Search Results: "ag"

17 July 2008

Thijs Kinkhorst: FEE error on Nikon DSLR - fixed

Recently my Nikon D70s, when using a new Sigma lens, displayed the following error in the aperture display: fEE. As it took me some time to find out the cause and fix it, I'll explain it here perhaps for the benefit of others. What does it mean? Some lenses require that the aperture is set to smallest when they are connected to the body (the largest f-number; this is usually coloured orange). fEE is indicated when the lens is connected wrongly and the camera refuses to operate until the lens is reconnected. lensbody If like me you still get the fEE even though you've connected the lens correctly, then obviously something is broken. The camera "knows" whether the aperture ring is set to the right value due to a notch on the lens (rightmost picture) and a switch on the body ("EE Servo Coupling Post", left picture). In my case the switch on the body had broken off. You can of course send your camera in for repair, but for me it was easily repaired by sticking a hairpin in the switch. A little piece of plastic and some superglue could work as well.

MJ Ray: Batting Against Three Strikes through the Back Door

One of the reasons that I didn’t post much last week was that I was contacting some of my MEPs as part of the Telecom Packet Action in order to help defend cooperative software distribution and use. This is a bit longer than my usual posts and no software is announced below, but I’m posting it here in the hope that more people will take part in this campaign that affects every EU internet user. In short, some MEPs that I remember from the Software Patent campaign proposed amendments that would enable the unpopular three-strikes regime, where internet users could be disconnected and fined if they had three allegations of copyright infringement made (not necessarily proved AIUI) against them, and ISPs could be required to block legal peer-to-peer cooperative distribution systems like BitTorrent. ISPs would also have to distribute official advice about proper internet use and I remember how good that often is. Note that three-strikes wasn’t explicit in the amendments, but there did appear to be loopholes which could be used to allow it, such as only prohibiting technical feature requirements. For longer descriptions, see articles by La Quadrature du Net (Squaring the Net) and The Open Rights Group. The UK Independence Party MEPs replied quickly that they would vote against, mainly because of the source of the legislation. I don’t completely agree with that, but at least UKIP does what it says on the tin. Neil Parish MEP of the Conservatives sent me back a reply which referred to unknown numbering (H1, K1 and so on) and generally seemed like a mish-mash of replies that other people had received. I replied with questions about several aspects, including asking where his numbering came from, and I’ve not seen an answer yet. I’ll email him again in a few days because it’s been over a week. I was really annoyed by the reported complaints by Malcolm Harbour (Conservatives lead MEP on this issue) about how voters have reacted to these amendments, where he called it “scaremongering” amongst other things. No mongering was required - those amendments are damn scary. See comments from a media solicitor at the end of a BBC report:-
“The amendment will cause several problems, firstly, many broadband users routinely transfer large files which are encrypted. “Many of these are acting quite legitimately and in order to determine whether or not such large files are or are not the produce of illicit file sharing the ISP will have to carry out an unprecedented degree of analysis of its customers’ traffic. “Furthermore, computers are frequently shared - within offices, within homes, within educational institutions and inadvertently, where wrong-doers “piggy back” on an inadequately secured Wi-Fi connection. “All this raises the spectre of people losing internet access - for reasons which are no fault of their own.”
The main thing that these actions over the last few years have taught me is the broken state of European Union decision-making. I know I’m sometimes dissatisfied with problems in local and civil democracy, but the EU is a good idea whose democracy and accountability seems broken on a massive scale. There are just too many disconnects, as far as the ordinary voter can see. We put things in to elections and consultations and get bizarre law-making like this. If we act to correct the bizarre law-making, some MEPs start criticising us quite severely. And what kind of stupid representative system allows the representatives to repeatedly blame the voters but still be safely elected because of their high position on their party’s list? I’d love a simple, reformist constitution that’s simple enough for people to actually understand, approve in referendums and participate in the EU effectively. I doubt it will happen in my lifetime, though.

Stefano Zacchiroli: paper about mancoosi at debconf8

Mancoosi paper for DebConf8 now available As previously announced, I'll be attending DebConf this year, as I did for the past 3 years. Beside the usual projects and ideas one carries with himself on his way to a DebConf, this time I will also be there to present part of my everyday work in the Mancoosi project. Very briefly (and a bit too simplistic) Mancoosi is working on pushing forward the research and technology needed to deliver better package managers to the users of open source software distributions. The project presentation event proposed by me and Ralf Treinen has been accepted in the DebConf main track. The presentation will discuss what the former EDOS project did, what Mancoosi is doing right now, trying to focus on their relationships with Debian. In case you are interested I suggest to attend the talk which will be delivered by yours truly (what else can I suggest? :) ) In the meantime, the accompanying paper is now available, you can take a sneak peek if you are interested in knowing more about Mancoosi right ahead. The paper is available in .pdf format from both my homepage and from the Pentabarf event page as an attachment (the latter, as all Pentabarf events, needs login for reasons that I still fail to understand ...). Download

Lior Kaplan: Hosting Debian people in Israel


This week was the third time this year I got to host people from Debian in Israel. I find it very interesting to meet people from the project in a totaly different environment from the usuall confrences. Having a relax talk (and maybe some good food) is a better way to know people than the quick talks I’m used to from more formal meeting. And having the chance to show them a city or the country is of course something I can’t do abroad (: So, if you’re in the area - let me know. I can’t provide a place to crash, but can still help… p.s. The invetation is open to any free software related people… don’t be shy.

16 July 2008

Raphael Geissert: DEHS reports url change (a.k.a. update your links)


Quick post: Please update your links pointing to maintainer.php

The new reports page is report.php and has a more DDPO-like params style.

Examples:
DEHS report for package lojban-common:
Old: htt p://dehs.alioth.debian.org/maintainer.php?name=lojban-common
New: http://dehs.alioth.debian.org/report.php?package=lojban-common

DEHS report for filippo:
Old: htt p://dehs.alioth.debian.org/maintainer.php?maint=filippo[at]debian.org
New: http://dehs.alioth.debian.org/report.php?login=filippo[at]debian.org
New2: http://dehs.alioth.debian.org/report.php?login=filippo

Note that the maintainer.php script will still work for some time but please update your links whenever you have a couple of minutes to do so.

Chris Lamb: BTS bot improvements

A little while ago I completely rewrote the #debian-devel-changes IRC bot so it was actually maintainable. At the same time I added some commands suitable for developers, but I didn’t really advertise them anywhere. Here goes.
!bug <bug-number>
Print a one-line synopsis of the specified bug. The parser is fuzzy and will find the bug number embedded in URLs, etc.
!madison <source-package>
Print a colourful rmadison output for the specified package.
!qa <source-package>
!overview <source-package>
Prints the URL of the Debian PTS entry for the specified package.
!changelog <source-package>
Prints a URL containing the most recent debian/changelog file for the specified package.
!copyright <source-package>
Prints a URL containing the most recent debian/copyright file for the specified package.
!bug_graph <source-package>
!buggraph <source-package>
Prints the URL of the bug graph for the specified package.
!buildd <source-package>
Prints the URL of the non-experimental buildd status of the specified package.
!popcon <source-package>
Prints the URL which contains the popularity-contest data for the specified package.
!dehs <source-package>
Prints the URL which contains the Debian External Health Status of the specified package.
Some notes: As always, patches and suggestions welcome. (Source).

David Watson: Thanks Guys

Just over three weeks ago I started a new job, I left my position as a Network Manager to start a job as a Linux Consultant. On my last day I was given a rather generous collection from everyone there. The purpose of this post is to show everyone that the money was well spent, the picture shows the books and DVDs that I bought. Thanks guys.

David Nusinow: Goings On

I've been rather disconnected lately, trying to finish my PhD, find a job, etc. I got permission from my committee to start writing my thesis a few weeks ago, so I've been trying to get that in gear, as well as finishing up data for publication. This should all be done by November, if all goes well, so I can get back to spending more time on the things that I love.

I've tried to stay somewhat current with what's going on, and there's been a noticeable change over the past couple weeks in the tone of discussion around the community. I've personally been fascinated by the appearance of two things: the Linux Hater's Blog and the debate about Gtk 3.0. What's striking about both of these things is that they focus very much on the more consumer-oriented side of Linux. It's all about pleasing the independent vendors and grandma, and not about doing cool things. This is a huge shift from a few years ago. When I (and I assume many of us) got started with Free Software it wasn't really about these things, but more about getting your own work done and less about pleasing other people. Pleasing others was good of course, but it wasn't really expected. Just getting the system up and running was cool at the time, but using it exclusively for all your work? Only if you were in the right line of work!

We've come to a point where we expect a hell of a lot more though. We've got very vocal community members who want to spread Linux far and wide, and they want to do it today. And arguably, Linux is ready for it. We have good software that works rather well, can be easily installed and set up, and will run most of what people need. Yay us. On the other hand, after spending the better part of the decade using Linux on the desktop I'm finding that I agree with almost everything that the Linux Hater's Blog says. It's hard to argue with the truth, and the truth is that things are still difficult for people. I've spent the last few years trying to make X in Debian easier for people to deal with, and I've barely made a dent in just this one problem. And there's plenty more to pick and choose from. Sure, you can talk about how Windows and OSX have problems too, but we can't just be as good as them. We have to be better if we want to spread Linux and Free Software far and wide.

But do we really want to do that? Well, to be honest, I don't think it matters. No matter whether or not you care about grandma using Linux, we all want to have systems that work well and are easy to manage. Currently we have a lot of things in modern distros that could be a hell of a lot better. And many of them are directly related to fundamental assumptions we've made that don't really hold up as well as they should. They lead to lots of extra work leading to a sub-par product. We can do better and we should do better. If we have the absolute best system, world domination would be a natural side effect.

That's why I think that things like this need to stop and that we need more things like this. Sure, one is a hell of a lot harder, but no one cares if you solve an easy problem. It's the hard ones that matter, and provide the real payoff in the end. We need a better system to stop the hemorrhage of developers to OSX. When Miguel talks about how the people pushing for gtk 3.0 are all using OSX, I get very worried. If we want to be in control of our own destiny then we need to face our problems head on, and solve them.

Stefano Zacchiroli: updating w3-recs

revamping w3-recs: new specs, misc improvements After quite a lot from my initial adoption, I've spent some time to update w3-recs. Beside the long overdue update of shipped recommendations (quite a few new specification was released, mostly related to SPARQL, but a few more have been edited, including CSS 1 and 2), I've also uploaded some pending improvements. A couple of bug fixes were about dangling links and registration of recommendations with the GNOME devhelp stuff. Additionally, I've also moved all the documents registered with doc-base under the new Help/Standards section of doc-base, which seems to be fit for W3C Recommendations. Apparently we have finally managed to have a proper section tree for doc-base, the decoupling of that tree from the Debian menu one will not be missed (at least not by me). During the process I've also discovered a (recent?) change in debhelper semantics. Thus far I used to have broken doc-base document IDs in w3-recs, as they contained uppercase letters, which are prohibited according to /usr/share/doc/doc-base/doc-base.txt.gz. My fault, I concur, but in the past the documents got installed anyhow without any problem. On the contrary, with the latest debhelper all documents got written to the very same file, apparently stripping away the part of their names which do not match the used lowercase regular expression. Well, not too bad, I fixed one more bug, but with a warning fixing that would have been quicker. Also, /me wonders, if everything (but package build :-) ) worked properly with uppercase document IDs, why the heck one should forbid them in the doc-base specification?

Russell Coker: Xen and EeePC

I’ve been considering the possibility of using Xen on an ASUS EeePC as a mobile test platform for an Internet service. While the real service uses some heavy hardware it seems that a small laptop could simulate it when running with a small data set (only a few dozen accounts) and everything tuned for small amounts of RAM (small buffers for database servers etc). According to the wikipedia page about the EeePC [1] the 70x and 900 versions of the EeePC use a Celeron-M CPU. According to Wikipedia that is based on the Pentium-M (which lacks PAE support and therefore can’t run Xen). The Fedora Tutorial about the EeePC has a copy of the /proc/cpuinfo data from an EeePC [2] which shows that the model in question (which is not specified) lacks PAE. Are there any 70x or 90x variants that have PAE? Intel sometimes dramatically varies the features within a range of CPUs… The 901 version and the 1000 series use an Intel “Atom” CPU. According to discussion on the Gentoo Forums some Atom CPUs have the “lm” flag (64bit) but no “vmx” flag for virtualisation [3] (which means that they can run Xen paravirtualised but no KVM or hardware virtualisation for Xen), it also has PAE. This is more than adequate. According to the Wikipedia page the Atom comes in both 32bit and 64bit variants [4]. Hopefully the 901 version and the 1000 series EeePC will have the 64bit version. The 90x versions have support for up to 4G of RAM but the 1000 series is only listed as supporting 2G, hopefully that will be 4G or more (although I wouldn’t be surprised if Intel had a chipset supporting only 4G of address space and PCI reservations limiting the machine to 3G). But even 3G will be enough for a mobile test/development platform which should make it easier to debug some problems remotely. The 901 is available in Australia for just under $700. It’s a little more expensive than previous EeePC variants ($500 is a magic number below which things can be purchased with significantly less consideration), but it still might be something that one of my clients will pay for. The prime aim is to be a mobile sys-admin platform that can be carried anywhere, running a Xen simulation of the target network is an added bonus. Any suggestions for other laptops that should be considered will be welcome. It needs to be light (1.14Kg for a 901 EeePC is more than I desire), small (a reduced display size is not a problem), and not overly expensive ($700 is more than desired). Update: JB HiFi is selling the 1000H model [5]. The 1000H has an 80G hard disk and weighs 1.45Kg. The extra 210g and slightly larger size are a down-side, as is the extra ~$50 in price. A comment was made that OpenVZ could be used. If that avoids the need for PAE then a 702 series would do the job (with some USB flash devices as extras). The 702 is a mere 920g. Update: This ZDNET review shows that the 901 can only handle 2G of RAM and has an Atom CPU that is only 32bit [6].

Russell Coker: Mobile SSH Client

There has been a lot of fuss recently about the release of the iPhone [1] in Australia. But I have not been impressed. I read an interesting post Why I don’t want an iPhone [2] which summarises some of the issues of it not being an open platform (and not having SSH client support). Given all the fuss about iPhones (which have just arrived in Australia) I had been thinking of writing my own post about this, but TK covered most of the issues that matter to me. One other thing I have to mention is the fact that I want a more fully powered PC with me. So even if I had a Green Phone (which doesn’t seem to be on general sale) [3] or OpenMoko [4] I would still want at least a PDA running Familiar and preferrably a laptop - I often carry both. A Nokia N8×0 series Internet Tablet [4] would satisfy my PDA needs (and also remove the need to carry an MP3/MP4 player and audio recorder). When doing serious travelling I carry a laptop, a PDA, and a MP3 player all areas of my digital needs are covered better than an iPhone could reasonably manage. Finally mobile phones tend to not work or not work well ($1 per minute calls is part of my definition of “not well”) in other countries. While I haven’t been doing a lot of traveling recently I still try to avoid buying things that won’t work in other countries. I had planned to just mention TK’s post in a links post. But then a client offered to buy me an iPhone. He wants me to be able to carry a ssh client with me most places that I go so that whenever his systems break I can login. Now apart from the lack of ssh client support an iPhone seems ideal. :-# The cheapest Optus iPhone plan seems to be $19 per month for calls and data (which includes 100M of data) and $21 per month over 24 months for the iPhone thus giving a cost of $40 per month for 100M of data transfer (and a nice phone). There is a plan ofr a $19 per month iPhone, but that has a $19 per month un-capped phone plan and doesn’t sound like a good way of saving $2 per month. The “Three” phone company offers USB 3G modems for $5 per month (on a 24 month contract) and their cheapest plan is $15 per month which gives you 1GB of data per month and $0.10/M for additional data transfer. So it’s $20 per month for 1G (which requires a laptop) vs $40 per month for 100M. Three also has a range of phone plans that allow 3G data access over bluetooth to a PC, it seems that a Nokia N8×0 tablet can be used with that which gives a result of two devices the size of mobile phones. But that costs $20 per month (on top of a regular Three bill) for a plan that offers 500M of data and still requires two devices while not giving the full PC benefits. In the past I’ve done a lot of support work with a Nokia Communicator, so I’ve found that anything less than a regular keyboard really slows things down. While a EeePC keyboard is not nearly as good as a full sized keyboard it is significantly better than a touch-screen keyboard on a PDA (IE the Nokia N8×0 or the OpenMoko). At the moment I’m looking at the option of carrying an EeePC with a USB Internet access device. That will cost $20 per month for net access. The cost of the EeePC is around $300 for a low-end model or about $650 for a 901 series that can run Xen (as noted in my previous post I’m considering the possibilities for having a mobile Xen simulation of a production network [5]). The savings of $20 per month over 24 months will entirely cover the cost of a low-end EeePC (ssh terminal, web browsing, and local storage of documentation) and cover most of the cost of a high-end EeePC. Another possibility to consider is using an old Toshiba Satellite I have hanging around (which I used to use as a mobile SE Linux demonstration machine) for a few months while the price on the EeePC 901 drops (as soon as the 70x series is entirely sold out and the 1000 series is available I expect that the 901 will get a lot cheaper).

Chris Lamb: Nouveau nVidia drivers now available in Debian experimental

You can now try the “Nouveau” free software nVidia video drivers from Debian experimental. If you would like to try them: Editing your xorg.conf may be as simple as the replacing nvidia or nv with nouveau; nouveau won’t be chosen automatically over nv yet. If your xorg.conf has collected a lot of cruft over the years, see this wiki page for some pointers on what you can remove. For the status of the drivers with your particular card, please see upstream’s compatibility matrix. My experience has been positive; I have been using them for about two months on my dual-head 8600GT (NV50) setup with only a few small issues and a generally superior Gnometris experience. Some notes: Many thanks to:

Wouter Verhelst: No more 'government'

So apparently the Belgian 'government' has failed to meet its deadline; and as a result, the prime minister has handed in the 'government's resignation to the King. I say 'government', because these people have been doing quite a lot of things—all except governing... I must say I can't be surprised. I never liked Leterme; not before the elections, and not after. Now that more than a year has passed since his winning the elections, they have managed to accomplish exactly nothing. Well, that's not exactly true. There's a pattern here: And even after that horrible track record, CD&V/N-VA is still not willing to put Leterme aside as a candidate for the prime ministry. Now I'm sure some people will tell me that Leterme did indeed, accomplish something, such as the budget agreement of a few days ago. Well, here's a news flash: if you want to get a government set up, then not accomplishing that is pretty critical; something routine and simple as a budget is hardly noteworthy, then. The one thing I do not understand, have never understood, and will not ever understand, is why the larger parties in Belgium feel so compelled to create "cartels" with small extremist fringe parties. They all fell into that trap; VLD (liberals) with Vivant (economic strangelings); CD&V (catholic democrats) with N-VA (flemish nationalists), and SP.A (socialists) with Spirit (left-wing something). I have no trouble understanding why the fringe parties want to do this (gives them power where occasionally they wouldn't have any), but the large parties? It only causes trouble (as the CD&V/N-VA cartel has now proven beyond any doubt); and I seriously doubt it causes them a net win in votes. I could say that some other things about the past deb cle also puzzle me, such as the insistence of some people to get an unconditional split of BHV, thereby destroying all chances of even remotely reaching a compromise; but given the idiocy explained in the previous paragraph, I should hardly be surprised. Sigh. I wish I had some decent politicians in this country; but the people I voted for lost seriously, and were not part of the negotiations. I guess that should mean I have to say: told you so; but then, that's not very productive either. Here's for hoping they can still find some way out of this mess...

John Goerzen: Bicycling to Work Update

Back in May, I wrote about starting to bicycle to work. My plan was to do that 3 days a week. My ride is 10 miles each way, with the first 2.3 miles on dirt, gravel, and sand roads.

It's been going well. Yesterday was the first day that the ride really felt easy. It's been getting more and more fun, too.

And I've been getting faster. My worst time lately was 49 minutes, also yesterday morning. I really was riding slower than I felt normal, just taking it easy. But I had a headwind, and when I started my normal time in calm conditions was 60 minutes or more. That's almost a 20% improvement already.

Due to vacations, holidays, and weather, I haven't been able to average 3 days a week. When it's raining, or has rained recently, our roads get muddy and pretty much impassible on bicycle. Though some days, my ride is 2 miles longer because the short route is too muddy but the long route isn't.

So, overall, I've been enjoying bicycling, and plan to keep doing it.

MJ Ray: Standing for Election to SPI Board Again

Software in the Public Interest is a US tax-exempt not-for-profit organisation that supports a number of free software projects that I like - including debian, GNUstep and drupal - and it’s one of the most open and democratic free software organisations in the world. SPI’s next board meeting is today (Wednesday) at 1900 UTC on irc.oftc.net #spi and logs should appear here and on spi-general less than a day after. I’ve not seen a formal announcement yet, but I expect the agenda will appear here. (Update: the meeting has been postponed until after the election, but that wasn’t announced.) I’ve posted the log of the last board meeting and the log of the annual meeting to spi-general. I’m standing for election to the board for the second time. My platform contains four main proposals:-
  1. Anonymise SPI votes - all votes are traceable at present
  2. More SPI news - including getting the official announcements out on time
  3. Consult members more - run a web panel, if members are interested
  4. Report on SPI performance - at least some annual report
and free software developers who have joined SPI (at no cost) can vote for me online. If you’ve got any questions about my platform, please ask them here - or anywhere else that’s appropriate - and I’ll try to answer. I think it’s a much better platform because I learnt a lot from the last campaign, so I hope you’ll vote for me.

15 July 2008

David Moreno Garza: LOL

grafo.gif

Sandro Tosi: Having fun fixing a bug (with ParallelPython)

Lenny general freeze is approaching, so I'm walking thru my packages bugs and I found this one reported against fdupes.

I got 4Gb of memory, so how to reproduce an OoM? Let's start with a rather large file base, but I need a script to generate it. With 4 cores and a fast Raptor hd, I want something to stess them while learning something: Python + ParallelPython was the answer!

I wrote a small script that takes 3 parameters: the destination directory, the number of dirs to create and the number of files (with random contents) to created inside each of the created dirs. I ran it with 1000 dirs and 1000 files, so it generated 1M files set to work on.

But even with so many files, fdupes ran fine... At that point I realized that ulimit could be my friend, and the "-v" option would have saved me some time, but without the fun to write the script :)

If you don't know pp, here is a little explanation of the main part of the script (I forgot to comment the script well enough):
ParallelPython is more powerful than this: for examples, it allows to send your jobs to job nodes, machine dedicated to execute tasks (while you keep your own machine as the administration one), and more! Give it a try ;)

David Welton: Misquoted

Well, to be charitable, it was a bit late and so perhaps what I said came out wrong, but in this article: http://www.theregister.co.uk/2008/07/14/android_developer_unrest/ I'm quoted as saying the problem is with "upper management", which I don't really believe to be the case, going by snippets of conversations and things I've read. Frankly, at this point in time, I have no idea why Google can't talk about Android. Also, I had several other positive things to say to the reporter, but I guess the 'focus' of the piece was about the problems that Android is currently experiencing. Notwithstanding the recent weirdness, I'm quite happy that someone with a lot of money and muscle is going to be backing an open source mobile phone system, and hope that the current troubles are merely a small speed bump.

Ingo Juergensmann: No wanna-build access since DSA-1571 for m68k

Most people will know that it's hard for the m68k port to keep up with unstable. Mostly because the hardware is not the fastest anymore, but usually we could work around this problem by throwing more hardware onto it. But there are sometimes non-m68k problems that prevent the port from keeping up like, let's say, no wanna-build access anymore, because all ssh pubkeys have been revoked due to DSA-1571 (OpenSSL).
The problem was mentioned on debian-68k mailing list, starting a discussion about the implications for m68k.
Some weeks after the incidence, the problem still existed and there was some discussion again how to proceed and it was tried to get the keys in again. And luckily there was some progress.

But that didn't last long and finally there was yet another attempt to get wanna-build working again for m68k.
As of this writing, there wasn't any success in getting wanna-build access back and after 2 months since the DSA-1571 incident, m68k is not allowed to build packages from wanna-build, because somebody didn't feel like adding some ssh pubkeys.

Maybe that person is overloaded with other work or such, but this means that this person puts extra workload on other people that are scheduling packages on multiple buildds for about 2 months now, although there is other work to do for the involved porters than acting as a human wanna-build.

I'm very disappointed by those who have failed to update the wanna-build ACLs in a timely manner for this long. And I'm very thankful of everyone who tried to help and especially of Stephen Marenka who acted as a human wanna-build in the meanwhile!

Romain Beauxis: Soon come: OSS4 !

Thanks to the great work from, Sebastien Noel, the OSS4 package has made a great improvement ! An initial package has been commited to the SVN repository. It is not yet complete, but should work, provided you remove yourself the alsa modules (alsa force-unload, as root). I won't argue here about the sorry state of sound under linux, but you can read the links I already provided in the ITP for more details on this topic. Next to come: latest polishing, and then upload: yipee (...)

Next.

Previous.