Search Results: "ag"

1 September 2007

Russell Coker: A New Spam Trick

One item on my todo list is to set up a bunch of email addresses on sub-domains of domains that I am responsible for (with the consent of all people involved of course) and perform various actions to get the addresses noticed by spammers and measure how effective the various anti-spam measures are. As part of such tests I would click on every URL in every message sent to some accounts and see what difference it makes. My plan is to run a set of Xen virtual machines with different configurations of some common anti-spam measures used in MTAs and see how they fare with sets of accounts with similar publicity. I am not aware of any work having been done in this area (a quick Google search turned up nothing). There are many honeypots for tracking spam sources, matching email address harvesting to spamming, etc. But I’m not aware of any research into the effectiveness of various methods of combatting spam by setting up multiple honeypots. Please inform me via comments if I have missed something! The most common advice about spam is to NEVER click on the URL that supposedly removes you from a list. By clicking on such a URL the spammer can recognise that you actually read the email and therefore know that it’s a live address and a good target for more spam. I am not aware of any good studies proving this, which is why it’s one of the things I’d like to investigate. A counter theory (for which there is also a lack of evidence AFAIK) is that spammers used to measure delivery etc but now that bot-nets are large and cheap it’s easier to just send mail to all possible addresses. Even though I am not aware of any great evidence to support the idea I avoid clicking on URLs in spam messages. Refraining from hitting the spam web-sites can’t do any harm (it’s not as if the meager contribution to their system load caused by my web browser will cause them a problem). But today I was tricked. A spammer subscribed me to a mailman mailing list, as I am subscribed to many lists (about half of which use mailman) the fact that I didn’t recognise the list name didn’t necessarily mean that I hadn’t signed up to it. After signing in I saw the list archives which had only one post concerning spam. I unsubscribed (there was no other reasonable option open to me) and sent the mailman message to SpamCop. This technique will probably be effective for a while. People will think that they subscribes to a list and forgot about it and that it’s just another list that doesn’t have strong anti-spam measures. That should greatly increase the amount of time taken to black-list the spam server. So from now on if I receive a spam via a mailing list that I am not familiar with then I’ll send it to SpamCop immediately. Also this is yet another good reason for not subscribing people to mailing lists without their consent (a practice that is far too common - it’s really not difficult to send someone an email asking whether they would like to join the list). If you subscribe me to a list without prior discussion and the first post I receive on the list is a spam then it will be sent to SpamCop and this might result in you being black-listed.

Miriam Ruiz: Stormbaan Coureur

The name Stormbaan Coureur means “Assault Course Driver” in Dutch. It was previously called Sturmbahnfahrer as a joke, playing with the words in german, but some people considered that name offensive, and the author, Bram Stolk, kindly decided to change it. Put a car into a course full of obstacles, and give the whole world a physically realist behaviour, and you have the basic design of this game. the game also has support for quad buffer stereo and passive stereo setups. The game has only one track for practice and another one for competition right now, but once more tracks are developed, I’m pretty sure many people will stick to it. The package for the game has entered Debian repositories today, so it’ll soon be in the mirrors, available for everyone. You can see the game in action in this MPEG movie. Impressive, isn’t it? :)

Antti-Juhani Kaijanaho: Hey, I found a bug!

Bugi (In other news, I just uploaded darcs-monitor to Debian. It’s sitting waiting for NEW processing. In the meantime, you can get the package at the upstream distribution site.)

Sven Mueller: IFA - Force-Feedback-Vest with tickling attacks.

In the recent online article heise online - IFA special - Force-Feedback-Weste mit Kitzelattacke, Heise News (a german IT news site) had a really nice caption under one image showing a new force-feedback vest by Philips. The image looks like this:
Image of the new Philips Force-Feedback Vest
The german caption is: “Philips’ Force-Feedback-Weste erm glicht t dliche Kitzelattacken in PC-Shootern.”
Translation to english is: “Philips Force-Feeback-Vest allows deathly tickling-attacks in PC-Shooters.” (Means First-Person-Shooters). Nice. That’s at least a pleasant way of dying: Being tickled to death. Of course, the article itself clears up the misunderstanding: The vest is more tickling than “punching” the player, even if his game-ego is killing most ferociously.

Lior Kaplan: OpenProj and the Common Public Attribution License

On August 20th, Projity have released OpenProj which is a Java based project management software (like Microsoft Project). With the release they made a .deb file available for download, which caught my attention. I checked the deb file, and while it probably does the work of installing the application, it’s far from being a valid Debian package. I contacted the company though the package maintainer (Laurent Chretienneau) to suggest they would invest time to make their software an official part of Debian, and I’m willing to help if needed. Laurent said they would be happy for OpenProj to be officially a part of Debian. Today, I decided it would be smart to open an ITP for the package, so other people won’t spend time doing the same packaging work as the company already did. For the ITP license field I had to check the license of the software. While it’s webpage states: ” OpenProj is a free, open source project management solution” I thought that would be a no brainer, but it seems they use the Common Public Attribution License, a recently OSI approved license. Of course the license should go though the usual debian-legal review, but I guess it would be non free due to some attribution requirements and limitations. I was disappointed to find that OpenProj isn’t licensed under the GPL or other common free software (and DFSG compliant) license. I’m still not sure if I want to invest time of they software due to this issue, I guess I’ll give it much lower priority now.

Patrick Winnertz: Virtualbox finally in Debian Main

Some good news after all After removing all remaining license issues regarding missing copyright statements or license statements in some files virtualbox is finally in debian unstable. Since I needed the statements in these files and cause of some bugfixes debian ships now an svn version. So this big and important piece of software is now finally official available. To integrate virtualbox in debian I had to remove some sourcecode and therefore virtualbox doesn't contain the Guest Additions (they contain non-free code from e.g Microsoft). The good news here are that in the next version of virtualbox these Guest Additions will be available from the website and can be downloaded automatically with virtualbox. Enjoy it! :) Thanks to feivel, who sponsored me :)

Erich Schubert: Postfix under siege

Many people will have seen their postfix reporting new errors these days, like if is overloaded:
postfix/master[7287]: warning: service "smtp" (25) has reached its process limit "100": new clients may experience noticeable delays
This is not really because your system is overloaded. To me, it looks more like a (deliberate?) malfunction of some spammers software. When you rejected it's spam mail a few times, it starts opening up lots of connections to your system, but never sends any data. They just sit there and time out.The solution is simple: limit the number of connections per client. Make sure the 'anvil' service is enabled (default at least on Debian) and then add
smtpd_client_connection_count_limit = 10
to your postfix configuration.You should now begin to see messages such as
postfix/smtpd[21680]: warning: Connection concurrency limit exceeded: 11 from unknown[210.210.247.52] for service smtp
A corean cable IP. Yeah, I don't think this would have been legitimate mail traffic anyway.Feel free to pick the limit value even lower than 10 on really busy systems (or if these 'attacks' become stronger) - most people should never need more than 2 parallel connections (note: you can send multiple emails over one connection, there isn't much to be gained by using more than one connection).

Daniel Stone: woo firefox

6124 daniels 15 0 2109m 1.5g 18m R 1 75.4 426:30.01 firefox-bin
3000000 1486 74 1 5808 962 1427069K 60K 1427129K 6124 Django Model reference Django Documentation - Mozilla


I honestly don't understand how Firefox could consume 1.5GB of RAM, as well as 1.4GB of pixmap storage in the X server. This is a new record. (And the pixmap storage rose to 1.7GB before I killed it.)

Russell Coker: Hot-swap Storage

I recently had to decommission an old Linux server and replace it with a new machine. When I was about to turn it off I noticed a power cable of the type used for IDE hard drives leaving the Linux server and entering an NT server that was in the same rack! It turned out that a DAT tape drive used for backup had been shipped without a power cable and they had been forced to take power from another machine. Incidentally is this likely to risk hardware damage? So I had to take the NT machine down to fix it. The new cable had arrived so all I had to do was install it. One thing that wasn’t mentioned on the documentation was that the cable was designed to operate as a double-adapter and replace an existing cable. Once the phone support people had explained this (IBM support is really good - they solved the problem well within the SLA) I was able to correctly wire it. However correct wiring in this case meant having a power cable go through the side of the storage bay and a SCSI cable came from the back of the case underneath the cooling fan assembly (something like 16 separate hot-swap fans in one assembly that can be removed for maintenance). The DAT drive took up space that could otherwise have been used for three hot-swap SCSI hard drives. What I would like to know is, why can’t they make hot-swap DAT drives that use the same power and SCSI connectors as the hard drives? I don’t expect a DAT drive to be any more reliable than a hard drive, and when the system backup is mission-critical then down-time is required for a replacement. Not to mention the effort involved in the installation, my fingers are significantly longer than average, I can’t imagine how anyone with average size hands could complete the job! So IBM, congratulations on the great phone support. But please try and make everything hot-swap when designing servers. Also while on the topic, I think that servers should be designed with external DVD drives connected via USB. I really hate it when I’ve got 10 * 2U servers in a rack, my system performance is limited by the number of disks and every single server has space that could be used for at least one disk sitting idle because there is a DVD drive gathering dust. For the IBM 2U servers in question, they could design them with space for 12 disks or 9 disks and one DAT drive which were all hot-swappable if they were smart about it, the current design supports 6 disks or 3 disks and a DAT.

Guido Trotter: Ganeti

Just a couple of days ago we finally opensourced Ganeti, a cluster virtualization platform based on Xen. In the last few months I joined the Ganeti team, which is based in Zurich, and worked with them on the development of this software! I’m really happy now to be able to share the result of what we’ve been doing with the rest of the world! For more information you can have a look at the project page! Of course an ITP has been filled! (ok, actually two because I didn’t notice someone in my team had already done one!) PS I’m away for the weekend, forgot my charger and am running out of battery! I’ll be back online on monday, I guess! :)

Simon Richter: Me, myself and I

Some people have hinted that while my blog started out with the occasional bit about my life, or at least a personal opinion, during the last months it has all been technical content, and most of it rants about a particularly stupid piece of technology. So, I guess I need to get a life (again). NP: Kylie Minogue - "Disco Down"

31 August 2007

Wouter Verhelst: Cute

The Belgian Navy recently acquired a new frigate, baptized the Leopold I; and it's leaving soon on a training trip. The TV news just had an interview with the captain of this vessel, who declared that the function of a frigate is to protect "other vessels"; one of the examples he gave was "a carrier vessel". What he neglected to mention is that the Belgian Navy, in all her glory, doesn't have any carriers. In fact, it doesn't have any ships that are larger than frigates. But hey, at least this frigate has a helicopter pad, so maybe it qualifies. Then again, maybe not.

Russell Coker: Carbon Geo-Sequestration

My post about Why Hydrogen Powered Cars Will Never Work has received a record number of comments. Some of them suggested that carbon geo-sequestration (storing carbon-dioxide at high pressure under-ground) is the solution to the climate change problem. The idea is that you can mix natural gas or coal gas with steam at high temperature to give carbon-dioxide and hydrogen. Then the carbon dioxide gets stored under-ground while the hydrogen is used for relatively clean fuel. Beyond Zero Emissions has produced a media release about the fallacies expressed in the FutureGen document promoting so-called “clean-coal”, the best content is in their PDF document titled FutureGen Conceptual Design Retort. Note that I did some research to support the preparation of the retort, I am not referencing them to support my arguments but as background information. One overwhealming problem with geo-sequestration for coal based power plants is that it is significantly more expensive than the current coal-fired power plant design. Currently the price difference between coal power and wind power is quite small and there are several technologies that are almost ready for production which will decrease the cost of wind power, it is expected that before so-called “clean coal” becomes viable (they are planning for the first production plants to go live in 2022) the cost of renewable energy will be lower than the current cost of coal power. There is no reasonable possibility of “clean coal” being cheaper than renewable energy. The underground reservoirs that could be used for storing CO2 currently contain brine, which can contain toxic metals and radioactive substances (according to the Bureau of Land and Water Quality in the US). If toxic and radioactive substances need to be pumped out to make room for CO2 then it’s hardly a clean process! The US Geological Survey has an interesting page about volcanic gas. Apparently it’s not uncommon for small animals to be killed when CO2 forms pools in low lying areas. If (when?) CO2 escapes from geo-sequestration the same might happen with humans. They also have a page about CO2 killing trees at Mammoth Mountain! Before I read this I never realised that plants could be killed by excessive CO2. Apparently tree roots need oxygen and CO2 in the ground will kill them. The release of 300 tons of CO2 per day killed 100 acres of trees. The FutureGen trial power plant is designed to support sequestration of over 1,000,000 tons of CO2 per year (that is over 2,700 tons per day). If it leaked at 1/9 that rate then damage comparable to Mammoth Mountain would be the result. Note that the FutureGen trial plant will be a fraction of the size of a real coal power station so an escape of significantly less than 1/9 of the CO2 from a real sequestration plant would have such a bad result. It’s interesting to note that tents and basements are documented as CO2 risks, so I guess we have to avoid camping in areas near power plants! What would happen if a large geo-sequestration project had a sudden failure? IE if the reservoir broke and all the CO2 erupted suddenly? We already have an answer to this question because such things have happened in the past. In 1986 in Cameroon 1.2 cubic kilometers of CO2 gas was released from a volcanic lake, that is 2,400,000 tons (or just over two years of output from the proposed FutureGen plant). It killed over 2000 people. What might happen if 10 years of output from a commercial scale coal power plant was suddenly released into the atmosphere? As far as I know there has been no research on de-sequestration of CO2. If a reservoir is discovered to be unstable after 20,000,000 tons of CO2 have been stored in it, what will we do? Geo-sequestration of CO2 makes nuclear power plants seem safe by comparison.

Eddy Petrișor: handy stuff for reformatting text

<eddyp> anyone knows of a quick way to reformat a text to a certain with in vim?
<eddyp> width, even
<liw> !fmt -w 42
<pkern> Something along the lines of gq I think.
<pkern> Visual gq says :help gq
<eddyp> liw: ":%!fmt -w 42" should be correct
<eddyp> thanks
* eddyp notes the fmt command for future reference
<liw> fmt is a pretty handy command at times
<ricky> Wow, that is handy.
* seanius is a fan of the J and fmt combo
<pkern> (gq has the advantage that textwidth is obeyed. And fmt could be specified with formatprg.)
<eddyp> pkern: that gq is handy, too
<eddyp> "gggqG" and bam, everything is refromatted
<eddyp> does anyone mind if I post this on my blog?
<eddyp> pkern, liw, seanius, ricky ?
<liw> eddyp, nah
<pkern> eddyp: Please enlighten me why you could possibly need our approval (apart from copying the log verbatim perhaps).
<eddyp> pkern: exactly :-)
<eddyp> verbatim copy; irc is the best source of documentation :-)
<ricky> eddyp: Go ahead :)
<pkern> eddyp: Then please correct the obvious mistake of mine: ":help gq says Visual gq", hah. And I disagree on the usefulness of IRC logs as documentation. :-P
<ricky> As a side note, the -u option seems cut words at spaces properly, which I'd been looking for :)
<seanius> eddyp: if you find my armchair opinions valuable for some reason, then by all means :)

Pierre Machard: Install Debian on Dell Vostro200

Recently, at work we changed our desktop computers. I’ve been faced to difficulties with a Dell Vostro200. Vostro had no OS. The hardware is still very recent. After 2 days I finally succeed in it. : The content of my box : (lspci and lspci -v).

migus@dazibao:~$ lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82562V-2 10/100 Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series]
01:00.1 Display controller: ATI Technologies Inc RV516 [Radeon X1300 Pro] (Secondary)
02:01.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)
So let me explain how I did.
  1. First, I used a netboot. I downloaded a recent netboot.tar.gz (from Debian website). I downloaded a daily image and use a Netboot PXE.. Not all the netboot.tar.gz are working… (That is to say, that I am not sure that all daily snapshot are working). I used this tarball:
    http://migus.nerim.net/vostro200/netboot.tar.gz
    I tried to build my own netboot.tar.gz without success. IRQ conflicts always vanished the debian-installer. I wish I had included the lastest e1000 drivers in my netboot…
  2. I had a problem of network hardware (Intel e1000 included in vostro 200 is too recent). So
  3. I decided to plug the time of my install an old 10OMb/s Ethernet card (e100 with PXE).
  4. Very quickly I had IRQ conflicts that blocked the disk detection. (SATA Controller had timeout).
  5. I passed the following arguments to the install command line acpi=off  irqpoll  vga=791
  6. Everything went well. The installer finished its work. The box rebooted.
  7. I downloaded module assistant, kernel-headers, gcc : aptitude install module-assistant gcc linux-headers-2.6.21-2
    and the e1000 driver from http://sourceforge.net/projects/e1000/. I just run make install
  8. (for lspci I ran a update-pciids (8)).
Everyting work well since :-) Conclusion :
1) Install an old PCI Ethernet card with PXE
2) Install DHCP + PXE
2a) Find a netboot.tar.gz that work without freeze. (the tarball on my website works)
2b)Do not forget to plug your USB keyboard in the usb connector just bellow your ethernet connector. (If you don’t for an unknown reason, when you type on a key, Your box get it twice….)
3) Tune the installer command line : acpi=off  irqpoll
[let’s the installer worked]
4) Download e1000 driver
5) Remove your old PCI Ethernet Card.
6) Be happy
6a)If you want to enable acpi into your desktop, once you installed your system you can try acpi=noirq irqpoll.

Biella Coleman: OA for Books vs Journals

Peter Suber provides a nice summary of the debatesaround Open Access for books vs. journals. The debate started when Karl Fogel posted a comment on my blog asking about the licensing terms for the recently released Decoding Liberation. Tonight Karl, Scott, and Samir will meet for the first time at my house. I imagine the conversation will continue to be lively!

Adam Rosi-Kessel: Targeted Spam

There should be some name for spam blog comments are actually relevant to the entry to which they respond. Might we someday reach a point when spam becomes so relevant that we actually like it? Technorati Tags:

Michal &#268;iha&#345;: World clock applet

Being far away from your home adds you need to know what time is there and whether you can safely call people not waking them up in the middle of night. So I looked for some Gnome applet that would show me time in another time zone. I expected this to be easy, but unfortunately I didn't find anything in Debian. Few minutes of Googling revealed something, but both applets I found look quite unmaintained. After a bit of testing I decided to give World Clock Applet 0.0.0 a try. It seems to work so far and installation only needed few tweaks. As I hate to use something not in Debian packages, I packaged this beast. For now it is available only in my repository, as I'm pretty sure it would not pass any license checks :-).

Kartik Mistry: ldtp 0.9.0, ayttm 0.5.0+10

* LDTP (aka Linux Desktop Testing Project) has released 0.9.0. Download it. Debian packages will be there soon (temporary at mentors). * Ayttm 0.5.0+10 is in Debian too! I have changed upstream minor version from -10 to +10 to avoid confusion with Debian revision number. Thanks to mones for upload and tips. * Late but, we submitted joint proposal for Project Days at Foss.in for ‘Debian and Ubuntu‘. I hope that it will be accepted and we will have great time/fun. Thanks to Teknofreak, Soumyadip and others for help in drafting proposal.

Russell Coker: Interesting Ideas from George Monbiot

Here is a transcript of a lecture by George Monbiot about climate change and what we need to do. The latest scientific evidence suggests that we need to cut emissions to zero by 2030 to avoid significant increases in the sea level over the next century, George describes some options that will form part of a solution to this problem. Below are my comments on what I consider the most interesting (the ideas that I hadn’t heard of before), I recommend reading the full article for the rest.
  1. Have a carbon ration for each citizen. Wealthy people who want to use more resources could buy carbon rations from poorer people on an open market. That way people who use less than their ration still have an incentive to save more because the extra savings are worth money! As everyone would then have a financial incentive to reduce emissions there would be a lot of new development of methods and technologies for eliminating or compensating for carbon emissions, capitalism works!

  2. Build battery powered cars with interchangeable batteries. The idea is that you rent a battery from a fuel company, and whenever it runs low you go to a service station and swap it for a fully charged battery (for a small fee). If doing this the service station could use cheap night-time electricity to charge the batteries, and the batteries that are charged could be used to put electricity back into the grid at times of peak demand. A common idea is to have Prius+ type vehicles charge from the grid when not being used and then sell electricity back to the grid at peak times. Implementing such a system for millions of homes is technically challenging and expensive. But having a much smaller number of service stations sell larger quantities of electricity back to the grid is easier to manage.

  3. Reduce air travel by 90%. I wonder how much of this can be achieved by using high-speed trains for all national travel systems and for most travel within the EU. I have often travelled between Amsterdam and London by train, it’s much more civilised than flying.

  4. Classic quote from George on John Howard: “if Howard believes a slight reduction in consumption is a recessionary measure he ought to see what a total reduction of land area would be as a result of the melting of the west Antarctic ice sheet. The two things are just completely out of proportion..”

George Monbiot also has recently released a new book Heat: How to Stop the Planet from Burning.

Next.

Previous.