(For the grammar Nazis out there: no, that apostrophe is not
misplaced)
There are times when a connectionless protocol almost doesn't seem worth
the hassle.
Take, for instance, the troubles of a round-trip communication, using UDP,
where the initial request is sent to a secondary IP address on an
interface. Your code, on the server, might look like this:
s = UDPSocket.new
s.bind('', 12345)
loop data, remote = s.recvfrom(65535); s.send(data, 0, remote[3], remote[1]
This is a pretty simple Ruby fragment which just reflects your UDP packets
back at you. It really doesn't get much simpler than that. Connect to
this thing from somewhere else (using
nc -u remoteip 12345) and you
can reflect packets back and forth to your heart's content. Or so you'd
think...
When talking to a regular IP address, your packets probably look something
like this (when viewed using
tethereal):
192.168.0.1 -> 192.168.0.2 UDP Source port: 35716 Destination port: 12345
192.168.0.2 -> 192.168.0.1 UDP Source port: 12345 Destination port: 35716
Fantastic -- I send a packet, and get one back. In netcat, you see
whatever you typed printed back out again.
But, what if I add a secondary IP address to the server's interface
(
ifconfig eth0:1 192.168.0.5, for instance) and try sending
packets to
that IP address (with
nc -u 192.168.0.5
12345)? I get this insanity:
192.168.0.1 -> 192.168.0.5 UDP Source port: 35772 Destination port: 12345
192.168.0.2 -> 192.168.0.1 UDP Source port: 12345 Destination port: 35772
And of course, no self-respecting network stack is going to accept a packet
back from a totally different IP address, even if it
did manage to
get the ports right. Hence, the client never sees the return packets, and
thinks that the server is snubbing it.
What's happening here seems insane, but it's actually just a regular
artifact of a connecntionless protocol like UDP. You see, we've bound our
socket to the "any" address (the empty string in the call to
#bind
tells UDPSocket to bind to the "any" address -- no, I don't know why
either, it's not a particularly intuitive interface). When we get the
packet into our app via
#recvfrom, we get no information on what
address the packet was
actually sent to, only that the OS decided
that the packet was for us (yay for encapsulation). The only information
we get is where the packet was coming
from -- and due to the fact
that the kernel keeps no connection-related information around for the
socket (the kernel figures it'll hold us to our connectionless pledge),
when the time comes for us to send a packet back, we have to explicitly say
where we want that packet to go -- that's the
remote[3], remote[1]
arguments in the
#send call.
The brain-leakage starts when we work out where to say the packet is coming
from. When we send the packet, a source address needs to
calculated -- again, the kernel keeps no information on source or
destination because we're connectionless. Because our socket is bound to
the "any" interface, the OS thinks it has carte blanche to set whatever
source address it likes. In Linux, the behaviour appears to be to pick the
IP address set on the primary alias for the interface that will be used to
send the packet out on. So for the
common case (one IP address
per physical interface) everything is fine. But those corner cases,
gee, they're awfully sharp and pointy...
The solution, of course, is to send the packet out through a socket that is
bound to the particular address you want to use as the source address --
then the kernel knows what source address you want, and there's no
confusion. Seems pretty trivial, right? Surely every sensible network
application does that already, right? So
obviously Ruby's
UDPSocket implementation just sucks. That's what I thought, and I
don't blame you if you think so too. But before you raise pitchforks and
storm the gem-covered castle, try repeating our little experiment with some
other widely-used UDP-based applications, such as net-snmpd or your ntp
server. (The NTP server is a little different, in that to trigger the
problem you need to start it and
then setup the interface alias,
for reasons I'll explain later). Both net-snmpd and ntpd exhibit the same
behaviour as our trivial UDP echo service -- at least, the versions present
in Ubuntu Breezy do, although I can't imagine everyone's suddenly cottoned
onto this problem in the last 12 months or so and come out with a rash of
fixes.
So, basically, everyone seems to be suffering from the same malady. For
values of "everyone" that equal "some UDP servers". There's some services
that don't seem to have such troubles with alias interfaces -- the Bind DNS
server comes immediately to mind, and ntpd works fine if you start the NTP
server after you setup the interfaces. Why the difference? These services
are clever and bind to each IP address on the system separately, like so:
$ netstat -lun grep :53
udp 0 0 192.168.0.1:53 0.0.0.0:*
udp 0 0 192.168.0.5:53 0.0.0.0:*
udp 0 0 127.0.0.1:53 0.0.0.0:*
This is very cool, and solves the problem,
except that if you add
another interface
after you start Bind, it doesn't pick up the new
address, and you're boned until you restart the daemon. It also increases
code complexity a bit, since you need add a
select into your
request handling loop (instead of just blocking on the
#recvfrom
call, like I've been doing thus far). Whilst I'm never happy about
unnecessary complexity, I'll deal with it where I have to, but the real
killer for this application is the "you can't change your interfaces after
starting the daemon" rule -- my particular need is to make requests to a
virtual service IP address, and restarting my service after each IP address
change is going to suck
hard.
I mentioned ntpd earlier because it has some extra trickery at work. It's
list of bound interfaces looks like this:
udp 0 0 10.6.66.6:123 0.0.0.0:*
udp 0 0 192.168.250.6:123 0.0.0.0:*
udp 0 0 172.14.16.6:123 0.0.0.0:*
udp 0 0 172.31.62.1:123 0.0.0.0:*
udp 0 0 192.168.37.179:123 0.0.0.0:*
udp 0 0 10.64.64.64:123 0.0.0.0:*
udp 0 0 127.0.0.1:123 0.0.0.0:*
udp 0 0 0.0.0.0:123 0.0.0.0:*
It listens to every IP address explicitly
plus the "any"
interface. I'm not quite sure why, either -- just listening to the
specific addresses works for Bind, and if you add an interface alias after
starting ntpd, it exhibits exactly the same problem as the trivial UDP echo
service, so I don't think that listening on "any" is really gaining it
anything. Listening on "any" does make ntpd behave differently to Bind:
with Bind, if you send packets to an interface that wasn't available when
Bind was started, it just completely ignores you (because it lacks a socket
listening for packets to that address), while with ntpd the packets hit the
"any" socket and suffer from the wrong-source-address bug.
At the moment, my best chance of a solution appears to be to follow Bind
and ntpd's lead and hook onto every address, but with the extra twist
inspired by ntpd -- listen on the "any" address as well as all of the
specific addresses. If I use any packets that arrive on the "any" socket
as a trigger to rescan the available addresses (to add any new addresses
that have been created since the last scan), that should solve all my
problems.
Now I only need to make it work (and deal with the insanities that will no
doubt result). Wish me luck. The screams of pain and frustration you hear
(no matter where you are in the world) are probably mine.
Still behind, although less so than previously. Right now I’m in a happy daze after an amazingly wonderful romantic meal last night - and a fair amount of wine.
I like to go eating out at posh restaurants once a month or so. That way it is regular, but still novel enough to be exciting.
I guess I’m just a sucker for fancy food and people calling me Sir. (And only rarely adding “… you’re making a scene.”)