It seems to me that the Asus EeePC (a $AU499 ultra-light laptop with only flash storage) would make a decent router. Often full desktop PCs are used as routers because they run the most common software and have standard interfaces. There have been dedicated router devices with flash for a long time, but without the ability to connect a standard monitor and keyboard they were always more difficult to manage than general purpose PCs. Also dedicated routers have limited RAM and storage which often does not permit running a standard OS. According to the best review I could find [1] EeePC has a minimum of 256M of RAM, a Celeron-M CPU (32bit Intel), and a minimum of 2G of flash storage. This hardware is more than adequate to run most server software that you might want to run (my current router/firewall/server has 192M of RAM). It could run a web server, a mail server, or any other general server stuff. It comes pre-loaded with a modified version of Debian so you get all the Debian software (which incidentally means more pre-packaged software than is available for any other distribution). Bigger versions are common, I believe that the $AU499 version has 512M of RAM and 4G of flash - I’m not sure that I could even obtain a lesser EeePC in Australia. The up-side of flash is that it doesn’t take much power as having a low power device in whatever confined space ends up housing your router is a good thing (the EeePC is listed as using less than 20W no matter what the load and idling at as little as 14W) and that it doesn’t tend to break when dropped or have any moving parts to wear out. The down-side of flash is that a sufficient number of writes will destroy it. Obviously swap is not a suitable use for a flash storage device. But a small mail server (suitable for the needs of a home or a small office) should be fine with it. Squid is commonly run on router devices, to run it on an EeePC I would be inclined to buy 1G USB flash device for the cache, then if Squid’s use destroyed the flash storage it would be easy to spend $20 and buy another. The EeePC has three USB ports and a built-in Ethernet port. I believe that the minimum number of Ethernet ports for a firewall is three, this means either one for the uplink, one for the DMZ, and one for your LAN, or two for uplinks (with a redundant uplink) and one for the LAN. The three USB ports allow using two USB Ethernet devices to provide the minimum three Ethernet ports and one for USB flash storage. One notable advantage of using a laptop as a server is the built-in UPS (the laptop battery). Many people have put old laptops into service as servers for this reason, but usually an old battery gives no more than about 30 minutes of power, while a new EeePC should be able to last for more than 3 hours without mains power. Using a second-hand laptop as a server is usually not viable in a corporate environment as laptops are all different. Repairing an old desktop PC is easy, repairing an old laptop is unreasonably difficult and often more expensive than replacing it. The low price of the EeePC makes it easily affordable (cheaper than some of the desktop machines that might be used for such a purpose) and the fact that it is purchased new at such a price means that you get warranty support etc. It seems to me that a significant disadvantage of using an EeePC (or anything other than a real server) for a server task is that it lacks ECC RAM [2], but as I’m not aware of any device sold for the purpose of running as a low-end router or sold at a price-point such that it could be used as a low-end router which has ECC RAM I guess that’s not a big disadvantage for that purpose. But the lack of ECC RAM and the lack of useful support for RAID does make it a little less suitable for use as a mail server. Finally if you are going to run a VPN then it would be handy to be able to secure the hardware against malicious activity when the office is closed. An EeePC will fit nicely in most safes… Please let me know what you think about this idea. I’ll probably start installing some such machines for clients in the near future if ASUS can keep up with the demand.

• [1] http://www.hothardware.com/articles/Asus_Eee_PC_Full_Retail_Review_Showcase/?page=1


• [2] http://etbe.coker.com.au/2007/07/15/desktop-machines-and-ecc-ram/

Share This

It’s quite convenient to have your GPG private key on your desktop, laptop and USB stick.. but if one of these is stolen or lost, you are pretty much obliged to issue a revocation. Now, RAID-5 has this wonderful property whereby it is impossible to recover data from an array of size n if you have (at most) n-2 elements. So, one idea would be to create a small loopback device -based array that you can spread around your nice stealable items - you then use your key by combining >= n-1 of them. ..Or Eve must steal n-1 items before she can reconstruct your secret key. You can recover the “missing data” from single lost device, obviously. There are almost certainly cooler algorithms for this, but none that are in the Linux kernel. Some scriptage that seems to work for me:

#!/bin/sh
set -eu
NUMITEMS=3
SIZE=30
create()  
	for NUM in $(seq $NUMITEMS);
	do
		dd if=/dev/zero of=$NUM.img bs=1M count=$(echo "$SIZE/($NUMITEMS-1)"   bc)
		losetup /dev/loop$NUM $NUM.img
	done
	sudo mdadm --create -l5 -n$NUMITEMS /dev/md0 $(seq -f "/dev/loop%g" $NUMITEMS)
	sudo mkfs.ext3 /dev/md0
 
stop()  
	sudo mdadm --stop /dev/md0
	for NUM in $(seq 1 $NUMITEMS);
	do
		sudo losetup -d /dev/loop$NUM   true
	done
 
start()  
	# Collect array elements from argv
	NUM=0
	for ELEM in $ELEMENTS;
	do
		NUM=$(( $NUM + 1 ))
		sudo losetup /dev/loop$NUM "$ELEM"
	done
	sudo mdadm --assemble --run /dev/md0 $(seq -f "/dev/loop%g" $NUM)
 
recreate()  
	# Assume already running
	dd if=/dev/zero of=$NUMITEMS.img bs=1M count=$(echo "$SIZE/($NUMITEMS-1)"   bc)
	losetup /dev/loop$NUMITEMS $NUMITEMS.img
	sudo mdadm --add /dev/md0 $NEW
	sudo mdadm --misc --wait /dev/md0
 

(This proof-of-concept script is deliberately broken: you’ll have to write the argument handling yourself and convince yourself you don’t have anything important at /dev/loop* or /dev/md0 or /. It might also make sense to only use the array in read-only mode, or you will have syncing issues.)
Ingenious learners may wish to construct other scenarios with other RAID levels; 5-device RAID-6 would only require 3 elements present to function (or to be stolen by Eve, naturally). Not that I’m actually doing this: it’s almost certainly as stupid as it sounds, I just haven’t thought of a convicing reason yet.

I have just uploaded javatools 0.5 to unstable and it is currently waiting in NEW. Anyone wishing to try it out earlier can find source and packages (it's arch: all) at http://www.srcf.ucam.org/~mjj29/javatools/ . Javatools replaces the existing jarwrapper package and also contains programs to help packagers in creating packages for Java programs and libraries. Packaging tools The javahelper package consists of several small programs which make packaging Java programs and libraries easier. They are generally designed to work in the same fashion as the debhelper programs, but start with the jh_ prefix. All of the programs have their command line arguments documented in manpages. jh_build Many Java programs and libraries are distributed without sane build systems. jh_build provides a simple interface for building Java source code into Jars, including setting the appropriate entries in the manifest. In almost all cases all that needs to be done to call jh_build is to set JAVA_HOME and CLASSPATH and then call jh_build with the name of the jar and the directory containing the source.

JAVA_HOME=/usr/lib/jvm/java-gcj
CLASSPATH=/usr/share/java/esd.jar:/usr/share/java/jsch.jar
jh_build weirdx.jar src
   

This command will compile all the Java files under src , set the classpath in the manifest and build it all into weirdx.jar. A couple of other options are worth mentioning. If this jar contains an application rather than a library then the -m or --main option can be used to set the Main-Class attribute in the manifest which will allow the resulting jar file to be be executed jh_build also provides a --clean parameter which should be called in the clean target of debian/rules . jh_libs For library packages Debian Java policy currently requires that the libraries be installed to /usr/share/java in a versioned format and with an unversioned symlink. jh_libs will take a jar and correctly install it. As with debhelper programs, this can either take a jar as a parameter, or read a list of jars from a file in the Debian directory. It also follows the -p , -i and -s semantics of debhelper for selecting which packages to install the jar to. When operating on a package, jh_libs will read the list of library jars from debian/package.jlibs or debian/jlibs . The jlibs file is a list of jars to install, one per line, and works exactly the same as listing them on the command line. Each jar is installed to debian/package/usr/share/java/ in the appropriate versioned and unversioned forms. jh_depends jh_depends works like dpkg-shlibdeps, but for jar files. For each jar in the package it takes the jars on which it depends and finds the packages to which they belong. These are included in the debhelper substvars as $ java:Depends . The control file can then just list that variable which is filled in automatically. This is done by reading the Class-Path attribute from the manifest of each jar. Jar files should include this attribute to prevent applications which use them from needing a full recursive classpath in their startup scripts and to prevent unneccessary transitions when the library changes its dependencies. If the package is not built with jh_build and the upstream build system doesn't set it correctly then jh_manifest can be used to fix this. If the application uses executable jars (see Runtime support below) then jh_depends will also add the appropriate depends on jarwrapper and the correct Java runtime. jh_manifest Many upstream build systems do not set the Class-Path attribute in the jars they create. This leads to several unwanted problems, such as expanding the classpath which applications have to use and introducing unneccessary transitions. They also may not set the Main-Class attribute. Both of these are required for running jars with the -jar parameter. jh_manifest can fix the manifest files of jars. It can either read from a manifest file in the Debian directory or run in a mode which updates all the jars with the CLASSPATH environment variable. The manifest files can either be debian/package.manifest or debian/manifest . The format of this file is a list of jars and indented below each one a list of manifest elements to set:

usr/share/weirdx/weirdx.jar:
 Main-Class: com.jcraft.weirdx.WeirdX
 Debian-Java-Home: /usr/lib/jvm/java-gcj
   

jh_exec The Runtime support section below describes running executable jars directly. jh_exec will scan package directories for jars in the paths, or symlinks to jar from the paths, and ensure that they have been set executable if necessary. jh_makepkg jh_makepkg will create template Debian packages for Java programs and libraries similar to dh-make . It should be run in the source directory and it will create the orig.tar.gz and most of the files in the Debian directory, which need only small changes neccessary to build the package. java-propose-classpath Some upstreams have complicated classpaths which may not be obvious to the packager when using jh_manifest to set the Class-Path attribute. java-propose-classpath will unpack a jar and look at the symbols imported to the class files, then scan all the jars in /usr/share/java . This shouldn't be run in the build since it is slow, and there may be ambiguities that the packager must resolve. It is still very useful for the packager as most of the time it will get it right automatically. Runtime support Javatools also provides some runtime support. Unlike compiled programs, or purely interpreted programs with hash-bang lines, Java programs cannot be directly executed. Many upstreams expect them to be run using java -jar jarname or java classname . This is not generally acceptible in systems which expect to just be able to run the command or launch it from a menu. As a result, many packagers are writing wrapper scripts which just call java with the correct classpath, jar and main class. jarwrapper There is an alternative to wrapper scripts, however. The binfmt_misc kernel module allows the kernel to call out to a program in userspace to execute specific types of file. jarwrapper registers itself as a handler for executable jars. This is done by reading values from the manifest file. In order for executable jars to work the following attributes must or may be defined in the manifest. These attributes can be set using jh_build and jh_manifest .

• Main-Class: The name of the class to be run when the application starts. (REQUIRED)
• Class-Path: The path to all the jar files on which this jar depends. (REQUIRED unless empty)
• Debian-Java-Home: A Debian-specific property if this application depends on a specific runtime. Specify the path to the runtime which should be used. (OPTIONAL)
• Debian-Java-Parameters: A Debian-specific property if this application needs extra options to the JVM. (OPTIONAL)

Putting it together This section shows the debian packaging generated by jh_makepkg for an application and a library using jh_build . Sample Library Packaging debian/control

Source: jsch
Section: libs
Priority: optional
Maintainer: Matthew Johnson 
Build-Depends: debhelper (>= 5), javahelper, java-gcj-compat-dev, libzlib-java
Standards-Version: 3.7.3
Homepage: http://www.jcraft.com/jsch/
Package: libjsch-java
Architecture: all
Depends: $ java:Depends , $ misc:Depends 
Description: Java secure channel
 JSch is a pure Java implementation of SSH2. JSch allows you to
 connect to an sshd server and use port forwarding, X11 forwarding,
 file transfer, etc., and you can integrate its functionality
 into your own Java programs. JSch is licensed under a BSD style
 license.
   

debian/rules

#!/usr/bin/make -f
export JAVA_HOME=/usr/lib/jvm/java-gcj
export CLASSPATH=/usr/share/java/zlib.jar
build: build-stamp
build-stamp:
	dh_testdir
	jh_build jsch.jar src
	touch $@
clean:
	dh_testdir
	dh_testroot
	jh_build --clean
	dh_clean
	rm -f build-stamp jsch.jar
install: build
	dh_testdir
	dh_testroot
	dh_clean -k
	dh_installdirs
binary-arch: build install
	# Java packages are arch: all, nothing to do here
binary-indep: build install
	# Create the package here
	dh_testdir
	dh_testroot
	dh_clean -k
	dh_install -i
	dh_installdocs -i
	dh_installchangelogs -i
	dh_javadoc -i --sourcedir=src 
	jh_libs -i
	jh_depends -i
	dh_compress -i
	dh_fixperms -i
	dh_installdeb -i
	dh_gencontrol -i
	dh_md5sums -i
	dh_builddeb -i
binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install
   

debian/libjsch-java.jlibs

jsch.jar
   

Sample Application Packaging debian/control

Source: salliere
Section: misc
Priority: optional
Maintainer: Matthew Johnson 
Build-Depends: debhelper (>= 5), java-gcj-compat-dev, fastjar, 
               libmatthew-debug-java, libcsv-java,
               libitext-java, javahelper
Standards-Version: 3.7.3
Package: salliere
Architecture: all
Depends: $ java:Depends , $ misc:Depends 
Description: Short Description
 Long Description
   

debian/rules

#!/usr/bin/make -f
export JAVA_HOME=/usr/lib/jvm/java-gcj
export CLASSPATH=/usr/share/java/csv.jar:/usr/share/java/debug-disable.jar:/usr/share/java/itext.jar
build: build-stamp
build-stamp:
   dh_testdir
   # Build the package
   jh_build salliere.jar src
   touch $@
clean:
   dh_testdir
   dh_testroot
   jh_build --clean
   dh_clean
   rm -f build-stamp salliere.jar
install: build
   dh_testdir
   dh_testroot
   dh_clean -k
   dh_installdirs
binary-arch: build install
   # Java packages are arch: all, nothing to do here
binary-indep: build install
   # Create the package here
   dh_testdir
   dh_testroot
   dh_clean -k
   dh_install -i
   dh_installdocs -i
   dh_installchangelogs -i
   jh_manifest -i
   dh_link -i
   jh_exec -i
   jh_depends -i
   dh_compress -i
   dh_fixperms -i
   dh_installdeb -i
   dh_gencontrol -i
   dh_md5sums -i
   dh_builddeb -i
binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install
   

debian/salliere.install

salliere.jar usr/share/salliere
   

debian/salliere.links

usr/share/salliere/salliere.jar usr/bin
   

In just over a month (1 month and 1 day, to be precise), it's FOSDEM again. The Debian Developers Room schedule is almost complete, and some interesting things are being published around it. Such as the pre-FOSDEM beer event. In previous years, this always happened at the "Le Roi d'Espagne", a bar at Grand Place in Brussels. This was a nice place for many years, because it's easily found, and they have this backroom where quite a lot of people would fit in. Unfortunately, "quite a lot" does not equal "a huge number", with the amount of people going to the pre-FOSDEM beer event more and more approaching the latter than the former as the years go by. Last year, it finally became too crowded, and it was decided that the pre-FOSDEM beer event would change bars this year. Which has now happened. This year, the pre-FOSDEM beer event will be at the Delirium Caf , which is not at the Grand Place anymore, but just 100m away from it; the FOSDEM website has more information. A nice feature of the Delirium Caf , besides the fact that they are much larger, is the huge amount of different beers they have. Over 2000 of them, which you can query online!. And that's not even considering the soft drinks or waters or whatever, which they also have on their menu. Another novelty this year is the streaming; the main tracks that will be held in Janson will be streamed out of the event, and the Debian video team is also planning to do some streaming. Meaning, even if you can't make it to FOSDEM, you'll still be able to follow some of it. You won't be able to follow everything, especially not the hallway track which at FOSDEM is a very important one; but at least you'll be able to sample some bits, which is nice. Other than that, not much will change. There'll be a key signing party, organized by yours truly. There'll be Lightning talks, there'll be the Main track, and there'll be a number of Developer rooms, including the Debian one—which, occasionally, is also organized by yours truly. This conference has always been my favourite (even though I haven't been to many conferences besides FOSDEM); I've never missed even one edition ever since the very first one back in 2001 (when it was still called OSDEM). And since a few years, I've also been offering crashing space at our office, for international geeks who don't mind roughing it a bit (it's an office, there no shower, there's only floor space). This year, perhaps I haven't been spamming enough for that, but for now I only have two people who're interested in sleeping over (and they're not even sure); if you're going to FOSDEM and still need a place to sleep, you're (probably ;-) welcome. Send me an email. On the Debian front, things are going well, for the most part. The list of speakers for the Devroom is nearing completion, leaving me with little more to do than to start assigning times. We've been assigned a booth as well, but there I still need to figure out how to organize it, and what to do with it. There will of course be the regular UK T-shirts, and probably some other merchandizing, but I also want something involving some computer device. We've had this d-i "babelbox" installation running a few times now, which was nice; but I do think we need some variation, too. The only problem with that approach is that I don't really know what that variation could be. Suggestions are welcome! And so time goes on, and FOSDEM draws nearer. At some point it'll eventually happen, and then it will be over before one can say "blueberry pie". Sometimes I wonder whether all these months of preparation are actually worth it. But when FOSDEM is actually here, I'm sure I'll find that it is, indeed, worth it...

As you might know from reading my blog, at my workplace, we have largely standardized on Linux on the desktop and laptop.

We use systemimager to maintain a standard desktop image and a separate standard laptop image. These images differ because there are different assumptions. The desktop machines mount /home over NFS, authenticate to LDAP, etc. This doesn't work on laptops. Moreover, desktops don't use network-manager or wifi, but laptops do.

Our desktop image uses Debian's hardware autodetection -- plus a little hacking in /etc/init.d/gdm -- to automatically adjust to a wide range of hardware. So far this has worked well.

Laptops are much more picky. Our standard laptop model had been the HP nc4400 -- a small and light 12" model that people here loved. HP discontinued that model. Their replacement was the 2510p. We ordered one in here for evaluation. Try as we might, we couldn't get it to suspend and resume properly in Linux.

So I went out scouring the field of Linux laptops. Companies such as Emperor Linux buy retail laptops from people like Lenovo, test them for Linux, and sell them -- at a premium. These were too expensive to justify at the quantities we need them.

Then I stumbled across Linux Certified. I'd never heard of them before. I called them up and asked a few questions. They don't buy retail laptops, but instead have OEMs in Taiwan build laptops to their spec. They happen to use the same OEM that Fujitsu does, I believe. (No big company builds laptops in the USA these days). I asked them about wifi chipsets, video chipsets, whether they use stock kernels. I got clueful answers to all of these.

So we ordered one of their LC2100s models. They didn't offer Debian preinstalled, but did offer Ubuntu, so I selected that. The laptop arrived a couple of days (!!) later, configured with the particular CPU, etc. that I selected.

I was surprised at the thrill I felt at taking a brand new laptop out of its box, turning it on, and watching Grub appear before my eyes. Ubuntu proceeded to boot. I then of course installed our regular Debian image on the thing to check it out.

It needed a kernel and xserver-xorg-video-intel from lenny, as well as the ipw3945 driver for wifi, but otherwise worked with the exact same software as our HP nc4400 image. (In fact, it wasn't hard to support both laptops with that image, since both use a lot of Intel hardware.) The one trick was making hibernate call /etc/init.d/ipw3945d stop so that the ipw3945 module could be unloaded before suspend. (Why this particular chipset needs a daemon is beyond me, but oh well.)

The hardware is great. As far as I know, the ipw3945 was the only component that wasn't directly and automatically supported by DFSG-free software in lenny main. The screen is sharp and high-contrast (it's glossy, which I personally don't like, but I bet our users will). The device itself feels sturdy. It's small and dense. I haven't opened it up, but it looks like all you need is a screwdriver to do so.

The only downside is that they don't sell docking stations for it. Their standard answer on that is to buy a USB docking station. That's a partial answer, but can't handle power or video like a standard docking station will.

Also, the LC2100s is much cheaper than the HP laptop, even when configured when nicer specs in every way. That is no doubt partially due to the lack of the Windows tax.

I'm sending off an order for 4 more today, I believe.

Julien Goodwin asks whether an insecure platform can perform secure computation [1]. My immediate reaction was to recall Charles Babbage’s quote On two occasions I have been asked, ”Pray, Mr. Babbage, if you put into the machine wrong figures, will the right answers come out?” […] I am not able rightly to comprehend the kind of confusion of ideas that could provoke such a question [2]. However on careful reading of Julien’s post it seems that he is most interested in the integrity of the computations rather than the secrecy. He suggests the possibility of performing the computation twice and comparing the results. Of course the issue to consider is whether both computations could be subverted. It seems most likely that if you are using someone else’s computation cluster for the calculations then performing the same calculation on two nodes of that cluster will give the same result both times (whether it’s right or wrong). If there was a computation that would get a result that can be verified with little computation then it would be an easy problem to solve. For example if I wanted to brute-force a passphrase for a GPG key then I could try all combinations that were known to be possible, if one was flagged as correct then in a millisecond I could verify it. If none of the possibilities were listed as correct then I could assume that the process was broken in some way. The problem with this is that such a passphrase can have arbitrary length (I know someone who uses more than 50 characters). So if I used a brute-force attack on passwords of up to 9 characters that doesn’t exclude a 10 character password. Probably the best potential use for insecure systems is for analysing large data sets. There have been several projects to harness unused computation resources to perform various large calculations (protein folding and SETI are two examples). Most such projects use closed-source programs because the people who run the contests are afraid of cheats who modify their programs to merely say “no” repeatedly and quickly. Of course this wouldn’t be a problem if they didn’t have a high-score table, and disassembling the program to hack the protocol can’t be that difficult (consider the work invested in reverse engineering protocols such as SMB which are much more complex). It would probably be reasonably to randomly send batches of work to two machines in different regions for such large-scale public computation projects. Finally if you want to perform calculations on secret data on someone else’s hardware then you may have lost before you even start.

• [1] http://laptop006.livejournal.com/39799.html


• [2] http://en.wikipedia.org/wiki/Garbage_In,_Garbage_Out

Share This

Hit Alt+F2, type notepad, hit enter. An editor window pops up. Something is very strange, though ... until I realize that KDE has caught my Alt+F2, so that the “Run Command” box I was typing notepad into was not that of the Windows session on the terminal connection but the one of my local KDE. And since I've installed Wine some time ago, there actually is a text editor called notepad on my local computer which closely resembles the one from windows. And the whole thing because apparently Copy and Paste doesn't work from my local desktop to a (Citrix based) terminal session. (Hmm. Is Alt+F2 even the correct key combination for Windozes? Update: Several people have pointed out that it's Start+R in Windows. Thanks, will have to try if that's put through to the terminal session correctly, then.)

For the time being offline I've been doing a lot of things, and some of them involve free software of course. I'm glad to announce that this march Peru will be heading the direction from its current status-quo to, what we expect, is the first step into a real and sustainable ecosystem where our talented people (from academy, and others) get their hands dirty into to real contribution to free software projects. involucrate.org has born as a project focused on building an environment to foster a real free software community focused on technical contribution and making our country have a larger spot on the free software contributors world-map. The lack of appropiate models and the inhability to stablish a link between the real actors on such scenary have led to a poor involvement and groups atomization for "ideological" or political means, making room for "religionization" of a very technical and licensing model matter where debate over technical aspects have gone 0. Our manifesto (in Spanish) explains our vision and mission, and also how we expect to achieve such a challenging goal. Is in our will to link our academic people, who was somehow behind the walls (a luxury for a country like mine), and the other actors here and globally. We want our talented people to see globally, and offer our life-experience on the field to make them aware and show them the opportunities that they can have and how other people near us who are making it right!. This time, thanks to the wonderful guys at GNOME Foundation, we are having our very first international conference called involucrate+GOME focused on free software development and, as we expect to be, be the first step of a series of world-class events where we expect to set a yearly world-known free software event here in Peru. Something we dodn't have after more than 10 years since the first group of people gathered together to discuss which is the best distro or something like that and the discussion is still ongoing. As noted the conference will be focused mostly, well almost 90%, in GNOME, but we expect to have more editions dedicated to one or more projects. So, I invite you to check our program and our cool speakers, all from south america and all contributing on GNOME. Of course you are invited to attend to, if you happen to like us! Bring your questions and contributions to this initiative to both our project web or DebianPeru web who is coordinating this initiative, I mean this is almost a debianite sub-project ;) I want to say as a side-note, that despite what media has made people think, we are making a real cool relationship with the chilean community. Expect to hear from us soon, and not because we've buying more wine from Chile and they are importing real pisco from Peru, or because we'll mimic our presidents. I really like this time, it comes 10 years late, however!

This is not about any particular project, but more a generic thought. When should be something considered to be stable enough to be released as 1.0? Over ages I started several projects which are in different quality right now and this is maybe not completely related to version they use. Let's take one of older ones - Wammu. It was started long time ago, it really does not get any major code changes for several years and I still don't want to make 1.0 release there. The reason is that I think that many things could be done better there. However there are quite lot of users which use it and they probably consider it stable enough :-). But they will have to live with 0.x versions as I do not plan 1.0 at all for now even if it maybe deserves it :-). Different case is Ukolovnik. It does not have tons of features, but it's enough for me and it will be 1.0 soon. I have features to add, but I don't thing that RPC interface has to be in 1.0, it can be just thing added later.

A phone call in December made me very proud: A colleague I met thanks to the Espora collective told me she was involved in the Mexican activities for this year's World Social Forum (FSM Mexico 2008 site). The Mexican activities? Yes. This year, the World Social Forum will not be held at one -or several- distinct places, but it will happen globally. There will be activities in tens of countries. The activity program for Mexico (full PDF version) is quite loaded - And I was invited to give one of the talks, this Friday (Jan 25) at 12:00, about Free Software for a Free Society, in the Foro Derecho a la Comunicaci n track.
I am very honored by this invitation! I just spent a couple of hours organizing/going through the topics I will be presenting. I hope to be able to be at some other of the forum's activities, as it just is too important and interesting to miss out!

Joey, just don't delay your releases waiting for incoming translations. Gettext is anyway smart enough to not use translations when they're non-existing (aha) of fuzzy. So, an incomplete translation for a program will just end up in a partially translated program. That's actually the case for *many* localized software, including the big ones. I suggest that you apply such a schedule:

• Plan a release
• Send call for translations (hint: podebconf-report-po is your friend even for non debconf translations...see its man page) and give translators a deadline. The deadline has to be reasonable and leave some room for translation proofreading. Most often, when few strings are impacted (say not more than 20 but, again, that's hard to judge)
• When the deadline is reached, upload release with what you have
• A few days weeks later, eventually release a new version with late translations

But, as you suspected, releasing without synchronised translations is the better choice....as long as you care abou tsending call for updates when needed. BTW, if you need some help to coordinate incoming translations for apt-key, maybe ask on debian-i18n and someone will eventually pop up (hopefully, not /me).

One year ago today, I wrote that we had moved onto the farm on Jan. 20. That was quite the day: 7.5" of snow, and windy.

When we moved in, our kitchen didn't yet have its flooring or any appliances. We had a microwave sitting on a 5-gallon bucket and a borrowed dorm fridge for the "kitchen". There were other little things being finished up, too. Of course, "moving in" doesn't just happen in an afternoon either. We are still sorting through boxes from time to time, cleaning up stuff in the elevator (some of which was grandpa's), and punching down the last few network runs.

Before we moved in, we spent three months in a drafty basement apartment. Our previous house had sold, and the farmhouse wasn't ready to move into yet. And we moved out of that other house about 3 weeks after Jacob was born.

It was a busy, exhausting time. But we're so glad we did it. Jacob's room is much closer to ours, which is quite helpful. He loves to scoot around on the wood floors. Terah bought him a large pillow, and he likes it when I give him pillow rides around the house.

Older people that knew my grandparents love to drop by, too. For awhile after we moved in, we'd have people just drive on the yard to see what it looks like now. The person who pruned our trees hinted that he was curious what the inside of the house looked like, so I showed him. He grew up Amish, and said, "wow, this would be a perfect Amish house!" I guess the Amish could remove the network jacks.

We have some neighbors a mile away. They're two sisters living on their parents' farm. I think they're in their 70s or 80s. They drive whatever car their dad bought before he died 20 or 30 years ago. Last month, one of them gave me a call. I've been collecting photos for the upcoming church centennial, and she had some that she thought I might be interested in. It was snowy and cold, so I said I'd be happy to go over and look at them sometime. That wasn't quite her plan. "Oh, that's no trouble. I like to get out, and you're not far away." She brought over some wonderful photos (which I scanned), and also got to see the inside of the house for the first time in years.

That's how things go out there. Last June, we had some tourists drop by. It's been a lot of fun to be part of this community again.

Before long, Jacob is going to love playing in the elevator and walking down to the creek. Maybe he'll like making a snowman next winter, or riding a bicycle up and down the driveway someday. It will be fun to see.

I just read an interesting approach to finding a life partner [1]. A summary is “There is a sad truth to the world today. I am part of a dying breed of people known as “shell users.” … Because there are fewer and fewer of us, I must help keep our lineage alive. I am looking for someone to help me do this. I need a woman (obviously) who is willing to raise a child with me in the method of Unix.“. While there is a moderate amount of humour in the post (I recommend that you read it in full) it is a genuine attempt to find a partner. One thing that has occurred to me is that part of the cause of the attitude toward women that is sometimes demonstrated in my community is the fact that there are so many guys who are single and have been single for a long time. If this problem was alleviated then I believe that some of the other social issues would be significantly improved. The advert in question is a bit more courageous than most guys would be prepared to consider (it’s up there with the guy who paid for a giant sign to be installed beside a highway). But there are many other options. ESR has some advice to offer [2], but the name of the URL (sextips) seems an accurate representation of the focus of the pages. One problem with ESR’s advice is that it seems to assume an ability to be extroverted (or at least fake it) which is greater than many geeks possess. Another problem is that he assumes that geeks are inherently more intelligent than average people - there is more than adequate evidence to disprove this theory. It seems more reasonable to only assume that geeks are better than average at doing geeky things. It seems to me that the one thing that geeks really are better at is writing email! Therefore it seems logical that geeks who want good success in meeting women should try and involve the use of email in some way. Singles web sites seem an obvious way to take advantage of this. Unfortunately there is a strange cultural aversion to using such web sites which even afflicts geeks. For some reason it’s thought to be a good idea to try and meet a life partner in a place where there is inadequate light, too much background noise to talk properly, and where everyone has taken mind-altering chemicals (I am referring to drinking alcohol at a bar of night-club). Once strange cultural ideas are discarded it seems obvious that if you want to meet a potential life-partner then you should do so in a place where there is good light, an opportunity to talk, and where everyone is in a normal state of mind. Starting out with email and then talking over the phone and exchanging JPEG pictures seems to be a sensible option in this regard. Most times that you chat to someone you meet over the net it won’t go any further than email or maybe phone-calls. But that’s still entertaining and useful practice at communicating with women. One thing that the Craig’s List advertiser really got right is that he knows what he wants. An advantage of the singles sites on the net is that they often force people to make decisions. When a singles site demands that you enter a desired number of children that you want to have (with 0 being an acceptable answer) then you will be forced to consider the issue and make a decision. While being prepared to negotiate about such things may be desirable, I can’t imagine anyone finding it appealing when someone doesn’t know what they want or doesn’t have the confidence to say it. Finally don’t rule out the possibility of meeting someone through your local LUG. There are a quite a few married couples who met through the Linux community. But don’t go making “pick-up” attempts on women in the community - the result will not be positive. Via Michael Still.

• [1] http://www.craigslist.org/about/best/nyc/485967082.html


• [2] http://catb.org/~esr/writings/sextips/

Share This

Things have been rather hectic lately, so I haven't found much time to blog. Here's why: DBE62 The Gigabit Ethernet version of our thin client took more time to produce than I expected, for a number of reasons mostly related to a few improvements we decided to squeeze into the design at the last minute. However, today, we finally reached a point where LinuxBIOS runs as well as it did on our previous DBE61 model and where we no longer need any DOS tool to flash the MAC address into the VIA velocity Gigabit chip we selected. Hurray! Production will only commence in one month, but I'm already excited by the new model's potential, both as a thin client and as an embedded platform. Another good thing is that, thanks to Ubuntu developer Scott Balneaves, we managed to get all the necessary tools to support thin clients based on LinuxBIOS into LTSP, so our Etherboot model works out of the box on Ubuntu, since Gutsy. Hurray! There is one remaining issue related to recent changes in X.org core functionalities that make the AMD driver we need unstable but, again, various AMD, Debian and Ubuntu developers are looking into fixing this, so we should soon have spotless Geode support into Debian and Ubuntu again. T rkiye I visited Turkey twice over the last few months, because I'm putting together a pilot project to better promote the Estonian high-tech sector abroad, in collaboration with the Estonian government. I have to say that the more I visit Turkey, the more I like the place and the more understand why these people see themselves as Europeans because, you know what? They are: practically every significant civilization and religion that is at the core of European culture had major events taking place in in Anatolia or Thrace and, also, a devastatingly huge percentage of the consumer goods sold in Europe are designed and manufactured in Turkey. Learning the rudiments of Turkish has also proven to be a lot of fun. While I'm nowhere near as fluent in Turkish as in Finnish or even in Estonian, the learning curve isn't as steep as I initially expected: Altaic and Ugric languages share a surprising amount of grammatical concepts, while Turkish itself borrowed a lot of vocabulary from French, because the founder of modern Turkey, Atat rk, was very fond of the language. I'll venture that proximity with nearby Middle-Eastern countries that were formerly under French influence has something to do with it too. Identity crisis To me, the most challenging part of these business missions abroad is to represent a whole economic sector from a country of which I'm not a citizen or even a resident. Case in point: Being invited to dinner by a Turkish investor, I noticed the waiter asking my host where his foreign guest might be from. A few minutes later, as the waiter put down a gigantic pita bread with the word "Estonia" spelled in roasted sesame seeds, my host asked, reading my business card:

• Actually, your name doesn't sound Estonian. France?
• Qu bec.
• And your mobile number ... 358 ... is that Finland?
• Yup. I've been living there for the past 10 years.
• Ah! So you don't live in Tallinn?
• Nope. Helsinki.

Looking at the waiter and pointing at the gigantic pita, he continues:

• Actually, make that Canada ... no, Finland ... Ah, sorry, never mind. Just keep it as Estonia.

Honestly, trying to keep a straight face while saying "We" about a country of which I'm not a citizen and where I don't even reside becomes unbearable. At some point, some European bureaucrats will have to admit that I need a new citizenship, to reduce the confusion and to let me find myself a proper national identity again; the sooner, the better. Besides, the absurdity of the situation keeps on jumping at everyone's face: during the second mission to Turkey, I kept on bumping into Finnish diplomats who took personal offense at me for living in their country and yet representing the interests of a competing, neighboring country. If you ask me, I cannot entirely blame them for it. However, as far as I'm concerned, I've done my homeworks: I've been here 10 years, I speak the language and I don't have a criminal record. Given this, you'd think that acquiring citizenship would be a mere formality, but the Ulkomaalaisvirasto doesn't see it that way. If you ask me, this country's very first Minister of Immigration, Mrs.Astrid Thors, ought to unilaterally grant citizenship to anyone who's lived here for at least 5 years, just for the asking, regardless of what circumstances brought them here or of what absurd decisions the Ulkomaalaisvirasto might have previously made on their residence permit status. Doing this would go a long way towards undoing the mess of her predecessors at the Ministry of Interior and it would speak volumes about how much Finnish society has evolved from the days when any foreigner was a commie they had to push over the Eastern border.

Sadly, I can't seem to get things right re: Fosdem. I got the dates wrong for Fosdem and had to pay extra to change the bookings. Last year I got the flight wrong and had to pay extra to fly from Gatwick instead of Heathrow (and when I got to Brussels there was some bomb alert that had closed the airport, just to make things worse).
I will now be in Fosdem, on time but poorer than necessary.
I can't get to London in time to take the same Eurostar as many others and there isn't time get back home with the Sunday evening train so I'm staying until Monday morning.
Things are so much easier when public transport isn't involved.
Bah - there's always next year to get things right.

Here's a handy incantation I use with the Intel X.org graphics driver on my laptop.

Put this script somewhere convenient:

#!/bin/sh
if xrandr   grep '^VGA connected' >/dev/null
then
    #echo "VGA connected"
    xrandr --output VGA --above LVDS --auto
    xrandr --output LVDS --auto
else
    #echo "VGA not connected"
    xrandr --auto
fi 2>&1   logger -t xrandr-hotkey

and bind it to your "switch video mode" key, e.g. Fn+F7 on my Thinkpad X60s. For instance, I run xbindkeys, so I saved it as autoxrandr and put this in ~/xbindkeysrc:

"exec /home/smcv/bin/autoxrandr"
    XF86Display

Now if you press the "switch video mode" key with a monitor plugged in, you'll get the external monitor appearing above the laptop panel (my preferred configuration - I've balanced my monitor on an N800 box to get the bottom of the screen level with the top of my laptop's screen). If you press that key again after unplugging the VGA cable, the laptop will turn off the VGA output and pull all the windows onto the built-in screen.

The bad thing with fixing build failures with dash is that there are still a lot of open bugs. (Remember, the 0-day NMU policy applies to those, so it’s a good opportunity to improve your NMU karma. And I will sponsor your NMUs if you can’t upload!). The good thing is that you sometimes run into funny code, like:
clean:
    dh_testdir
    dh_testroot
    pushd docs ; $(MAKE) distclean true ; popd Since pushd/popd is a bashism, the Ubuntu patch changed this to:
clean:
    dh_testdir
    dh_testroot
    cd docs ; $(MAKE) distclean true ; cd $(CURDIR) Which works, but is … interesting? :-)

I have decided to run a contest for security related blog posts that appear on Planet Linux Conf Au [1]. That Planet is for people who are attending Linux Conf Au [2], and the prize (or prizes) will be given out at the conference. The aim will be posts on the topic of computer security from people who are not experts. Anyone who has been employed as a security consultant or developer of security software or who has spoken at a conference such as LCA on a topic related to security can enter but will only be eligible for an honourable mention. Any such expert who enters for an honourable mention MUST note on their entry that they are not eligible for a prize to avoid any possible confusion. Only blog posts of a positive nature will be well regarded by the judges. Negative reviews are only acceptable if they have positive suggestions for improvement and/or bug reports linked from them. You may submit a series of posts on a theme, and multiple posts on different security issues will help an entry - we will judge the contributions of the person not a single post. The prize pool is currently $50, which I hope to expand - but such expansion depends in part on the quality and quantity of early entries, so if some good entries are submitted soon then there will be more and bigger prizes. Currently the prize pool comes from the pockets of me and Casey, commercial sponsorship will be accepted and may increase the prize pool significantly. The duration of the contest is from this moment until at least lunch-time on Friday the 1st of February. We may extend the contest until Friday night and announce the winner(s) on Saturday - but at this time you should not count on such an extension and plan to have your entry or entries in by mid-day on Friday the 1st of Feb (Australian eastern daylight savings time). So far of the people I have invited to join the judging panel only Casey Schaufler has accepted. Casey and I will consider offers to assist in judging from people who have a combination of security and blogging experience that is significant, but note that as of this time all prize money comes from the judges… When you write a post that you wish to submit for the contest please comment on this post with the URL to make sure that the judges don’t miss it. Entries submitted on the last day may need some other form of notification, I will write a future post which clarifies this issue. Some issues related to selecting the winners have yet to be determined, I will write future posts with more information. But please don’t hesitate to enter now, well written posts that have a positive tone are what you need. Also entering quickly will help increase the prize pool, more prizes means a greater chance that you will win one! One thing I am considering is how to manage commercial sponsorship if it is offered. One possibility I am considering is allowing a sponsor to declare that half of the money they pay will be used as prizes for entries that relate to their product. That would give an extra incentive for people to blog about topics related to the sponsor but still give extra prize money for other topics. In that situation the relation between the sponsor’s product and the prize winning entry or entries would be liberal, so a post about standard Unix security features would be eligible for prize money from any commercial Linux distribution. Finally you must have your own individual blog to enter the contest. Guest-posts on other people’s blogs or group efforts are not eligible for anything other than an honourable mention.

• [1] http://planet.linux.org.au/lca2008.html


• [2] http://linux.conf.au/

Share This