Search Results: "ag"

2 March 2007

Biella Coleman: On Edmonton, Place, and State of Mind

Recently, I got a comment on an older blog post on Edmonton that basically agreed with another comment that Edmonton was so not the cat’s meow. Despite the winter and many months later, I guess I still do think it is, although in saying so, it is not I think their assessments are wrong, I think my take has as much to do as what has come before (like NJ, which was not the high point o my life), my experiences here, and what is to come in the future. I tend to like Edmonton because there is enough stuff to do but not too much to do. It is that whole freedom from choice that I like because I often shut down in the face of too much choice. What also colors my experience in a positive light is that generally, Canadian politics, social policy, and way of life, are a step up or two (or maybe three) than that of the United States. So the worst of Canada (if you are even to call Edmonton that, which I would not), in this regard, beats out the best of the United States. And I have lived most of my life in the US so that is my point of comparison. Even if you are living in a fantastic American city, you always face the possibility of struggling in ways that will *never* happen in Canada. It makes for a calmer, less aggressive society. For example, I recently learned that Edmonton has the highest murder rate in Canada, at a whopping …. 36 people per year (population of Edmonton = 1 million). I grew up in a place, Puerto Rico where the yearly murder rate hovers at about 700-800 per year (population = 4 million). And yet people here are freaking out over the high rate of murder, which is a good thing because hopefully they can bring it down but this fact should make the US pause and think about what they are doing up north to keep the murder rate so darn low (and the answer I think is pretty easy to find). But perhaps a lot of my love of the place has as much to do or more with my state of mind. After a grueling year of finishing a dissertation under pressure as I had deadline, and then living in NJ where I was on the job market (which meant spending so much time churning out application after application and then flying around interviews), in addition to flying 7 times in one year to visit my mom, my life here just feels so much more sane than it has been in years. What sealed it all was that right before I moved here in August I was lucky enough to be offered a permanent job (which means this summer I will be moving to NYC to join this department and I will be back to the land of overwhelming choice), so that for the first time in 5 years I did not have to apply for anything in the fall that would guarantee my livelihood for the next academic year. I was not faced with a year of lots of travel (and actually traveling in out out Edmonton is really one of my least favorite things). With that firmly in place, I could just concentrate on things like my work, my friends, brewing kombucha and do things routinely, like exercise, which I had not consistently done for years. There are things about Edmonton that I find totally obnoxious like the cities inability to plow roads leaving a thick glaze of black ice on the roads so that when you drive in the city, you basically are at real risk for an accident (and this is despite a 6.6 BILLION government surplus). There are a tad too many strip malls in the outlaying areas, and of course there is the infamous winter. We are still deep in it. The cold temperatures have been with us steadily for months now and according to folks, there are still two more months to look forward to. The cold and the constant layering of clothes are getting to me a little, although I do appreciate that the cold is just not as cold as one would think with the actual temperatures. The lack of wind, the dry conditions, the cute as chubby-as-anything- bunnies that run through the snow, and the overpowering sun all help to make -6 F much more mild, so it is not as bad as you would or I would think it was. So while I am thrilled to join the department where I am moving too, I will be sad when I leave, though perhaps not as sad as Edmontons “darling” hockey player, Ryan Smith, who was just traded by the Oilers to the NY Islanders. The day he left, he literally was shedding tears at the airport. And I have to say, even though I have no attachment to hockey, I found the pictures endearing because there is nothing like seeing a grown Canadian man cry over hockey! : )

Alexander Schmehl: I'm off to Chemnitz

Not that this city would be a very attractive one (in my humble opinion), but they have one of the most interesting and well organized Linux events in germany. If you have nothing to do during the weekend (or need an excuse for not having squashed any rc-bugs ;) get to Chemnitz; it's really worth it. There'll be a Debian booth organized by Noel (Sorry, too lazy to dig out how to get your accents in HTML), as well as other interesting booths. I'll give a small workshop about debian package building. See you there!

Ross Burton: Tasks Packages

Thanks to the magic of CDBS and my rebuild script, I've now got packages of Tasks 0.2 for Debian Sid, Ubuntu Edgy and Ubunty Feisty in my repository. The Sid packages are also in the NEW queue so should hit Debian in... about three weeks. Thanks to Andrew Kerr who mailed me an initial packaging, although I think I did end up rewriting about 80% of it. NP: Yoshimi Battles the Hip-Hop Robots, The Kleptones

Nico Golde: wikipedia starts to suck

The famous Wikipedia online encyclopedia starts to suck. Well at least the German, haven't looked at other languages.
First they (ok in particular one wikipedia guy) wanted to delete the article about my favourite live cd grml (crux linux for example is deleted).

Ok could be just an action of some random idiot. But then I read an article in Tim Pritlove's weblog that they also deleted an article about Julia Seelinger a young politician of the green party in Berlin because of their so-called "relevance criterias".

And there are many other discussions about deleting articles, for example here.

WTF has happened to wikipedia? Is there any valid argument to delete an article apart from the argument that the content itself is totally wrong?
Isn't disk storage cheap enough today to keep these articles?
Wasn't one of the goals of wikipedia to catch up all the human knowledge?

Really, I can't understand this bureaucracy currently happening in wikipedia but if some random fools start to delete articles with these arguments I
wouldn't wonder if people stop writing and editing articles for the Wikipedia. It also sad for the people who put their efforts into wikipedia and wrote the articles.

Just sad.

MJ Ray: Never mind the wheels...

Never mind the wheels what about the fuel ? Update: Morrisons have withdrawn unleaded petrol from suspected stations as a precaution. Well done! Meanwhile, last I heard, Tesco were still denying that the contaminated fuel was anything to do with them, while flushing their tanks. Hey, it's not their cars which are kangarooing.

MJ Ray: Bad Tech Links for 2007-03-02

NTL blocking web sites?
Is ntl blocking access to thepiratebay or was ntl's Norwich cache broken? (Is this ntl Virgin Media now?)
BBC NEWS World Europe Gorbachev wades into piracy row
How not to make friends and influence people, the Microsoft way. With the result that:
BBC NEWS World Europe Piracy case collapses in Russia
Well, that was always going to happen!
Microsoft standards bid faces failure - Computeract!ve
and while I'm grumbling about Microsoft (which I don't do very often, but I may have a pop at Vista in a week or so), here's Open XML failing to get fast-tracked.
Denmark mandates open standards by 2008
...but they've still got friends in Denmark's standards body.
Random thought: Roomba scare
Self-improvement for Vacuum Cleaners! Now that would be bad tech.
This is a multi-part message in MIME format.
I always sign up for plain text if it's available. HTML-only is a big discouragement. HTML with a useless plain text part like that is nearly always deleted unread. Protx, this means you!
VOIP IP Telephony: Skype dumps you BIOS info and sends home!
Yet another way that Skype is evil. See also:
pagetable.com Skype Reads Your BIOS and Motherboard Serial Number
Internet phones have a lot to answer for, including my imminent router upgrade:
Bagel Belly Blog: Future proof
The browser-awkwardness of the current router's web interface is another reason I'm looking at OpenWRT-like replacements.
FastMail.FM weblog: More greylisting details
Greylisting seems good, but xbl is a terrible blacklist. I don't know how it works and it has often listed new ISP mail relays (which were not open relays or exploited). Avoid xbl.
debian.org and SPAM - MadBlog
Using RBLs to trigger greylisting seems like a good idea to me.
Sue them all.
Finally, this would be funny if it wasn't so silly. Advertisers: be careful of your music placements or you might start a bomb scare. Although, musical bombs? Wouldn't that be a bit of a Hollywood film stunt?

Martin F. Krafft: Looking for a home cinema projector

Dear Lazyweb: yesterday a good friend of mine invited me to dinner and asked me to prepare the asparagus, because she didn't know how to do it. Funny that, for neither did I. So we get online, but after the first few pages, I swore and killed the browser window, and instead turned to the #debian.de IRC channel, where I was promptly helped. The asparagus turned out to be really good, and I really didn't expect otherwise. So I went on to rave about what a great community Debian is, with the result that today she calls me up and ask me to query "my community" for advice on what projector to get. She wants a home cinema type thing to be mounted on the ceiling (so it needs a remote control), she'd be willing to spend around 600 for it, and she'd prefer if exchange bulbs didn't come in at half the price of the projector itself. Does anyone have recommendations for specific models, brands, or other stuff to look out for before we go shopping for one? Please let me know! Don't let me down on this one. :) Thanks, Lazyweb! It goes without saying that I shall update this post with relevant information. NP: Sina / Bescht of Sina Update: I previously used the word "beamer", which is used only in Germany to describe video projectors, despite it being an English word.

Mike Hommey: DPL platforms summaries

Enrico, you forgot your own advanced ways of wasting time (and have some fun). ;) Here are the summaries of the candidate DPL platforms, in one sentence each: 93sam
Once we don’t Select a friendly community where the packages towards a lot of software, community are most noticeable use to show their packages towards a problem good job.
aigarius
While I were elected DPL, I have to time leave Debian Developers Corner Site, map Search about it should not have not be Even if he has, the NM; process is before.
ajt
Ideally, I’d expect that we ought to make It work together in Linux and a DPL review of the community and October firmware resolutions recall vote maybe That’s been some of stuff I’ve been a server near you United States.
hertzog
The sponsorship, principle.
sho
I believe admit volunteers to scratch our bug tracking system I do what I would like LowThresholdNmu to happen again; Admit it has rhymes with a few of it Debian; is to be really like to automatically see them.
sjr
To the web site, map Search Not Published Yet Back to the Debian Project Select a server near you United States; the web Site, map Search Not Published Yet Back to the debian For other contact information, See the Debian Project Select a server near you United States.
stratus
It is today in the web team, the users: and waited supergroups i will that any Debian support: this change our major Desktop, with Lenny development website, we’ve now almost our official status and how a statistics page.
svenl
To the ban.
wouter
I am of a native Dutch is not an area where possible.
These summaries have been generated by the following script:

for i in 93sam aigarius ajt hertzog sho sjr stratus svenl wouter; do
  echo $i
  lynx -dump -nolist http://www.debian.org/vote/2007/platforms/$i dadadodo -c 1 - 2> /dev/null
done
It is somehow subobtimal, as aigarius and sjr’s summaries show: the headers and footers of the page have some influence, but well… it was fun anyways.

MJ Ray: OpenWRT (3)

More comments, which I think help to narrow my choice to OpenWRT or FreeWRT. Kris Marsh commented:
"I can't comment on dd-wrt, as I've never tried it. I can, however, say that OpenWRT is great. Personally, I don't see the point in X-WRT, as I use vi and /etc/ to modify configs. Assuming you're handy with Debian (;-)), then you should be just fine without X-WRT. Tip: If you want to use WPA, you need to install the "nas" package: "ipkg install nas". I believe this non-free package is what a previous commenter was referring to."
Yes, I want to use WPA (I think some of the machines here can't do IPSec and WEP just isn't good enough) so I guess I have another freedom problem. I'd be happy with ed, but I might try X-WRT just to see how it copes with my web browser (I expect badly, like many embedded web apps, but then I could file bugs or fix it up). ranf mentioned:
"There is also a OpenWRT fork named FreeWRT ."
Argh, another candidate! Seriously, thanks for the tip. I'm not sure what it offers me over OpenWRT, as FreeWRT doesn't list either my router (Belkin POS) or my office host system (gobo) as supported and I don't intend to install svn any time soon. I'll probably try its Web Image Builder. Taneli commented:
"I believe Kamikaze has open source broadcom drivers (it's using 2.6). No idea if backport exists, but I'd venture no. Using Kamikaze sounds quite dangerous, but I haven't tried."
nbd wrote:
"Hi there. A few comments on your blog post: The main reason why the free Broadcom drivers haven't been included yet is because they're simply not ready. The Broadcom SoC needs to be handled differently than the MiniPCI cards and I'm working with the bcm43xx on that. Actually the new 2.6 based port is almost complete. As to which Firmware you want: As an OpenWrt developer I very much recommend installing X-Wrt on OpenWrt :) Anyways... Have fun!"
Yes, this is definitely a "fun" choice! I guess I won't know what works until I JFDI and pick up the pieces. Glad to hear the Broadcom drivers are still being worked on: I've met a lot of Broadcom cards and some of them can only be coerced with ndiswrapper, which isn't good. I wish I knew enough about network hardware to hack sensibly, but I don't know where to start and there's so much else to do. Finally, it looks like dd-wrt isn't a good choice. Yammering (Clint Adams) linked me to this rant and Simon Farnsworth commented along similar lines:
"X-WRT is just an easier UI that installs over OpenWRT. DD-WRT is a competing project to OpenWRT, based on the OpenWRT code, but using such "free" software techniques as product activation, and per-seat licencing to stop you "misusing" your GPL rights. I'd recommend OpenWRT/X-WRT, just because they tend to be more respectful of licences, and less prone to demanding money with menances."
I've no problem with commercialism itself, but I dislike broken promises and playing fast-and-loose with copyright. If there's evidence the other way, please let me know!

Brett Parker: Welllll... in light of...

So, in light of Sven's Platform, I think I'll just not bother reading his platform when he does get off his arse and publish it (must get round to finishing off NM, must find time from somewhere). On the offchance that you're reading this after he actually publishes it, here's what it said (single line): "As protest against my unfair banning from debian mailing lists, i will not publish any platform until the weekend after the end of the ban." Isn't he clever? Isn't that a fantastic way to process - don't publish your platform (that might actually help your case, if you've got any actually reasonable ideas), just whine (again) about your "unfair" banning. *sigh*. Somedays I do just wonder about humanity.

Russell Coker: spare tires

The following letter was published in the RACV Magazine. The Royal Automobile Club of Victoria is a driver advocacy organization that provides roadside assistance and insurance. The fact that they published my letter means that the idea can't be totally wacky so I'll blog it. ;)

There have been many mentions recently in RoyalAuto about space-saver spare tires. Some manufacturers claim that they are to save weight which seems to be a benefit for the driver.

I wonder if most drivers really need a spare tire. For my own driving I only have a flat tire about every second year and I almost never drive outside the metropolitan area. Given how rarely I call for road-side assistance I think I would be better off without a spare tire and with the option of having the RACV deliver one for me if I needed it.

I expect that the time taken to deliver a spare tire would be greater than that required for a regular road-side assistance call, and that it might count for more than a regular assistance call, but given that the cheapest roadside assistance package has 8 calls a year I expect that most years I would still use less than half my quota of calls.

Not having a spare tire would save some weight (and therefore fuel) and would provide a little extra cargo space.

Also it seems to me that small cars are unlikely to ever be driven outside the area that is serviced by the RACV and similar organizations. For a small car the lack of a spare tire in the car design would offer a significant improvement to cargo capacity. If the RACV and other organizations endorsed and supported cars without spare tires then the car manufacturers could design small vehicles with more cargo capacity and less fuel use.

Jeff Bailey: Water broke

I just had a total Mr & Mrs. Smith moment. You know the bit where they're standing in the elevator, listening to the elevator music. Waiting for the door to open.

That would be the waiting time between the water breaking, causing us to page the midwife and her phoning us back. =)

The advice: Sleep now, relax.

And so shall it be. =)

(Update: 9am)
Contractions are 6 minutes apart, but still the kind she can sleep through, so she is. Spoke to the midwife, and she advises more rest. Next update with her, assuming nothing eventful, is around 1pm.

(Update: 2pm)
Contractions have slowed to every 12 minutes, but have increased in intensity. Just spoke to the midwife, who gave some tips about moving things along. She just got into the birthing centre after 3 hours of being on the road. It's usually a 30 minute trip, and she lives near us. She thinks that it will be fine, though, given that she was mostly stuck behind snow plows. Next phone call in 2 hours.

(Update: 4:30pm)
Contractions up to 5 minutes apart, lasting about 45 seconds each. We're enjoying a relaxing afternoon watching X-files. She's convinced that she's talking fine through her contractions, but her sister did a great impression:



Well, as I was saying, I ...

(she crouches over)

Oh there's one. Yup.. I'm having a contraction..

(pause)

Yup. Well. I can still talk through them.


Mhm, yup. Sure you can. =)

The midwife called us to check in. Angie described herself as "impatient". Otherwise everything seems to be going as normal. The midwife will call us again in an hour or so to sort out plans for the evening, probably including a visit to us at home since we're close enough to where she lives.

(Update: 6pm)
We've hit the magical number of contractions: every 4 minutes for 45 seconds. Apparently we're supposed to phone after two hours of this, but we phoned after one. My bad, but this is when we had planned to talk anyway. She answered the phone when we paged the midwife, and was sufficiently unable to talk that she handed to phone over to me. The midwife will be here for an in-person visit in about an hour (subject to speed of traffic)

(Update: 7:30pm)
At 7, I went out to shovel a space for the midwife to park. It turns out she drives a cute little VW bug. so at 7:15, I dig her out of the snowbank she got wedged into because I hadn't dug enough of a spot. 7:30, we're now both inside. =) Temperature is being taken, contraction charts being reviewed, etc.

(Update: 8:15pm)
The midwife just left. Right now Angie's 2cm dilated. Apparently there are multiple membranes, and they haven't all broken. This is a good thing because it continues to protect the child and give it manuverability. Charlotte will be back in 2 hours to see how we're doing.

---

I'll update this entry with random little updates, and post a new one when we head out.

Andrew Pollock: [opinion] On whacky spare tyre ideas

Russell Coker writes about not carrying spare tyres and relying on roadside assistance companies instead. I had a similar idea a while ago when I had two of my tyres slashed. I was carrying a viable spare, but with two tyres out of action, it didn't do me a lot of good. I got a tow to the nearest tyre place probably within a kilometre, but they had to order in the tyres to match what was already on the car, so I was left without a car for the remainder of the day and some of the next one. I thought it'd be a great business idea to be able to call up for roadside tyre replacement, similar to how you can "holler for a Marshall" when you get a flat battery. Incidentally, I've clearly been living here too long. I had to battle with myself to not write "tire" all the time.

Andrew Pollock: [life] Our first earthquake (that we noticed)

I do believe we may have just had a small earthquake. Sarah and I certainly both felt something. Hopefully this page will show something in a bit to confirm. Update Yup. Wow.

1 March 2007

Bastian Venthur: Pimp My Boot Process (III)

Short version:

$ sudo aptitude install desktop-base splashy splashy-themes
$ sudo splashy_config --set-theme debian-moreblue
$ sudo vim /boot/grub/menu.lst

[...]
timeout 3
hiddenmenu
[...]
# defoptions=quiet splash
[...]
$ sudo update-grub Long version: A few weeks ago I tried to improve the visual appearance of my boot process using usplash and a matching grub splash theme. It took me quite a while to create my first very own usplash theme and it was a rather complicated affair (Thanks to Petter Reinholdtsen for his patch which lead to my first working prototype). Since creating usplash themes is rather tricky and not really suitable for the average user I decided to switch to splashy. Splashy has many advantages above usplash like a very easy way to create themes, support of high resolution images and many themes already available in Debian. So here is my current solution for a nice bootup: First I installed desktop-base in order to get the nice moreblue KDM theme: $ sudo aptitude install desktop-base Then I installed splashy and splashy-themes in order to get a theme matching KDM’s moreblue theme:

$ sudo aptitude install splashy splashy-themes
$ sudo splashy_config --set-theme debian-moreblue

Since grub has only rudimentary support for theming, I decided to remove the boot menu completely. Most of the time I’ll boot the first kernel in the list anyway and you still have $timeout seconds to press Escape in order to bring the menu back. $ sudo vim /boot/grub/menu.lst

[...]
timeout 3
hiddenmenu
[...]
# defoptions=quiet splash
[...]
$ sudo update-grub The result looks quite cool and gives my boot process a polished an clean look. It’s still not perfect since splashy’s theme does not match exactly KDM’s theme and KDM flicks in an other wallpaper before it starts and after the login, but it’s good enough for now.

Enrico Zini: dpl-platform-keywords

Representative keywords of DPL platforms The DPL platforms are too long and you could use a very, very short executive summary? No problem, I have the technology for it. After the results you can find the kit to build yourself an extractor in the comfort of your home. The results Acquiring the data
for i in 93sam aigarius ajt hertzog sho sjr stratus svenl wouter
do
    wget http://www.debian.org/vote/2007/platforms/$i
done
Tokenizing
#!/bin/sh
for file in "$@"
do
    lynx -dump -stdin < $file   tr -c '[a-zA-Z]' ' '   tr '[A-Z]' '[a-z]'   sed -e 's/ /\n/g'   sed -e '/^$/d' > $file.tok
done
Extracting the most representative keywords
#!/usr/bin/python
import sys, math
def read_tokens(file):
    "Read all the tokens from one file"
    return [ line[:-1] for line in open(file) ]
# Read all the "documents"
docs = [ read_tokens(file) for file in sys.argv[1:] ]
# Aggregate token counts
aggregated =  
for d in docs:
    for t in d:
        if t in aggregated:
            aggregated[t] += 1
        else:
            aggregated[t] = 1
def tfidf(doc, tok):
    "Compute TFIDF score of a token in a document"
    return doc.count(tok) * math.log(float(len(docs)) / aggregated[tok])
# Output the top 5 tokens by TFIDF for every document
for name, doc in zip(sys.argv[1:], docs):
    print name, sorted(set(doc), key=lambda tok: tfidf(doc, tok), reverse=True)[:5]
Errata Jacobo suggests to use lynx -dump -nolist or w3m -dump for a more tokenizer-friendly text expansion.

Adam Rosi-Kessel: Ray Hagins Needs a Higher Pagerank

Celebrity 2.0.

Russell Coker: Mercedes S class and car safety

The S Class Mercedes has some really interesting safety features, see this 6.8M PDF file for details. If you are interested in technology then you want to read it just to learn about all the cool features - it's got more technology than a Prius!

The S class includes the following features to protect the occupants in the event of a crash:

The following features reduce the risk and/or severity of a crash:

After a crash there are more safety features that can help you:

These features are documented as being available in the latest S Class, I haven't investigated what is available in the cheaper models and I'm not even sure where to find information on the safety features available in older models (a second-hand E class is more in my price range). But if I won the lottery a S class Merc would be high on my list of things to buy!

If you know of other cars that have a similar set of safety features to the S class and cost less then please let me know.

I will probably write a blog post about the BMW safety features in the near future. I couldn't do so immediately because the BMW web site sucks. They have a form for me to fill in contact details so that they can post me a brochure (I want to read it NOW ONLINE). The form doesn't like my postcode and refuses to proceed (it should at least have an option for them to contact me via email or phone).

Christoph Berg: OpenPGP keys in DNS

The latest addition to the mutt CVS tree is PKA support via gpgme. While trying to figure out how that works in mutt (I haven't yet...) I configured my DNS server for PKA and CERT records. PKA PKA (public key association) puts a pointer where to obtain a key into a TXT record. At the same time that can be used to verify that a key belongs to a mail address. The documentation is at the g10code website (only in German so far). I put the following into the df7cb.de zone: cb._pka IN TXT "v=pka1;fpr=D224C8B07E63A6946DA32E07C5AF774A58510B5A;uri=finger:cb@df7cb.de"
$ host -t TXT cb._pka.df7cb.de
cb._pka.df7cb.de descriptive text "v=pka1\;fpr=D224C8B07E63A6946DA32E07C5AF774A58510B5A\;uri=finger:cb@df7cb.de"
Now gpg can be told to use PKA to find the key:
$ echo foo   gpg --auto-key-locate pka --recipient cb@df7cb.de --encrypt -a
gpg: no keyserver known (use option --keyserver)
gpg: requesting key 58510B5A from finger:cb@df7cb.de
gpg: key 58510B5A: public key "Christoph Berg " imported
gpg: Total number processed: 1
gpg:               imported: 1
gpg: automatically retrieved  cb@df7cb.de' via PKA
CERT CERT records work similarly. Records are generated by make-dns-cert (from the tools directory in the gnupg source). cb.gpg is a stripped-down gpg keyring (created with pgp-clean -s and converting from .asc to .gpg).
$ ./make-dns-cert -f D224C8B07E63A6946DA32E07C5AF774A58510B5A -n cb
cb      TYPE37  \# 26 0006 0000 00 14 D224C8B07E63A6946DA32E07C5AF774A58510B5A
$ ./make-dns-cert -k cb.gpg -n cb
cb      TYPE37  \# 1338 0003 0000 00 9901A20440 [...] 509C96D4BFF17B7
With a new bind and host (backports.org!) the format looks a bit nicer, that's also what I copied into the zone file:
$ host -t CERT cb.df7cb.de
;; Truncated, retrying in TCP mode.
cb.df7cb.de has CERT record PGP 0 0 mQGiBECBGdAR [...] UDlCcltS/8Xtw==
cb.df7cb.de has CERT record 6 0 0 FNIkyLB+Y6aUbaMuB8Wvd0pYUQta
Again, gpg can be told to use that:
$ echo foo   gpg --auto-key-locate cert --recipient cb@df7cb.de --encrypt -a
gpg: key 58510B5A: public key "Christoph Berg " imported
gpg: Total number processed: 1
gpg:               imported: 1
gpg: automatically retrieved  cb@df7cb.de' via DNS CERT
Thanks to weasel for some hints on using CERT. SSHFP I'm also mentioning SSHFP records here since it fits in the topic - I have been using them for some months now:
$ host -t SSHFP tesla.df7cb.de
tesla.df7cb.de has SSHFP record 1 1 EE49B803541293656C33B86ECD781BD8F1D78AB5
tesla.df7cb.de has SSHFP record 2 1 3E82FB5EE8AA0205305F0D0186F94D6FB3E0E744
$ ssh -o 'VerifyHostKeyDNS yes' tesla.df7cb.de
The authenticity of host 'tesla.df7cb.de (88.198.227.218)' can't be established.
RSA key fingerprint is 5a:c9:38:ca:c0:2b:11:c1:c8:fb:f1:ad:73:a1:9c:8b.
Matching host key fingerprint found in DNS.
Are you sure you want to continue connecting (yes/no)?
The records are generated with ssh-keygen -r.

Christian Perrier: Blitz NMU: no more percentages?

Some may have noticed that I have silenced myself up a little. Actually, this is mostly because the various percentages are progressing slower and slower now. While hunting ignored l10n bugs, I'm now reaching bugs around #403000 which means most of these bugs have been reported since the whole system was frozen. I still NMU a lot of packages (about 2-4 a day) and trigger more and more maintainer uploads (because, now, maintainers of packages I'm reaching are really active maintainers). The 100% heaven is still very close, but shhhhh.

Next.

Previous.