Search Results: "ag"

23 May 2008

MJ Ray: Silver Surfer's Day 2008

Today is Silver Surfer's Day 2008, intended to give a taste of the internet to some of the nearly 10 million over-50s who aren't yet online. There's an SSD event finder on the site of organisers Digital Unite. (Thanks to SW ICT Champion for the tip.) I also spotted Rural broadband households overtake urban for the first time from Ofcom, but I wonder whether the Ofcom definition of broadband is as broken as the Ofcom definition of digital television.

Maximilian Attems: "Open Source Graphic Drivers - They don't kill kittens"

People don't seem to get that once you load a 1MB binary blob into your kernel you are no longer running a free operating system. There is no way to fix it. No way to see what is going wrong. Fedora 9 is shipping the latest xorg Release. It features major improvements for the Intel and Radeon drivers. The well known randr features got pushed even more. Plus gaining better 2D and 3D effects and important power saving improvements. Thanks to all the xorg hackers! Big blame on a unnamed company that can't keep up with latest Linux (Xen gained paravirt_ops support in 2.6.24 - oh yeah but we are still on 2.6.18 state). To truly support Linux you'd have to first release your specs and then help existing xorg hackers. Even Via seem to have got the message lately after years of no transparence.

Robert Collins: 23 May 2008

This week I've been at UDS in Prague, and looking at some possible ways to deploy bzr for packaging (which is a hot topic: developers don't want to change workflows without a concrete benefit, and definitely don't want to pay a cost for doing so - e.g. having to have all of history locally just to make a trivial change). One of the discussions inspired a scalability test for bzr - not how we think we'd deploy bzr for Ubuntu developers, just a test to understand how it would scale *if* we did it this way. Lars Wirzenius has a habit of testing VCS systems capabilities in various ways, including importing the Debian/Ubuntu source archive into them. He kindly ran a test using bzr, creating a single shared repository, with one branch in it per source packages. This took a few hours to generate (I'm not sure of the exact figure, we forgot to time it, but it was started in the afternoon and finished in the morning). The resulting repository has 21GB in its .bzr/repository/packs directory, and 500MB in its .bzr/repository/indices directory. There are 30 pack files, the largest of which is 16GB, and the smallest a few hundred kB. In general VCS terms this repository has 16000 heads, 16000 commits (because we didn't import deep archive history). But what about performance? Its currently copying to a machine where I can do some serious benchmarks using this repository. I do have some quick and dirty figures though. To branch a single package (libyanfs-java) from its branch within the repository to a new standalone branch with cold cache took ~5 seconds. Branching again from the repository now the needed data is in page cache took 0.6 seconds. Branching from the newly created branch to another new standalone branch took 0.3 seconds. There is a clear slowdown occuring here. Including startup costs the time to make a new branch is doubled by adding the branch to the repository. However as the repository is 16000 times the size, the scaling factor (2/16000) is pretty darn good. I'm stoked at this result, as I think it demonstrates just what the underlying pack store is capable of. We are working on streamlining the upper layers of bzr to make better and better use of the underlying store. For instance, John Meinel has just done this for 'bzr missing' and 'bzr uncommit'. Now I must go, time for breakfast! Woo!

22 May 2008

Lior Kaplan: Ubuntu s reportbug-ng send bug reports to Debian s BTS


I checked the Debian firefox bugs page and noticed a new bug was reported against firefox. Checking the bug report showed the bug is new as it reported against version 3.0b5. As there’s now firefox package in debian testing/unstable that was weired enough. Reading the bug report revealed these details:
Package: firefox
Version: 3.0~b5+nobinonly-0ubuntu3
and
Debian Release: lenny/sid
500 hardy-updates us.archive.ubuntu.com
500 hardy-security security.ubuntu.com
500 hardy us.archive.ubuntu.com
I mailed the user to see why does he reports Ubuntu’s bugs to Debian. He replied that he’s using the reportbug-ng program and wasn’t aware that his bug have been sent to Debian. I check the reportbug and reportbug-ng in Ubuntu and found that reportbug has the needed patch for Ubuntu:
diff -pruN 3.39/reportbug.conf 3.39ubuntu3/reportbug.conf
— 3.39/reportbug.conf 2004-12-06 13:59:04.000000000 +0000
+++ 3.39ubuntu3/reportbug.conf 2007-10-25 07:22:47.000000000 +0100
@@ -6,7 +6,7 @@
# severity normal
# BTS to use
-#bts debian
+bts ubuntu
# See ‘reportbug –bts help’ for a current list of supported BTSes # Submission address: default is ’submit’
but since hardy reportbug-ng package in Ubuntu is identical to the one in Debian.
$ rmadison -u ubuntu reportbug-ng
reportbug-ng 0.2007.10.30~feisty1 feisty-backports/universe source, all
reportbug-ng 0.2007.06.27 gutsy/universe source, amd64, i386, powerpc
reportbug-ng 0.2007.10.30~gutsy1 gutsy-backports/universe source, all
reportbug-ng 0.2007.10.30 hardy/universe source, all
reportbug-ng 0.2008.03.28 intrepid/universe source, all
Doing more checks reveals that this is a known problem in Ubuntu and is already reported at Bug #175508. This was also discussed three weeks ago on “Ubuntu Open Week - Reporting Bugs“. A quick look at the reportbug-ng code makes it clear that reportbug-ng will require more work to support the Ubuntu BTS. There were also some comments about the configuration for Ubuntu in reportbug, as it just send the reports to ubuntu-users mailing list and not to the real BTS at https://bugs.launchpad.net/ubuntu/.

Lior Kaplan: Ubuntu s reportbug-ng sends bug reports to Debian s BTS


I checked the Debian firefox bugs page and noticed a new bug was reported against firefox. Checking the bug report showed the bug is new as it reported against version 3.0b5. As there’s now firefox package in debian testing/unstable that was weired enough. Reading the bug report revealed these details:
Package: firefox
Version: 3.0~b5+nobinonly-0ubuntu3
and
Debian Release: lenny/sid
500 hardy-updates us.archive.ubuntu.com
500 hardy-security security.ubuntu.com
500 hardy us.archive.ubuntu.com
I mailed the user to see why does he reports Ubuntu’s bugs to Debian. He replied that he’s using the reportbug-ng program and wasn’t aware that his bug have been sent to Debian. I check the reportbug and reportbug-ng in Ubuntu and found that reportbug has the needed patch for Ubuntu:
diff -pruN 3.39/reportbug.conf 3.39ubuntu3/reportbug.conf
— 3.39/reportbug.conf 2004-12-06 13:59:04.000000000 +0000
+++ 3.39ubuntu3/reportbug.conf 2007-10-25 07:22:47.000000000 +0100
@@ -6,7 +6,7 @@
# severity normal
# BTS to use
-#bts debian
+bts ubuntu
# See ‘reportbug –bts help’ for a current list of supported BTSes # Submission address: default is ’submit’
but since hardy reportbug-ng package in Ubuntu is identical to the one in Debian.
$ rmadison -u ubuntu reportbug-ng
reportbug-ng 0.2007.10.30~feisty1 feisty-backports/universe source, all
reportbug-ng 0.2007.06.27 gutsy/universe source, amd64, i386, powerpc
reportbug-ng 0.2007.10.30~gutsy1 gutsy-backports/universe source, all
reportbug-ng 0.2007.10.30 hardy/universe source, all
reportbug-ng 0.2008.03.28 intrepid/universe source, all
Doing more checks reveals that this is a known problem in Ubuntu and is already reported at Bug #175508. This was also discussed three weeks ago on “Ubuntu Open Week - Reporting Bugs“. A quick look at the reportbug-ng code makes it clear that reportbug-ng will require more work to support the Ubuntu BTS. There were also some comments about the configuration for Ubuntu in reportbug, as it just send the reports to ubuntu-users mailing list and not to the real BTS at https://bugs.launchpad.net/ubuntu/. I’m still not sure what to do about the bug. On one hand, that package originates in Debian, and the bug is probably relevant. On the other hand, the cause might be a change from Ubuntu. In any case, I
don’t see the user following our BTS, and I don’t way to fixed package (if and when created) to propagate to Ubuntu.

Dirk Eddelbuettel: JPM Chase Corporate Challenge 2008

Just got back a little earlier from running the 2008 edition of the JP Morgan Chase Corporate Challenge. And again a record crowd of now just over 23000 in Chicago -- announced to be bigger than those at the JP Morgan Chase races in Boston, San Francisco or New York! This year the weather wasn't quite as stunning as it has often been in the past. But at least, temparatures in the high 40s and an overcast sky make for good running conditions. This time, two colleagues and I tried to make it close enough to the starting line to not waste too much time 'surfing' around slower runners who for whatever reason think they have to be up at the front. And that seems to have worked: despite a still crowded start, I ran even, steady and fast enough to beat the PR from 2005 by a decent margin with a (hand-stopped) time of 20 minutes and 46.65 seconds. That yields 5:5619 min/mile (or for Christian, 3:4132 min/km) which seems too fast given the splits I saw at miles two and three. Oh well -- same cours as as the other five times that I've run this, so I trust the course is USATF certified. And as always, good to hang with folks from work for a cold one or two afterwards. Given the temperatures, I didn't last very long though.

Raphael Geissert: quick post: back online

I think I was too pesimistic when I said it would take me longer to get my pc working again.
I just received the new RAM card and everything seems to be working fine again, nice :).
It's always good to have friends around.

Julian Andres Klode: The future of dir2ogg - gstreamer?


After playing a bit with gst-launch, I found out that it can convert music files and keeps the tags. Therefore, I think it would be great to rewrite dir2ogg using gstreamer (the python bindings). This version of dir2ogg will be much much smaller, and is really easy to extend. It will also support multiple output formats and does not need to know about the input files (use -i ‘SHELL PATTERN’ to include other files). But it will not really replace dir2ogg. The old dir2ogg will still be supported.

Julian Andres Klode: swfdec working perfectly with gstreamer


After the trouble with swfdec and gstreamer, I found out the source of the issue (the fluendo mp3 plugin, see below), and can now use swfdec with gstreamer. Warning: Do not use the mp3 plugin from fluendo.com swfdec does not always work with the binary mp3 plugin from fluendo.com, at least not in Ubuntu 8.04 64bit. It works with the version shipped in Ubuntu (gstreamer0.10-fluendo-mp3) and with the mad plugin in gstreamer0.10-plugins-ugly. An example is http://youtube.com/watch?v=CSp7jsV7oG0 Installation of missing gstreamer plugins This works on both, Debian and Ubuntu, provided gnome-app-install is installed (default in Ubuntu). Simply open a youtube video, and you will be asked for searching the missing codecs. This also works in almost any other gstreamer application, like rhythmbox or totem. Builds of the development branch I will provide builds of the 0.7.1 git versions of swfdec and swfdec-mozilla in my PPA soon. This version even supports fullscreen mode in youtube! The PPA will build versions for hardy and intrepid.

David Welton: Minor annoyance: spell checking in Firefox + multiple languages

I write most of my email (in gmail) and submit most web site content in English, however, a significant portion is also done in Italian. I leave the spell checker in English, because Italian is, in general, quite easy to spell, so that even as a native speaker, a helping hand is occasionally welcome. However, it isn't as if I write Italian perfectly either, so the help there would be nice as well. I find it quite annoying to go change the language in the spell checker option each time, especially when, as an example, I'm responding to email and do 2 in English, one in Italian, another in English, and so on. Ideally, some sort of adaptive technology would be possible, where it figures out what language I'm using, out of a preselected list, after a few words, and starts behaving accordingly. It seems as if there is some discussion, so hopefully a solution won't be too far in the future.

Lior Kaplan: What can Debian learn from Fedora about recruiting new people?


I’ve been visiting the fedora website in the last couple of days. One thing caught my interest, and that’s the “join Fedora” link just bellow the “get Fedora” one. I clicked on it and got to this very simple “Join Fedora” page. The appealing part is the large icons which roughly lists the main ways to contribute to Fedora:
  • Content Writer
  • Designer
  • People Person
  • OS Developer
  • Translator
  • Web Developer or Administrator
Clicking etch icon gives you a description of relevant skills, related teams and typical tasks of this role. This is very useful for people not sure about what can they do or where exactly their skills are needed. On the Debian’s website we have a “help debian” page which lists very similar functions the user can help with. The difference is that we list them at text which is less appealing than the Fedora’s icons. Fedora does have similar text to Debian, but it is organized into roles instead of suggesting everything to everyone. I also think there’s a semantic difference with the term help and join. To me joining a project sounds more strong than helping it. Probably because joining something makes you a part of it, while helping does not. Although in the end both term have the exact same meaning in for the project themselves - users getting involved. Openoffice.org has a big “I want to participate in openoffice.org” text in their font page, which like Fedora leads to a set of defined roles. Same thing in Ubuntu with their “Get Involved” page. It is important that each role page will have links the to tools people need in order to start contribute. I don’t have the required graphical skills to do such icons, but I’m willing to create/edit the pages on the Debian website. I’ll be happy to hear comments before I approach the debian-www people.

Julian Andres Klode: Ubuntu: swfdec using ffmpeg in PPA


I created a version of swfdec 0.6.6 using mad and ffmpeg instead of gstreamer, because with gstreamer it failed to play multiple videos on youtube.com. The release is available in my PPA at:
deb http://ppa.launchpad.net/juliank/ubuntu hardy main
deb-src http://ppa.launchpad.net/juliank/ubuntu hardy main
I will also provide some builds of the development branch (0.7.1) soon. Update:Maybe it was not clear, but the videos crashed the browser. It also didn’t really work in totem and I’m still looking for the source of the problem. I have every available gstreamer plugin package installed. Try it yourself, http://de.youtube.com/watch?v=CSp7jsV7oG0. It works with gnash, but gnash does not work with wordpress stats page. Update 2: I now found the real problem: I had an binary version of fluendo’s mp3 plugin installed (from fluendo.com), which caused the crash. After removing the file, everything works. (using fluendo-mp3 shipped with Ubuntu). Update 3: I removed the ffmpeg version from my PPA, as it is not needed.

Gerfried Fuchs: pgadmin3 for experimental

One of the things why I was on the tracks for getting src:wxwidgets2.8 into the pool was to be able to get a recent pgadmin3, too. The one we currently have in testing/unstable isn't even anymore able to cope with our default postgresql-8.3 version. Now that wxwidgets2.8 is in experimental for a while I tried to suggest a pgadmin3 upload to experimental. Unfortunately the package maintainer seems to be quite busy these days, thus I prepared an NMU for it, planing to upload it into the pool at the start of next week. All involved parties received mails about it—that also includes the bug reporters of the bugs it would fix. For your convenience, if you are interested, you can find the package in the meantime on my private server: http://rhonda.deb.at/debian/pgadmin3/—feel free to give it a test and send feedback along.

Biella Coleman: The Craft and Aesthetics of Code

Someone recently asked me whether it was difficult to fill up my syllabus for my hacker course. I wish. The hard part is actually deciding what to put on as there is too much. This is what I have so far but it will likely change over the summer. I have read a lot of the material but what I most excited about is teaching/reading Richard Sennet’s new book on Craft, which was recently reviewed in depth and in relationship to open source (which Sennet does discuss briefly) by Siva Vaidyanathan in the Chronicle of Higher Education (an article that I co-authored also got some props in the review, which is always nice). The question of what type of activity programming is a complex and deeply interesting one. Its craft-like roots, in part, have to do with the UNIX tradition, something written about humorously by Neal Stephenson and more seriously by other folks like Peter Salus and Chris Kelty in his wonderful rich chapter on UNIX. But craft is not enough to understand coding either. The aesthetics of coding also is a literary affair and the two pieces that capture the aesthetics of code in this light are the following two, also on my syllabus: Black, Maurice
2002 At the Edge of Language: The Art of Code. (a PhD Dissertation from the Department of English at UPenn) Chopra, Samir and Scott Dexter
2007 Free Software and the Aesthetics of Code. In Decoding Liberation. I am excited to review this material, as I need to work through my own chapter on software coding, which is less about the aesthetics of code and more about the tension between collaboration and individualism in production (which obviously maps onto questions of craft and aesthetics but is not quite the same thing).

Biella Coleman: The Craft and Aesthetics of Code

Someone recently asked me whether it was difficult to fill up my syllabus for my hacker course. I wish. The hard part is actually deciding what to put on as there is too much. This is what I have so far but it will likely change over the summer. I have read a lot of the material but what I most excited about is teaching/reading Richard Sennet’s new book on Craft, which was recently reviewed in depth and in relationship to open source (which Sennet does discuss briefly) by Siva Vaidyanathan in the Chronicle of Higher Education (an article that I co-authored also got some props in the review, which is always nice). The question of what type of activity programming is a complex and deeply interesting one. Its craft-like roots, in part, have to do with the UNIX tradition, something written about humorously by Neal Stephenson and more seriously by other folks like Peter Salus and Chris Kelty in his wonderful rich chapter on UNIX. But craft is not enough to understand coding either. The aesthetics of coding also is a literary affair and the two pieces that capture the aesthetics of code in this light are the following two, also on my syllabus: Black, Maurice
2002 At the Edge of Language: The Art of Code. (a PhD Dissertation from the Department of English at UPenn) Chopra, Samir and Scott Dexter
2007 Free Software and the Aesthetics of Code. In Decoding Liberation. I am excited to review this material, as I need to work through my own chapter on software coding, which is less about the aesthetics of code and more about the tension between collaboration and individualism in production (which obviously maps onto questions of craft and aesthetics but is not quite the same thing).

Russell Coker: Installing a Red Hat based DomU on a Debian Dom0

The first step is to copy /images/xen/vmlinuz and /images/xen/initrd.img from the Fedora (or RHEL or CentOS) DVD somewhere convenient, I use /boot/OS/ (where OS is the name of the image) but other locations will do. Now choose a suitable Ethernet MAC address for the interface (see my previous post on how I choose them [1]). Create a temporary block device for the install, I use /dev/VG0/OS-install (where OS is replaced by the name of the distribution, “f8” or “cent5“), it’s a logical volume in an LVM volume group named VG0. The device should be at least 2G in size for a basic Fedora install (512M for swap, 1G for files, and 512M free after the install). It is of course possible to use DOS partitions for the Xen block devices, but this would be unreasonably difficult to manage. An option for people who don’t like LVM would be to use files on an XFS filesystem (Ext3 performs poorly when creating and removing large files). When configuring Xen on Debian systems I generally use /dev/hda type device names. The device name seems quite arbitrary and /dev/hda is a familiar name for hard drives that many people have been used to for 15+ years. But the Fedora install process doesn’t like it and I’m forced to use /dev/xvda etc. I often install Fedora on a machine that only has 256M of RAM spare for the DomU. For recent versions of Fedora 256M of RAM is about the minimum for an install at the best of times, and a HTTP install takes even more because the root filesystem used for the install is copied via HTTP and stored in a RAM disk. It might be possible to use less RAM with a CD or DVD install or even a NFS install, but I couldn’t get CD/DVD installation working and I generally don’t give Xen DomU’s NFS access if I can avoid it. So I had to create a swap space (an attempt to do an install with 256M of RAM and no swap aborted when installing the kernel package). I expect that most serious use of Xen will have 256M of RAM or less for the DomU, part of the problem here is that Xen allocates RAM not virtual memory. VMWare allocates virtual memory so the total memory for virtual machines can be greater than physical RAM and thus this problem will be less common with VMWare. I believe that the best way of configuring virtual machine images is to have the virtual machine manager (Xen in this case) provide block devices to the virtual machine and have the virtual machine implement no partitioning (no LVM or anything equivalent). The main reason is that DOS partition tables and LVM configuration on a block device used by Xen can not be used easily in the host environment (the Dom0 for Xen). I am not aware of how to access DOS partition tables (although I’m sure it’s possible somehow) and while LVM can be used it’s a bad idea due to the fact that there is no way to deactivate a LVM volume group that is active, and the fact that there is no support for having multiple volume groups of the same name. The lack of support for multiple volume groups of the same name is a reasonable limitation, but an insurmountable problem when using a virtual machine environment. It’s quite reasonable to create several cloned instances of a virtual machine and renaming an LVM volume group would require more changes inside the virtual machine than you would want. Also using snap-shots of old versions of the virtual machine data is difficult if the same volume group name is used. So for ease of management I want to have filesystems on block devices (such as /dev/xvda) instead of partitions (such as /dev/xvda1). Unfortunately Anaconda (the Fedora installer) doesn’t support this. So I had to do the initial install with DOS partitions and then fix it afterwards. So use the manual option and create a primary partition for the root filesystem and then create a non-primary partition for swap (when using small amounts of RAM such as 256M) so that swap can be used during the install. The root filesystem needs to be at the start of the disk to make it easier to sort this out later. After installing Fedora and shutting the virtual machine down the next step is to copy the block device to the desired configuration (filesystem on an unpartitioned device). If the root filesystem is the first partition then the first 63 sectors will be the partition table and reserved space so dd can be used to copy the data with the following commands: dd if=/dev/VG0/OS-install of=/dev/VG0/OS bs=512 skip=63
e2fsck -f /dev/VG0/OS
resize2fs /dev/VG0/OS The next step is to mount the device /dev/VG0/OS in the Dom0 to change /etc/fstab, I use /dev/xvda for the root device and /dev/xvdb for swap. Now to remove the cruft:
Avahi is a network service discovery system, mainly used for laptops and isn’t needed on a server, it is installed by default on all recent Fedora, RHEL and CentOS releases but it is not useful in a DomU (any unused network service is a security risk if you don’t disable or remove it). Smartmontools is for detecting impending failure of a hard drive and does not do any good when using a virtual block device (you run it on the Dom0). It might be considered a bug that smartd doesn’t exit on startup when it sees a device such as /dev/xvda. The pcsc-lite package for managing smart cards is of no use to me and all the other people who don’t own readers for smart-cards, and it can therefore be removed. Bluetooth networking support (in the package bluez-utils) is also only usable in a Dom0 (AFAIK), and the only bluetooth device I own is my mobile phone so I can’t use it on my computer. The command “yum remove avahi smartmontools pcsc-lite bluez-utils” removes them. For almost all of my DomU’s I don’t use NFS or do any printing, so I remove the packages related to them. Also autofs is in most cases only useful for servers when mounting NFS filesystems. I remove them with the command “yum remove nfs-utils portmap cups autofs“. The GPM daemon (which supports cut/paste operations with a mouse on virtual consoles) is of no use on a Xen DomU, unfortunately the vim-enhanced package depends on it. I could just disable the daemon, but as I like to run small images I remove it with “yum remove gpm“. I may have to reinstall it on some images as some of my clients like the extra VIM functionality. It’s unfortunate that debootstrap doesn’t work on CentOS (and presumably Fedora) so installing a Debian DomU on a CentOS/Fedora Dom0 requires creating an image on a Debian machine or downloading an image from www.jailtime.org . Sample Xen Config for the install: kernel = “/boot/OS/vmlinuz”
ramdisk = “/boot/OS/initrd.img”
memory = 256
name = “OS”
vif = [ 'mac=00:16:3e:66:66:68, bridge=xenbr0' ]
disk = [ 'phy:/dev/VG0/OS-install,xvda,w' ]
extra=”askmethod text” Sample Xen Config for operation: kernel = “/boot/cent5/vmlinuz-2.6.18-53.el5xen”
ramdisk = “/boot/cent5/initrd-2.6.18-53.el5xen.img”
memory = 256
name = “cent5″
vif = [ 'mac=00:16:3e:66:66:68, bridge=xenbr0' ]
disk = [ 'phy:/dev/VG0/cent5,xvda,w', 'phy:/dev/VG0/cent5-swap,xvdb,w' ]
root = “/dev/xvda ro”

MJ Ray: Updating the Accounts

I finally closed my cooperative's annual accounts for the year to 5 April 2008 yesterday. We wrote off one project (not bad for a year) and now we can start on the annual reports. For day-to-day entries, we're still using my simple scheme/web app called SQL-Journal and I should make a new release real soon now. I've added some features since 1.3 and there's a few more I want to add, but I'm no accountant, so it will remain simple and stupid, but good enough for me. Bristol Wireless's accountant has written some comments on GNUcash which is an interesting view: "not quite there yet" which could help finance software developers. Better searching is one thing I will add to SQL-Journal some time, but it will probably never have features like reporting (I either use an SQL-based report package or export to a spreadsheet) and I know it's no better at handling VAT, mainly because TTLLP isn't VAT-registered yet. I also spotted Finance software in Emdebian, by Neil Williams recently. I wonder if the bursts of accounting interest are connected to the end of the financial year?

Kartik Mistry: How to not lose your customer?


* I had really nice experience yesterday (oppose to my usual real life experiences nowadays). I was trying to get ticket to Mumbai (home). Since, I don’t own credit card (and wish to in future), I was not able to book air tickets, agent was option but I wanted it as early as possible. There wasn’t any train ticket, so I took brave step and decided to go by road (bus). Checked redbus.in and found that tickets are available and they are giving facility to book ticket by debit card too! I try to book ticket but somehow it was failed transaction :( But, to my surprise, I got call from redbus customer care and they told me that if I can book ticket on phone. I said, oh yes! And, today I get my ticket delivered to office. I am now loyal customer of redbus :)

Daniel Kahn Gillmor: New York State Electronic Records Report

The CIO and the Office For Technology of New York State (USA) just released a new report on electronic records strategy, titled A Strategy for Openness: Enhancing E-Records Access in New York State. I submitted my own comments during the call for public comments earlier this year -- apparently there were only 114 comments submitted by the public (you can see the call for comments and an overview/analysis of the responses). I wish there'd been more, since it looks like the 59 individual commenters were overwhelmingly supportive of a requirement for the Gov't to use ODF. The rest of the comments were from governments, NGOs, and businesses, and they don't seem as unanimous as the individual commenters. Looking at the metadata for the executive summary shows just how far we have to go:
[0 dkg@squeak doc]$ pdfinfo PartIerecordsStudy.pdf    egrep '^Title Producer Creator'
Title:          Microsoft Word - PartIerecordsStudy.doc
Creator:        PScript5.dll Version 5.2.2
Producer:       Acrobat Distiller 8.1.0 (Windows)
[0 dkg@squeak doc]$ 
And in a message sent to commenters announcing the report, they seem to be aware that they're not quite doing their best at interoperability:
(Please note this is the first time any of NYS government's agencies has ever published a document in ODF format. We ran into problems this morning not caused by the format, but rather with some controls on our systems which were not prepared to encounter such documents. So the website links to ODF versions are not working at the moment, but will be repaired soon).
What web server are they running that is having trouble "encountering" ODF? No surprise:
[0 dkg@squeak doc]$ wget -S -O/dev/null 'http://www.oft.state.ny.us/policy/esra/erecords-study.htm' 2>&1   grep Server
  Server: Microsoft-IIS/6.0
[0 dkg@squeak doc]$ 
Sigh. My initial reaction to the report (i've only read the executive summary, not the supporting documentation) is disappointment. While they claim that "openness" is an important feature, they fall far short of taking a strong stand for free and open formats. The main thrust of the executive summary seems to be (paraphrasing here, i welcome corrections): While these are unsurprising conclusions, they don't take the strong stand i'd like them to take. They seem aware of the "chicken and egg" problem of wide adoption and vendor support, and aware of the anti-democratic effects of proprietary formats. But they don't seem to be willing to act as a catalyst to push free formats explicitly. If they did, they could break the chicken/egg vendor lock-in cycle and facilitate better open government practices while simultaneously encouraging a healthy information ecosystem. At this point, i suppose my biggest hope from the process is that the proposed ERC forms pilot groups with long-term goals modeled after Munich, but i'm not holding my breath. If there are any advocates or participants in the Munich process who want to share what's been working for you (and what hasn't), i'd be interested in hearing about it.Tags: government, odf, policy

Michal Čihař: Most interesting things on my blog

It sometimes funny to review web server stats to see what people are looking for in my blog. I usually expect something like my name and projects I participate on. But there are some surprises:
  1. cihar
  2. gammu
  3. dosbox games
  4. pissing
  5. mpd sonata
  6. wammu
  7. phpmyadmin
  8. project names
  9. sound juicer mp3
  10. phpmyadmin themes
For most of them I'm in first page in Google results, even though I have no idea why are my posts ranked so high even for such generic things as "product names", but I don't care. What surprises me most is "pissing". I guess I know what are people looking for when they enter this word to Google ;-). But according to Google webmaster tools, I'm somewhere near 110th position. Why the hell does somebody look so deep in results? And why does he go to one line blog post? I really don't understand this. Maybe I should focus on this word and bring my post to first page of Google results ;-).

Next.

Previous.