 26.25h (out of 26.25h assigned).
• Thorsten Alteholz did 15.0h (out of 15.0h assigned).
• Tobias Frost did 12.0h (out of 12.0h assigned).
• Utkarsh Gupta did 1.0h (out of 15.0h assigned), thus carrying over 14.0h to the next month.

Evolution of the situation In May, we released 54 DLAs. The LTS Team was particularly active in May, publishing a higher than normal number of advisories, as well as helping with a wide range of updates to packages in stable and unstable, plus some other interesting work. We are also pleased to welcome several updates from contributors outside the regular team.

• Notable security updates:
  • containerd, prepared by Andreas Henriksson, fixes a vulnerability that could cause containers launched as non-root users to be run as root
  • libapache2-mod-auth-openidc, prepared by Moritz Schlarb, fixes a vulnerability which could allow an attacker to crash an Apache web server with libapache2-mod-auth-openidc installed
  • request-tracker4, prepared by Andrew Ruthven, fixes multiple vulnerabilities which could result in information disclosure, cross-site scripting and use of weak encryption for S/MIME emails
  • postgresql-13, prepared by Bastien Roucari s, fixes an application crash vulnerability that could affect the server or applications using libpq
  • dropbear, prepared by Guilhem Moulin, fixes a vulnerability which could potentially result in execution of arbitrary shell commands
  • openjdk-17, openjdk-11, prepared by Thorsten Glaser, fixes several vulnerabilities, which include denial of service, information disclosure or bypass of sandbox restrictions
  • glibc, prepared by Sean Whitton, fixes a privilege escalation vulnerability
• Notable non-security updates:
  • wireless-regdb, prepared by Ben Hutchings, updates information reflecting changes to radio regulations in many countries

This month s contributions from outside the regular team include the libapache2-mod-auth-openidc update mentioned above, prepared by Moritz Schlarb (the maintainer of the package); the update of request-tracker4, prepared by Andrew Ruthven (the maintainer of the package); and the updates of openjdk-17 and openjdk-11, also noted above, prepared by Thorsten Glaser. Additionally, LTS Team members contributed stable updates of the following packages:

• rubygems and yelp/yelp-xsl, prepared by Lucas Kanashiro
• simplesamlphp, prepared by Tobias Frost
• libbson-xs-perl, prepared by Roberto C. S nchez
• fossil, prepared by Sylvain Beucler
• setuptools and mydumper, prepared by Lee Garrett
• redis and webpy, prepared by Adrian Bunk
• xrdp, prepared by Abhijith PA
• tcpdf, prepared by Santiago Ruano Rinc n
• kmail-account-wizard, prepared by Thorsten Alteholz

Other contributions were also made by LTS Team members to packages in unstable:

• proftpd-dfsg DEP-8 tests (autopkgtests) were provided to the maintainer, prepared by Lucas Kanashiro
• a regular upload of libsoup2.4, prepared by Sean Whitton
• a regular upload of setuptools, prepared by Lee Garrett

Freexian, the entity behind the management of the Debian LTS project, has been working for some time now on the development of an advanced CI platform for Debian-based distributions, called Debusine. Recently, Debusine has reached a level of feature implementation that makes it very usable. Some members of the LTS Team have been using Debusine informally, and during May LTS coordinator Santiago Ruano Rinc n has made a call for the team to help with testing of Debusine, and to help evaluate its suitability for the LTS Team to eventually begin using as the primary mechanism for uploading packages into Debian. Team members who have started using Debusine are providing valuable feedback to the Debusine development team, thus helping to improve the platform for all users. Actually, a number of updates, for both bullseye and bookworm, made during the month of May were handled using Debusine, e.g. rubygems s DLA-4163-1. By the way, if you are a Debian Developer, you can easily test Debusine following the instructions found at https://wiki.debian.org/DebusineDebianNet. DebConf, the annual Debian Conference, is coming up in July and, as is customary each year, the week preceding the conference will feature an event called DebCamp. The DebCamp week provides an opportunity for teams and other interested groups/individuals to meet together in person in the same venue as the conference itself, with the purpose of doing focused work, often called sprints . LTS coordinator Roberto C. S nchez has announced that the LTS Team is planning to hold a sprint primarily focused on the Debian security tracker and the associated tooling used by the LTS Team and the Debian Security Team.

Thanks to our sponsors Sponsors that joined recently are in bold.

• Platinum sponsors:
  • Toshiba Corporation (for 116 months)
  • Civil Infrastructure Platform (CIP) (for 84 months)
  • VyOS Inc (for 48 months)
• Gold sponsors:
  • Roche Diagnostics International AG (for 126 months)
  • Akamai - Linode (for 120 months)
  • Babiel GmbH (for 110 months)
  • Plat Home (for 109 months)
  • University of Oxford (for 66 months)
  • Deveryware (for 53 months)
  • EDF SA (for 38 months)
  • Dataport A R (for 13 months)
  • CERN (for 11 months)
• Silver sponsors:
  • Domeneshop AS (for 131 months)
  • Nantes M tropole (for 125 months)
  • Univention GmbH (for 117 months)
  • Universit Jean Monnet de St Etienne (for 117 months)
  • Ribbon Communications, Inc. (for 111 months)
  • Exonet B.V. (for 100 months)
  • Leibniz Rechenzentrum (for 95 months)
  • Minist re de l Europe et des Affaires trang res (for 78 months)
  • Cloudways by DigitalOcean (for 68 months)
  • Dinahosting SL (for 66 months)
  • Bauer Xcel Media Deutschland KG (for 60 months)
  • Platform.sh SAS (for 60 months)
  • Moxa Inc. (for 54 months)
  • sipgate GmbH (for 52 months)
  • OVH US LLC (for 50 months)
  • Tilburg University (for 50 months)
  • GSI Helmholtzzentrum f r Schwerionenforschung GmbH (for 41 months)
  • THINline s.r.o. (for 14 months)
  • Copenhagen Airports A/S (for 8 months)
• Bronze sponsors:
  • Evolix (for 131 months)
  • Seznam.cz, a.s. (for 131 months)
  • Intevation GmbH (for 128 months)
  • Linuxhotel GmbH (for 128 months)
  • Daevel SARL (for 127 months)
  • Bitfolk LTD (for 126 months)
  • Megaspace Internet Services GmbH (for 126 months)
  • Greenbone AG (for 125 months)
  • NUMLOG (for 125 months)
  • WinGo AG (for 124 months)
  • Entr ouvert (for 115 months)
  • Adfinis AG (for 113 months)
  • Tesorion (for 108 months)
  • Laboratoire LEGI - UMR 5519 / CNRS (for 107 months)
  • Bearstech (for 99 months)
  • LiHAS (for 99 months)
  • Catalyst IT Ltd (for 94 months)
  • Demarcq SAS (for 88 months)
  • Universit Grenoble Alpes (for 74 months)
  • TouchWeb SAS (for 66 months)
  • SPiN AG (for 63 months)
  • CoreFiling (for 59 months)
  • Institut des sciences cognitives Marc Jeannerod (for 54 months)
  • Observatoire des Sciences de l Univers de Grenoble (for 50 months)
  • Tem Innovations GmbH (for 45 months)
  • WordFinder.pro (for 44 months)
  • CNRS DT INSU R sif (for 43 months)
  • Soliton Systems K.K. (for 38 months)
  • Alter Way (for 36 months)
  • Institut Camille Jordan (for 26 months)
  • SOBIS Software GmbH (for 11 months)
  • Tuxera Inc.

• automat
• celery
• flufl.i18n
• flufl.lock
• frozenlist
• python-charset-normalizer
• python-evalidate (including pointing out an upstream release handling issue)
• python-pythonjsonlogger
• python-setproctitle
• python-telethon
• python-typing-inspection
• python-webargs
• pyzmq
• trove-classifiers (including a small upstream cleanup)
• uncertainties
• zope.testrunner

• python-django to 3:4.2.21-1 (issuing BSA-124)
• python-django-pgtrigger to 4.14.0-1

• celery (contributed upstream)
• python-setproctitle
• uncertainties (contributed upstream, after some discussion)

• django-select2: CVE-2025-48383
• python-tornado: CVE-2025-47287

• fail2ban (also reviewing and merging fix sshd 10.0 log identifier and remove runtime calls to distutils)
• karabo-bridge (contributed upstream)
• kegtron-ble
• python-click-option-group (NMU)
• python-holidays
• python-mastodon
• python-mechanize (contributed upstream)
• thermobeacon-ble

• karabo-bridge
• python-lazy-model

1. Security audit of Reproducible Builds tools published
2. When good pseudorandom numbers go bad
3. Academic articles
4. Distribution work
5. diffoscope and disorderfs
6. Website updates
7. Reproducibility testing framework
8. Upstream patches

Security audit of Reproducible Builds tools published The Open Technology Fund s (OTF) security partner Security Research Labs recently an conducted audit of some specific parts of tools developed by Reproducible Builds. This form of security audit, sometimes called a whitebox audit, is a form testing in which auditors have complete knowledge of the item being tested. They auditors assessed the various codebases for resilience against hacking, with key areas including differential report formats in diffoscope, common client web attacks, command injection, privilege management, hidden modifications in the build process and attack vectors that might enable denials of service. The audit focused on three core Reproducible Builds tools: diffoscope, a Python application that unpacks archives of files and directories and transforms their binary formats into human-readable form in order to compare them; strip-nondeterminism, a Perl program that improves reproducibility by stripping out non-deterministic information such as timestamps or other elements introduced during packaging; and reprotest, a Python application that builds source code multiple times in various environments in order to to test reproducibility. OTF s announcement contains more of an overview of the audit, and the full 24-page report is available in PDF form as well.

When good pseudorandom numbers go bad Danielle Navarro published an interesting and amusing article on their blog on When good pseudorandom numbers go bad. Danielle sets the stage as follows:

[Colleagues] approached me to talk about a reproducibility issue they d been having with some R code. They d been running simulations that rely on generating samples from a multivariate normal distribution, and despite doing the prudent thing and using set.seed() to control the state of the random number generator (RNG), the results were not computationally reproducible. The same code, executed on different machines, would produce different random numbers. The numbers weren t just a little bit different in the way that we ve all wearily learned to expect when you try to force computers to do mathematics. They were painfully, brutally, catastrophically, irreproducible different. Somewhere, somehow, something broke.

Thanks to David Wheeler for posting about this article on our mailing list

Academic articles There were two scholarly articles published this month that related to reproducibility: Daniel Hugenroth and Alastair R. Beresford of the University of Cambridge in the United Kingdom and Mario Lins and Ren Mayrhofer of Johannes Kepler University in Linz, Austria published an article titled Attestable builds: compiling verifiable binaries on untrusted systems using trusted execution environments. In their paper, they:

present attestable builds, a new paradigm to provide strong source-to-binary correspondence in software artifacts. We tackle the challenge of opaque build pipelines that disconnect the trust between source code, which can be understood and audited, and the final binary artifact, which is difficult to inspect. Our system uses modern trusted execution environments (TEEs) and sandboxed build containers to provide strong guarantees that a given artifact was correctly built from a specific source code snapshot. As such it complements existing approaches like reproducible builds which typically require time-intensive modifications to existing build configurations and dependencies, and require independent parties to continuously build and verify artifacts.

The authors compare attestable builds with reproducible builds by noting an attestable build requires only minimal changes to an existing project, and offers nearly instantaneous verification of the correspondence between a given binary and the source code and build pipeline used to construct it , and proceed by determining that t he overhead (42 seconds start-up latency and 14% increase in build duration) is small in comparison to the overall build time.
Timo Pohl, Pavel Nov k, Marc Ohm and Michael Meier have published a paper called Towards Reproducibility for Software Packages in Scripting Language Ecosystems. The authors note that past research into Reproducible Builds has focused primarily on compiled languages and their ecosystems, with a further emphasis on Linux distribution packages:

However, the popular scripting language ecosystems potentially face unique issues given the systematic difference in distributed artifacts. This Systemization of Knowledge (SoK) [paper] provides an overview of existing research, aiming to highlight future directions, as well as chances to transfer existing knowledge from compiled language ecosystems. To that end, we work out key aspects in current research, systematize identified challenges for software reproducibility, and map them between the ecosystems.

Ultimately, the three authors find that the literature is sparse , focusing on few individual problems and ecosystems, and therefore identify space for more critical research.

Distribution work In Debian this month:

• Ian Jackson filed a bug against the debian-policy package in order to delve into an issue affecting Debian s support for cross-architecture compilation, multiple-architecture systems, reproducible builds SOURCE_DATE_EPOCH environment variable and the ability to recompile already-uploaded packages to Debian with a new/updated toolchain (binNMUs). Ian identifies a specific case, specifically in the libopts25-dev package, involving a manual page that had interesting downstream effects, potentially affecting backup systems. The bug generated a large number of replies, some of which have references to similar or overlapping issues, such as this one from 2016/2017.
• Chris Hofstaedtler filed a bug against the metasnap.debian.net service to note that some packages are not available in metasnap API.
• 22 reviews of Debian packages were added, 24 were updated and 11 were removed this month, all adding to our knowledge about identified issues.

Hans-Christoph Steiner of the F-Droid catalogue of open source applications for the Android platform published a blog post on Making reproducible builds visible. Noting that Reproducible builds are essential in order to have trustworthy software , Hans also mentions that F-Droid has been delivering reproducible builds since 2015 . However:

There is now a Reproducibility Status link for each app on f-droid.org, listed on every app s page. Our verification server shows or based on its build results, where means our rebuilder reproduced the same APK file and means it did not. The IzzyOnDroid repository has developed a more elaborate system of badges which displays a for each rebuilder. Additionally, there is a sketch of a five-level graph to represent some aspects about which processes were run.

Hans compares the approach with projects such as Arch Linux and Debian that provide developer-facing tools to give feedback about reproducible builds, but do not display information about reproducible builds in the user-facing interfaces like the package management GUIs.
Arnout Engelen of the NixOS project has been working on reproducing the minimal installation ISO image. This month, Arnout has successfully reproduced the build of the minimal image for the 25.05 release without relying on the binary cache. Work on also reproducing the graphical installer image is ongoing.
In openSUSE news, Bernhard M. Wiedemann posted another monthly update for their work there.
Lastly in Fedora news, Jelle van der Waa opened issues tracking reproducible issues in Haskell documentation, Qt6 recording the host kernel and R packages recording the current date. The R packages can be made reproducible with packaging changes in Fedora.

diffoscope & disorderfs diffoscope is our in-depth and content-aware diff utility that can locate and diagnose reproducibility issues. This month, Chris Lamb made the following changes, including preparing and uploading versions 295, 296 and 297 to Debian:

• Don t rely on zipdetails --walk argument being available, and only add that argument on newer versions after we test for that. [ ]
• Review and merge support for NuGet packages from Omair Majid. [ ]
• Update copyright years. [ ]
• Merge support for an lzma comparator from Will Hollywood. [ ][ ]

Chris also merged an impressive changeset from Siva Mahadevan to make disorderfs more portable, especially on FreeBSD. disorderfs is our FUSE-based filesystem that deliberately introduces non-determinism into directory system calls in order to flush out reproducibility issues [ ]. This was then uploaded to Debian as version 0.6.0-1. Lastly, Vagrant Cascadian updated diffoscope in GNU Guix to version 296 [ ][ ] and 297 [ ][ ], and disorderfs to version 0.6.0 [ ][ ].

Website updates Once again, there were a number of improvements made to our website this month including:

• Chris Lamb:
  • Merged four or five suggestions from Guillem Jover for the GNU Autotools examples on the SOURCE_DATE_EPOCH example page [ ]
  • Incorporated a number of fixes for the JavaScript SOURCE_DATE_EPOCH snippet from Sebastian Davis, which did not handle non-integer values correctly. [ ]
• David A. Wheeler:
  • Fix an apostrophe in the README.md file. [ ]
• Hans-Christoph Steiner:
  • Add the F-Droid Verification Server to the Tools page. [ ]
  • Add the Creative Commons Attribution-ShareAlike 4.0 International as the website s root LICENSE file. [ ]
  • Updated the Recording the build environment page to add a section pertaining to how F-Droid handles this. [ ]
• Jochen Sprickerhof:
  • Add Chris Hofstaedtler to the Who is involved? page. [ ]
• Sebastian Davids:
  • Fix the CoffeeScript example on the SOURCE_DATE_EPOCH page. [ ]
  • Remove the JavaScript example that uses a fixed timezone on the SOURCE_DATE_EPOCH page. [ ]

Reproducibility testing framework The Reproducible Builds project operates a comprehensive testing framework running primarily at tests.reproducible-builds.org in order to check packages and other artifacts for reproducibility. However, Holger Levsen posted to our mailing list this month in order to bring a wider awareness to funding issues faced by the Oregon State University (OSU) Open Source Lab (OSL). As mentioned on OSL s public post, recent changes in university funding makes our current funding model no longer sustainable [and that] unless we secure $250,000 in committed funds, the OSL will shut down later this year . As Holger notes in his post to our mailing list, the Reproducible Builds project relies on hardware nodes hosted there. Nevertheless, Lance Albertson of OSL posted an update to the funding situation later in the month with broadly positive news.
Separate to this, there were various changes to the Jenkins setup this month, which is used as the backend driver of for both tests.reproducible-builds.org and reproduce.debian.net, including:

• Migrating the central jenkins.debian.net server AMD Opteron to Intel Haswell CPUs. Thanks to IONOS for hosting this server since 2012.
• After testing it for almost ten years, the i386 architecture has been dropped from tests.reproducible-builds.org. This is because that, with the upcoming release of Debian trixie, i386 is no longer supported as a regular architecture there will be no official kernel and no Debian installer for i386 systems. As a result, a large number of nodes hosted by Infomaniak have been retooled from i386 to amd64.
• Another node, ionos17-amd64.debian.net, which is used for verifying packages for all.reproduce.debian.net (hosted by IONOS) has had its memory increased from 40 to 64GB, and the number of cores doubled to 32 as well. In addition, two nodes generously hosted by OSUOSL have had their memory doubled to 16GB.
• Lastly, we have been granted access to more riscv64 architecture boards, so now we have seven such nodes, all with 16GB memory and 4 cores that are verifying packages for riscv64.reproduce.debian.net. Many thanks to PLCT Lab, ISCAS for providing those.

Outside of this, a number of smaller changes were also made by Holger Levsen:

• reproduce.debian.net-related:
  • Only use two workers for the ppc64el architecture due to RAM size. [ ]
  • Monitor nginx_request and nginx_status with the Munin monitoring system. [ ][ ]
  • Detect various variants of network and memory errors. [ ][ ][ ][ ]
  • Add a prominent link to reproducible-builds.org. [ ]
  • Add a rebuilderd-cache-cleanup.service and run it daily via timer. [ ][ ][ ][ ][ ]
  • Be more verbose what sources are being downloaded. [ ]
  • Correctly deal with packages with an epoch in their version [ ] and deal with binNMUs versions with an epoch as well [ ][ ].
  • Document how to reschedule all other errors on all archs. [ ]
  • Misc documentation improvements. [ ][ ][ ][ ]
  • Include the $HOSTNAME variable in the rebuilderd logfiles. [ ]
  • Install the equivs package on all worker nodes. [ ][ ]
• Jenkins nodes:
  • Permit the sudo tool to fix up permission issues. [ ][ ]
  • Document how to manage diskspace with OpenStack. [ ]
  • Ignore a number of spurious monitoring errors on riscv64, FreeBSD, etc.. [ ][ ][ ][ ]
  • Install ntpsec-ntpdate (instead of ntpdate) as the former is available on Debian trixie and bookworm. [ ][ ]
  • Use the same SSH ControlPath for all nodes. [ ]
  • Make sure the munin user uses the same SSH config as the jenkins user. [ ]
• tests.reproducible-builds.org-related:
  • Disable testing of the i386 architecture. [ ][ ][ ][ ][ ]
  • Document the current disk usage. [ ][ ]
  • Address some image placement now that we only test three architectures. [ ]
  • Keep track of build performance. [ ]
• Misc:
  • Fix a (harmless) typo in the multiarch_versionskew script. [ ]

In addition, Jochen Sprickerhof made a series of changes related to reproduce.debian.net:

• Add out of memory detection to the statistics page. [ ]
• Reverse the sorting order on the statistics page. [ ][ ][ ][ ]
• Improve the spacing between statistics groups. [ ]
• Update a (hard-coded) line number in error message detection pertaining to a debrebuild line number. [ ]
• Support Debian unstable in the rebuilder-debian.sh script. [ ] ]
• Rely on rebuildctl to sync only arch-specific packages. [ ][ ]

Upstream patches The Reproducible Builds project detects, dissects and attempts to fix as many currently-unreproducible packages as possible. This month, we wrote a large number of such patches, including:

• Bernhard M. Wiedemann:
  • cmake/musescore
  • netdiscover
  • autotrace, ck, cmake, crash, cvsps, gexif, gq, gtkam, ibus-table-others, krb5-appl, ktoblzcheck-data, leafnode, lib2geom, libexif-gtk, libyui, linkloop, meson, MozillaFirefox, ncurses, notify-sharp, pcsc-acr38, pcsc-asedriveiiie-serial, pcsc-asedriveiiie-usb, pcsc-asekey, pcsc-eco5000, pcsc-reflex60, perl-Crypt-RC, python-boto3, python-gevent, python-pytest-localserver, qt6-tools, seamonkey, seq24, smictrl, sobby, solfege, urfkill, uwsgi, wsmancli, xine-lib, xkeycaps, xquarto, yast-control-center, yast-ruby-bindings and yast
  • libmfx-gen, libmfx, liboqs
• Chris Hofstaedtler:
  • #1104578 filed against jabber-muc.
• Chris Lamb:
  • #1105171 filed against golang-github-lucas-clemente-quic-go.
• Jelle van der Waa:
  • gitlab-shell
• Jochen Sprickerhof:
  • #1104965 filed against bootp.
• Zhaofeng Li:
  • Add support for --mtime and --clamp-mtime to bsdtar.
• James Addison:
  • #1105119 for python3 requested enabling a LTO-adjacent option that should improve build reproducibility.
  • #1106274 upstream fix merged for freezegun for a timezone issue causing unit tests to fail during testing.
  • Opened a pull request for tutanota in an attempt to resolve a long-standing reproducibility issue.
• Zbigniew J drzejewski-Szmek:
  • 0xFFFF: Use SOURCE_DATE_EPOCH for date in manual pages.

Finally, if you are interested in contributing to the Reproducible Builds project, please visit our Contribute page on our website. However, you can get in touch with us via:

• IRC: #reproducible-builds on irc.oftc.net.
• Mastodon: @reproducible_builds@fosstodon.org
• Mailing list: rb-general@lists.reproducible-builds.org

One of my #rstats coding rituals is that every time I load a @vincentab.bsky.social package I go check for a new version because invariably it s been updated with 18 new major features

• install.packages() to obtain fabulous new statistical computing resources, ideally in an instant; and
• update.packages() to keep these fabulous resources current and free of (known) bugs.

This post by Dirk Eddelbuettel originated on his Thinking inside the box blog. If you like this or other open-source work I do, you can now sponsor me at GitHub.

This post is an unpublished review for Humanities and big data in Ibero-America Theory, methodology and practical applications

This post is an unpublished review for Beyond data poisoning in federated learning

This post is an unpublished review for Computational modelling of robot personhood and relationality

• Debian packages:
  • apt:
    • Bugs:
      • replied to #1078608: apt update silently leaves old index data
  • cis-tools:
    • Merge requests:
      • opened and merged !1: Initial Debian packaging
  • firmware-free:
    • Bugs:
      • replied to #890601: firmware-linux-free uses prebuilt blobs instead of building from source
    • Merge requests:
      • opened !10: Draft: Build CIS files and keyspan_pda firmware from source
  • firmware-nonfree:
    • Bugs:
      • closed #1106282: firmware-nonfree: Update stable-bpo to testing version
    • Uploads:
      • uploaded version 20250410-2~bpo12+1 to bookworm-backports
  • initramfs-tools:
    • Bugs:
      • closed #980021: initramfs-tools: Upgrading a LVM2 system with separate /usr to buster breaks booting
    • Merge requests:
      • merged !142: Handle simple-framebuffer drivers and framebuffer_coreboot built as modules
      • merged !167: hook-functions: Print error message on copy_file failure
      • merged !169: unmkinitramfs: Stop splitting into early and main subdirectories
      • merged !170: Fix inclusion of panel drivers
  • ktls-utils:
    • Uploads:
      • uploaded version 1.0.0-1 to unstable
  • linux:
    • Bugs:
      • replied to #763547: firmware-linux: please include ihex2fw tool into one of linux-* packages
      • replied to #1103397: Kernel Panic: copy_fpstate_to_sigframe crashes
      • replied to #1104080: linux: Please build with CONFIG_KERNEL_GZIP=y instead of CONFIG_KERNEL_XZ=y on sh4
    • Merge requests:
      • reviewed !1461: Fix some Lintian findings
      • merged !1466: Fix various lintian errors and warnings
      • merged !1471: [arm64] udeb: Add mtk-cmdq-mailbox to kernel-image
      • merged !1488: net/ipv6: Enable IPV6_RPL_LWTUNNEL
      • opened and merged !1489: Fix sh4 build and disable broken flavour
      • opened !1502: Add linux-misc-tools package for bootconfig, ihex2fw, thermometer, and tmon
      • merged !1506: [sparc64/smp] Enable NUMA
      • reviewed !1507: Drop yama: Disable by default and use upstream default to restrict ptrace
      • (LTS) opened !1524: Include target Debian release number in ABI name
    • Uploads:
      • (LTS) uploaded version 5.10.237-1 to bullseye-security
  • linux-6.1:
    • Uploads:
      • (LTS) uploaded version 6.1.137-1~deb11u1 to bullseye-security
  • linux-base:
    • Bugs:
      • closed #572712: use hardened sysctl net.* settings per default
      • closed #1076510: procps: vm.max_map_count = 65530 : Value too small for gaming
      • closed #1095744: kernel-img.conf.5: Some remarks and a patch with editorial changes for this man page
      • closed #1099472: linux-base: manpage refers to long-gone version numbers
      • closed #1100702: linux-update-symlinks.1: Some remarks and a patch with editorial changes for this man page
    • Merge requests:
      • opened !14: Add linux-run-hooks command for use by package maintainer scripts
      • opened !15: Clarify that version parameters are not package version strings
      • opened and merged !16: Manual page updates
      • opened and merged !17: linux-sysctl-defaults: Increase vm.max_map_count to 1048576
    • Uploads:
      • uploaded version 4.12 to unstable
  • procps:
    • Bugs:
      • replied to #1092550: procps: Addback/Provide example of sysctl.d/*.conf like the old sysctl.conf under /usr/share/doc/
  • reform-tools:
    • Bugs:
      • opened and replied to #1104639: Kernel hook installed in wrong directory / missing dependency
  • wireless-regdb:
    • Uploads:
      • uploaded version 2025.02.20-1~deb12u1 to bookworm
      • (LTS) uploaded version 2025.02.20-1~deb11u1 to bullseye-security
• Debian non-package bugs:
  • release.debian.org:
    • replied to #1104052: bookworm-pu: package initramfs-tools/0.142+deb12u2
    • opened #1106559: unblock: linux-base/4.12
    • opened #1106788: unblock: ktls-utils/1.0.0-1
  • wnpp:
    • replied to #1072579: ITP: cis-tools CIS file tools from pcmcia-cs
    • replied to #1105145: ITP: linux-board-support-package-rb3gen2 Firmware for RB3Gen2
    • replied to #1105839: ITP: ovpn-dkms OpenVPN data channel offload (ovpn)
• Mailing lists:
  • debian-devel:
    • posted and replied to Adding Pre-Depends from linux-image packages to linux-base
  • debian-events-eu:
    • replied to Debian BSP near Leuven, 26-27 April
  • debian-kernel:
    • posted Agenda items for kernel-team meeting on 2025-05-21
  • debian-lts:
    • replied to linux-image-6.1-* in Debian Bookworm
  • debian-lts-announce:
    • posted [SECURITY] [DLA 4171-1] wireless-regdb new upstream version
    • posted [SECURITY] [DLA 4178-1] linux security update
    • posted [SECURITY] [DLA 4193-1] linux-6.1 security update
  • debian-release:
    • posted Upstream kernel maintenance lifetime for bookworm and trixie
  • initramfs:
    • posted initramfs-tools 0.147 release
    • posted initramfs-tools 0.148 release

• Track volume control based on media role priority (MR)
• Release 0.47~rc1, 0.47.0

• Release 0.47~rc1, 0.47.0
• More signal unlink fixes (MR)
• Further polish the wlroots 0.19 switch and undraft (MR)
• Start to track wlroots 0.20 dev branch (MR)
• Remember output configuration and restore scale,mode,transform for single output configs (MR)

• Release 0.47~rc1, 0.47.0
• CI maintenance (MR, MR, MR)
• New alerts panel (MR)
• Handle p-o-s to stevia rename (MR)

• Smoke test completers (MR)
• Better use horizontal space in completion bar (MR)
• Add emojis to completion bar (MR)
• Drop separate emoji data (MR)
• Add some keyword completions (MR)
• Better handle lots of completions (MR)
• Release 0.47~rc1, 0.47.0
• Rename to Stevia (MR), (MR)
• Release 0.48~alpha1 to ease the rename for distros
• Some minor GTK4 preps (MR)

• Release 0.47.0

• Check packaging step (MR)

• Release 0.0.3

• Release 0.47.0

• Allow systemd to fail to help bootstrapping (MR)

• Skip noinsttest profiles (MR) - no need for these in nightly builds and helps nocheck triggering errors
• Work around phrog install failure until fixed upstream (MR)
• Switch from osk-stub to stevia (MR)

• Support automatic restart in more projects (MR)
• Fix glob for meson checks (MR)

• Expand media role MR with volume tracking (MR) - this is basically the same as the Wireplumber MR from below
• vibra-pattern: Don't overwrite magnitutde when changing global level (MR)
• Update fbcli manpage (MR)
• Drop custom script (MR)
• Add key- pressed,released events (MR)
• Release 0.8.2

• Release 0.8.3
• Use stronger button-pressed feedback for google,sargo (MR)

• Install tests so they can run through ginsttest-runner (MR)
• Release 0.3.0, 0.3.1
• Small timer cleanups (MR)
• Add mcc to iso country code conversion (MR)
• Fix manpage subject (MR)

• Fix crash on shutdown (MR)
• Drop meson version check (MR)
• Backport fixes for 48 (MR)

• phosh: Backport patches from 0.46 stable (MR)
• phosh: Upload 0.47~rc1, 0.47.0
• gnome-calls: Backport outging SIP call UI fix (MR)
• gmobile: Upload 0.3.0 with improved autopkg tests
• phoc: Upload 0.47~rc1, 0.47.0
• phosh-osk-stub: 0.47.0
• release-dom-compoenent: Drop tmp branch (MR)
• phosh-tour: Upload 0.47.0
• phosh-mobile-settings: Upload 0.47~rc1, 0.47.0
• xdg-desktop-portal-phosh: Upload 0.47.0
• wlroots: Upload 0.19.0
• stevia: Upload 0.48~alpha1
• meta-phosh: phosh-full: Depend on xwayland (MR)
• feedbackd-device-themes: Upload 0.8.3
• feedbackd: Upload 0.8.2
• feedbackd-device-themes: Backport key-press fix for google,sargo (MR)

• Simplify builds that need updated libqmi/libmbim (MR)
• CellBroadcast: Fix QMI channel reading corner cases (MR)
• Fix crash in CBM code (caused by unrelated bind-to refactor) (MR)
• Handle more data codings and expose CBM's language (MR)

• api-tool: Allow to set language of cell broadcast message (MR)

• Update docs to use our new MM subproject builds (MR)

• Allow emergency number information (MR)
• Allow Cell Broadcast information (MR)
• Add .dir-locales.el and make tests easier to parse (MR)

• Add channel handling (MR)
• Indicate on DBus whether Cell Broadcasts are supported (MR)
• Add ASAN check and fix fallout (MR)

• Add a support feature matrix (MR)
• New post: OSK completion and correction

• Simplify header use for projects that use -Wswitch-default (MR)

• Add lua script to track suitable volume control when role based policy linking is in use (MR)

• ModemManager: Add set-channel support (MR)

• Standardize audio stream roles (MR). Otherwise we'll have a hard time with e.g. WirePlumbers role based policy linking as apps might use all kinds of types.

• gmobile/pp: Ignore buttons on headsets (MR)
• p-o-s: Add Arabic translation (MR)
• p-o-s: pipe completer examples (MR)
• p-o-s: US Dvorak layout (MR)
• p-m-s: Use static library for building (MR)
• p-m-s: pmos tweaks UI parts (MR)
• p-m-s: Notification categories that light up the screen (MR)
• gmobile: Border radius for oneplus,enchilada (MR)
• m-b-p-i: Telia IOT provider (MR)
• phosh-site: Highlight selected footnote (MR)
• bluez: Don't start mpris proxy for root user (Patch)
• phoc: shortcuts-inhibit: Add support for the keyboard shortcuts inhibit protocol (MR)

• [1] https://blog.bofh.it/debian/id_471
• [2] https://etbe.coker.com.au/2010/08/04/clusters-dont-work/
• [3] https://freedombox.org/
• [4] https://wiki.debian.org/OpenStack

The slides are available as well. For questions or other feedback, please consider using the r2u GitHub repo issues section.

This post by Dirk Eddelbuettel originated on his Thinking inside the box blog. If you like this or other open-source work I do, you can now sponsor me at GitHub.