Search Results: "ag"

20 November 2006

Andreas Barth: Bugs to sell

There are a couple of bugs around where it would be a shame to remove the package (or where it is next to impossible), which are hard to fix for outsiders but should be way easier for people inside: There are a couple of more such bugs available, please feel free to visit our RC bugs list yourself.

Andreas Barth: Test KPilot

KPilot has a long-standing RC bug report about problems with syncing events and addressbook. There are now some test packages available at http://mirror.pusling.com/kdepim/kdepim_4:3.5.5.dfsg.1-2~sune1/ that should work, so please give it a try. (Writing about this because pusling doesn't blog.)

Eric Dorland: Iceweasel released from its cage

Iceweasel has hit incoming after spending only 90 minutes in the NEW queue (I think one of the ftp-masters must have a crush on me). Please test, test, test, especially upgrades from sarge. There are still a few branding issues to sort out, but I'll try to get them fixed over the next couple of days. Should we go with one of these icons? I particularly like the weasel humping the globe.

Biella Coleman: Modeling Politics on the Model of Free Software

My friend Jonah has written a provocative post that asks how the example of free software can be applied to the environmental politics as to create a free energy movement. His suggestion is a good one and it centers on the clear and accessible provision of information of labeling so as to create the conditions for meaningful choice and action. There is a line of critique launched against free software and the free culture movement accusing it of being myopic, privileged and limited. It is composed of a lot of well educated, white (many boys), honing in on liberating a set of artifacts software, music, movies etc, that are seen not to have all that much consequence in the world, compared to other more pressing matters, like famine, genocide, global warming, disease etc. I think this is somewhat of a negative critique that actually misses the point about why so many folks are attracted to the free culture movement in the first place and why it should be considered in a more positive light as a model for other forms of politics not because of its content but because of its form (and this is what Jonah basically says). In a world in which the mere thought about how to change the world is utterly paralyzing, seemingly futile, and just completely depressing, open source and free culture, by providing a set of tools along with a political message, has broken through the armour of apathy many of us are strangled by. It provided an opening to practically engage in politics, and thus allow many to taste the fruit of political action. And it is the taste, which keep people coming back to try to change the conditions of life. So the lesson to draw from free software is less whether its politics are radical or important enought, but that it provided an avenue and framework for alternative action. And it is this abililty to build the capacity for empowerment, which is one of its greatest virtues.

Enrico Zini: new-web-editor

New web-based tag editor The new web-based tag editor and the Go tagging! page went live. The new editor has two very interesting features: Suppose you'd have to tag gimp. The suggested tags view will probably suggest you a few useful tags based on its description, like interface::x11, x11::application, role::program. Then you'd choose "Tag search" and type "image editor" to get a list of tags that could be added to image editors. It'll give you tags like use::editing, works-with::image:raster, hardware::camera and so on. You can repeat with other keywords, like "gtk interface" and "scheme macros". This will already lead you, without thinking too much, to some useful categorisation. Ad that point you go back to "all tags" to pick up the rest, like appropriate tags for "uitoolkit: Interface Toolkit" and "implemented-in: Implemented in". Then save. It uses a cookie to mark your contributions, so that later on I can correlate together all the edits made by the same person and approve them in a single bunch. This makes it easy for me to spot and approve the work of those contributors that do a lot of work. It also opens the possibility of implementing a way of "signing" contributions so that, if you are a long-time contributor or if you are listed as the adopter of a tag, your edits could just skip manual review and go straight to the Packages file.

Enrico Zini: iterating-org

Contributions from iterating.com ITeRating has contacted me looking for ways of exchanging data with Debtags. There have been various outcomes of this:

Enrico Zini: website-redesign

Debtags home page redesigned The Debtags home page has been redesigned as a quick index to all the Debtags resources. Credits go to Zack for mailing me about updating the website: "From what I see on the list, it's one of the most active projects in Debian, it's a shame this is not reflected in its website". Indeed there have been lots of recent, very cool additions to the Debtags website: On top of that, the news section can now be generated from the RSS feeds of the contributors. I could now use some help with the CSS: I wish the website looked still plain and simple, but nice.

Ben Armstrong: Towards a Debian Jr. Live CD

Debian Jr. development revived Recently there has been some lively discussion on the Debian Jr. list about how to arrange an account for a child of 1 to 3 years of age. Suggestions included using set-top box software like Freevo, tailoring DEs with panels and large buttons, using simpler WMs like fvwm, or using an “activity centre” app like Gcompris. Now, I respect those parents who hold that a child this young should interact more with the “real world”. While I wouldn’t go so far as to outright prohibit my young ones from computer use, I can see the wisdom in keeping it to a minimum. But, for better or worse, our family is one of several who have some experience helping our youngest members use our Debian systems. We would like to share what we’ve learned through the Debian Jr. project. Getting started with live.debian.net To that end, last week I was inspired to follow the Debian Live ISO Howto to produce my first rough draft of a Debian Jr. live CD built from scratch on Etch. For the final product, we’ll want to use a local partial Debian archive mirror, as it not only optimizes fetching packages for several build iterations, but also can be kept stable, which is important as we near release. But for this draft, I ran into trouble building the complete package list to populate the partial mirror, as cdebootstrap, which make-live uses, has no handy --print-debs switch like debootstrap does. So for now, I rely on approx to cache packages for optimization only. A straightforward process to create a working live CD The rest of the process was straightforward: using live-package, I created a package list1 containing Gnome and the Debian Jr. metapackages, I configured /etc/make-live.conf to point at my proxy, and then I ran the make-live script on the package list. The end result was ./debian-live/binary.iso, which successfully booted under qemu. At this stage, there is not much to show. To be truly useful, the live CD needs to be set up so that children and their guides can immediately find and use the material intended for them. We will need not only one live CD user, but four, varying in age range and role. (More about this in a future article.) However, it is an encouraging start, and shows that we may be able to produce something usable by the time Etch releases.

1 For this exercise, I simply combined /usr/share/make-live/lists/gnome with the junior-* metapackages in Etch, and added mozilla-firefox-gnome-support to satisfy Gnome’s web browser dependency and cut down on redundancy, resulting in the following list.

junior-art
junior-doc
junior-games-card
junior-games-gl
junior-games-net
junior-games-sim
junior-games-text
junior-gnome
junior-internet
junior-kde
junior-math
junior-programming
junior-puzzle
junior-sound
junior-system
junior-toys
junior-typing
junior-writing
mozilla-firefox-gnome-support
eject sudo
console-common locales
gdm gdm-themes gnome-desktop-environment gnome-cups-manager gnome-screensaver
gnome-themes-extras
rhythmbox synaptic
x-window-system-core

Julien Danjou: Freevo packaging on its way

So this week-end Cyril Lacoux began to work on packaging freevo, which never got into Debian for a reason I still ignore. All I found is a 4 year old ITP from Matt Zimmerman who closed id some weeks later because he decided to give up and use MythTV instead. ;-) There's now a project on Alioth and we will probably get a working package soon, since we began to commit this morning.

Mario Iseli: ipw3945 & wpa_supplicant

This weekend my boss installed Debian Etch on his notebook and was very happy, he gave it to me because he couldn’t get ipw3945 run. Ok, it was really not as simple as I thought because I had to pick up some packages from unstable, but finally everything worked fine. Thanks to all the people who worked on this! Hmm, then I had a second idea of what I could try, we have a very proprietary network with Cisco Accesspoints which authenticate against an ActiveDirectory. Ok, after some miuntes (with an almost empty configuration) my wpa_supplicant daemon worked, so I tried out wpa_gui and kwlan to configure it. Configured… But it didn’t work and I didn’t get any useful messages about what’s going wrong. :-( Has anyone experience with this wpa_supplicant in a proprietary Cisco network using LEAP? I would be really happy about configuration files, because on the internet I can’t find useful ones.

Joey Hess: OpenID

I took some time today to learn about OpenID. Is it just me or are these newfangled web protocols both much harder to learn and much more poorly specified than traditional internet protocols? Alternately, perhaps I'm getting too old. :-) Anyway, it's seems to be Not Evil, and I look foward to being able to log into wikis and other sites without having to register separately on each one. Although I note that it punts the spam and abuse problem to some as-yet unimplemented policy layer. After all, there's no mapping between an OpenID and an actual person, just between an OpenID and a web page somewhere. Although there is the potential for someone to do something interesting with an OpenID server that only gives out OpenIDs to people with verified gpg keys. As my own little gesture toward spreading OpenID, I've added an openid plugin to ikiwiki. There's a $5000 bounty for implementing OpenID support in free software projects, but I don't think I can collect on it, since it's limited to projects that have tens of thousands of users, and with 30 registered ikiwiki users, my userbase is a few magnitudes too small. Oh well.. FWIW, my personal OpenID is http://joey.kitenet.net/.
Update after some more hacking: Even nicer, ikiwiki can now be set up to use only OpenID for authentication, and not mess with passwords at all. I also added support for the MyOpenID.com affiliate program, which lets users jump from the wiki to creating an OpenID, and back smoothly. My personal wiki is now configured like this.

19 November 2006

Jose Carlos Garcia Sogo: Cities with no traffic signals

According to this article, also referred on Slashdot, an European Union project has been developed aimed to check if streets free of any traffic signal or other rules are viable. Seven cities and regions are involved, no one of them in Spain. And I hope things to stay as now. Perhaps this can work in those civilized cultures in which people try to respect others rights. But I am 100% comfident that this won't work in Spain. If people does not respect signal even if they are there and can be fined for not following them, I don't want to imagine what will people make if there are no signals and no rules. The most used motto will be: "And who the ***** are you to tell me that I can not do this?". yay!

Aurelien Jarno: NEW queue almost empty

The NEW queue is almost empty with 7 packages only. Thanks a lot Joerg.

Jos Parrella: Elections in Venezuela

In two weeks (Dec 3rd) there will be presidential elections in Venezuela. This will be the third time where Hugo Chavez, the current President, will be participating in the elections. The first time, in 1998, he won by 62%, then dropped to 59% in 2000 and currently some polls are giving him between 50 and 60 percent of vote intention. Since 1998, we’ve got a very active electoral movement and controversial situations which have raised very diverse opinions about our electoral system. If I recall correctly, in 1998 people voted using optic forms. In that moment, spanish Indra was the company in charge for the machines and most of the technology used in the elections. That was the time where the Supreme Electoral Council depended on the Executive power, i.e., the President. In 1999, Chavez proposed to rewrite the Constitution, and the National Electoral Council became an independent power. This Constitution was approved in two referenda in 1999, where touchscreen machines were used. In 2000, after the new Constitution was approved, new presidential elections were made. The same touchscreen machines were used and we made a transition between Indra and a multinational holding named Smartmatic. In 2004, after two millions and a half of signatures were gathered to recall Chavez presidency, the revocatory referendum was made, using the Smartmatic machines. Almost six million people voted to maintain Chavez in power. Of course, after eight years of the same party in the power, as well as other problems (namely a national strike and a Coup d’Etat in 2002), several ideas arised regarding the legitimacy of the election process.
Today, the National Electoral Council released a flyer in the press, where they try to issue these topics. I must recognize that, being a newbie voter, I was unaware of several of the things they published today. For example, 8 of every 10 venezuelans over 18 are signed for voting in the elections. That’s one of the higher percentages of public awareness about elections in Latin America, higher than, for example, Colombia. That means 16 million people are able to vote, and we’re used to get around 60 percent of participation. We do vote with touchscreen machines, and the results are completely computerized. The military guards all the equipment, and provides security to the randomly elected civilian which work as temporary personnel. Members of every involved party are present in all the election centers, as well as national and international observers. After you’re checked to vote, you have to give your fingerprint in a special biometric device. This is transmitted live, were possible, avoiding two people voting in the same day. After you vote, your finger is marked with silver nitrate, which goes away after two days or so. Of course, you’re only allowed to vote if you don’t have the mark in your fingers. The touchscreen machines prints a paper which you put into the traditional box. After the voting has concluded, more than half of the boxes will be opened and checked against the information in the machine. The boxes subject to this check are randomly selected, as well. A brief thought about the software used in the machines. In 2004 or so, we (the Free Software Community in Venezuela) struggled and made pressure to the National Electoral Council to reveal the code and publish it wide open. This has been achieved until some point, since every interested person or organization is allowed to take a peek at the code. Dozens of organizations have already done so and are impressed by the features that are now present in the code. Before the first vote is registered, the machine prints a zero-vote confirmation, and then subsequently randomizes the order of the votes registered in memory. Only after all the election centers are closed, the machines start transmitting information. This year, three hours past the closing time we’ll have the results. The final and most important, from my point of view, argument held to support our election system is the random queue organization at the election centres. The registry is sorted by ID number, the votes are randomly stored in the memory and the biometric device is used in a per-arrival basis. Therefore, since nobody takes the same time to vote, the queues will be unarranged therefore making it quite difficult to determine a possible vote sequence. This has been certified lately by the European Union, the Organization of American States and other organizations. Whoever wins this election, I’m quite confident about our election system. I just hope that other institutions in our Country start using reliable systems (for example, the national ID office) in order to give at least the feeling of being in a rightful State.

Jeff Bailey: Google for your Domain

I've been playing with Google for your Domain over the past couple of weeks for Angie and my's email. A few observations so far:

1) Still a bit worried that Google now has a pile of my data. I don't know that there's a way to resolve this. I'm wondering if there's a way of doing GPG overlays onto gmail? For the most part I don't really care, but it would be nice to preserve the option of doing a local decryption.

2) It's nice to use my email address for my Jabber account finally. No more having to remember to check the gmail account from time to time to see if someone decided sending an email there would be a good idea. I should probably do the same with my hotmail account.

3) Google talk and Orkut don't play along with GfyD.

4) Google's incremental improvements are cool. In the past week they added customised start pages, which means that I can see my mail and calendar from a start page. The start page isn't as fully featured as the original start page (historical searches, various customer applets, etc. don't work), but looks alot like it did awhile ago.

5) gmail doesn't have a way of filtering on mailing lists. This annoyed me at first, but now is more of a reminder that I should unsubscribe from lists that I don't actually read anyway. The volume on the rest is low enough that I can continue to filter by hand.

Update: It seems that gmail *can* filter on mailing lists, it's just not documented. I've just setup a filter for listid:bug-gnulist.gnu.org and it seems to work. Use it in the "Has the words" section of the filter. Bug #83778177 filed with gmail for an update to http://mail.google.com/support/bin/answer.py?answer=7190

Piotr Roszatycki: YADA kills kitten ;-)

There was very funny thread about CDBS and kitten. I think any other solution is better than plain Makefile. Long time ago I adopted the YADA. It's wonderful tool for anybody who hates Makefiles. Yes, the project is still alive. Unfortunately I don't have too much time for promoting this project. Just one month ago some developer did NMU for my package (see Bug#391753). He wrote that YADA is quite unfriendly for NMUers. I really wonder, how it could be unfriendly as far as plain Makefile don't support even separate patch files... I think it would be much better if Debian had only one tool for packaging. The RPM's SPEC file as single source for package is more friendly for maintainer than thousands of separate debhelper's files. So the YADA came. But... I understand it is just an option. It is my choose how to package my packages. My own right to decide. I can live with Debian and CDBS, YADA or other packaging helpers.

Holger Levsen: stuff I did today

Prepared an upload for the new upstream version of tuxmath (two small bugfixes only), who thankfully got sponsored again and immediatly by by Kari Pahula - thanks again! A new upstream maintainer for tuxtype has also been found, btw & yay!

Finished setting up failive.debian.net, which in future will automatically build two fai-cds (currently only one), for fully automatatic installation of the booted system. To better reflect that those are not the usual live-cds, the vhost will soon be renamed to faicd.debian.net...

I also want to mention edulive.debian.net here, though I have done nothing about it today. This should become a replacement for the current handmade live-cd, but currently its stalled by ENOTIME and these two RC bugs.

Speaking of debian-edu, I spent some parts of this afternoon to create this statuspage for the skolelinux repository which got me more familar with dak and which will hopefully help us keeping the archive in a good state :-)

Testing d-i RC1 on powerpc newworld was boring: d-i worked flawlessly and the g-i mini.iso didn't boot. Will reburn and retry, but I don't have great hopes on that one. The mini.iso from beginning of November worked nicely though, so it's a minor issue.

Baruch Even: KVM in Debian

KVM is a Kernel-based Virtual Machine for Linux, it has a kernel module that enables a modified Qemu to use the Intel VT extension for full virtualisation, with the benefit of making the virtualisation very fast. In the future it will also support the SVM extension of AMD. It will be available in Debian once the ftp-masters clear the backlog, and is currently available in a temporary location. The manpage is missing but the instructions to get it to work are: At this stage you have KVM ready for usage, simply use the kvm program as if it was the Qemu program, to boot a Debian Live CD use: kvm -cdrom live.iso -boot d In the future the KVM patches will be merged into both the kernel and Qemu and these packages will be gone, but for now, that's the easiest way to use KVM. Update: KVM entered the archive, instructions above were updated.

Andreas Metzler: cheapskate HD upgrade

As the hard-disk of my PC exhibited its first hard error after months of strange noises I was forced to replace it. This machine dual-boots WinXP (on NTFS) and Debian, Windows' boot manager invokes grub and I absolutely did not want to re-install either Windows or Debian or try to figure how to resurrect a broken WinXP bootmanager. So I used the the dd-method again:
  1. Plugin new disk as hdc
  2. dd_rescue -b 512k -A /dev/hda /dev/hdc (I had to use -b 1 for copying the almost broken sectors.)
  3. Either re-partion or simply add more partitions at the end. (The new disk is always bigger.) Don't touch the first partition, which is NTFS and take care that the partion containing /boot gets the same partition number/position. - This way grub will grub will continue to work. Use cp -ax to acually copy the data to the new partitions. (cp is dog slow for copying directories containing many files, like ~/mail or ~/.ccache. - Two tar instances talking to each other over a pipe would probably be a lot faster but I cannot remember the 42 options needed to replicate cp -ax behavior.)
  4. Power off, switch disks, power on.
  5. Verify that your data is still there and clean the old disk, using shred(1) and openssl rand -rand /dev/urandom -out /dev/hdc1 somereallybignumber.
The process would be smoother if I knew of a sane way of copying NTFS (preserving ACLs) and could be bothered to actually remember how I setup grub in the first place. ;-)

Erich Schubert: Video transcoding

My camera has a video function. Nothing special, but it works okay. Actually the image quality maybe is even better than a typical PAL or NTSC camera. There are other drawbacks - tiny microphone, and I can't zoom while recording or handle light changes. So it can't replace a real camera, but it's okay for some limited use cases. Last weekend there was a Balboa workshop in Munich, with excellent teachers. At the end of the days we recorded the teachers repeating the moves they tought us during the day. A perfect situation to use my camera: good lighting, no lighting changes, no zoom changing needed. These videos are quite big, due to the limited compression capabilities of the camera. (the video codec they used is MJPG, i.e. the camera just saves 30 jpg images per second). So I decided to recompress them. I tried transcode first, but it messed up the audio (which played back at double speed). Mencoder worked like a charm. Size savings of a factor of 8-12 are easily possible (well, depending on your camera, YMMV) without much tuning or serious loss in image quality. Here's the commandline I used:
mkdir out
for nam in *.avi; do
  mencoder "$nam" -ovc lavc -oac lavc -vf hqdn3d \
  -lavcopts acodec=mp3:abitrate=48:vb_strategy=1:vbitrate=600 \
  -o "out/$nam"
done
Notice that I also enabled a noise filter. Due to the nature of MJPEG, there is a certain amount of noise in dark areas, which I don't really care about. Filtering noise both improves compression and image quality IMHO. Depending on your video, of course. Here the dancers are well-lit, just the background isn't; I don't want to see noise in the background amplified by a compression trying to adopt to it. :-)

Next.

Previous.