Search Results: "ed"

10 September 2014

Lucas Nussbaum: Will the packages you rely on be part of Debian Jessie?

The start of the jessie freeze is quickly approaching, so now is a good time to ensure that packages you rely on will the part of the upcoming release. Thanks to automated removals, the number of release critical bugs has been kept low, but this was achieved by removing many packages from jessie: 841 packages from unstable are not part of jessie, and won t be part of the release if things don t change. It is actually simple to check if you have packages installed locally that are part of those 841 packages:
  1. apt-get install how-can-i-help (available in backports if you don t use testing or unstable)
  2. how-can-i-help --old
  3. Look at packages listed under Packages removed from Debian testing and Packages going to be removed from Debian testing
Then, please fix all the bugs :-) Seriously, not all RC bugs are hard to fix. A good starting point to understand why a package is not part of jessie is tracker.d.o. On my laptop, the two packages that are not part of jessie are the geeqie image viewer (which looks likely to be fixed in time), and josm, the OpenStreetMap editor, due to three RC bugs. It seems much harder to fix If you fix it in time for jessie, I ll offer you a $drink!

Steve Kemp: kvm-hosting will be ceasing, soon.

Seven years ago I wanted to move on from the small virtual machine I had to a larger one. Looking at the the options available it seemed the best approach was to rent a big host, and divide it up into virtual machines myself. Renting a machine with 8Gb of RAM and 500Gb of disk-space, then dividing that into eights would give a decent spec and assuming that I found enough users to pay for the other slots/shares it would be economically viable too. After a few weeks I took the plunge, advertised here, and found users. I had six users: There were some niggles, one user seemed to suffer from connectivity problems more than the others, but on the whole the experiment worked out well. These days, thanks to BigV, Digital Ocean, and all the new-comers there is less need for this kind of thing so last December I announced that the service would cease - and gave all current users 1 year of free service to give them time to migrate away. The service was due to terminate in December, but triggered by some upcoming downtime where our host would have been moved, in the back of a van, from Manchester to York, I've taken the decision to stop it early. It was a fun experiment, it provided me with low cost hosting (subsidized by the other paying users), and provided some other people with hosting of their own that was setup nicely. The only outstanding question is what to do with the domain-names? I could let them expire, I could try to sell them, or I could donate them to other people running hosting setups. If anybody reading this has a use for kvm-hosting.org, kvm-hosting.net, or kvm-hosting.com, then do feel free to get in touch. No promises, obviously, but it'd be a shame for them to end up hosting adverts in a year or twos time..

Raphaël Hertzog: Freexian s first report about Debian Long Term Support

When we setup Freexian s offer to bring together funding from multiple companies in order to sponsor the work of multiple developers on Debian LTS, one of the rules that I imposed is that all paid contributors must provide a public monthly report of their paid work. While the LTS project officially started in June, the first month where contributors were actually paid has been July. Freexian sponsored Thorsten Alteholz and Holger Levsen for 10.5 hours each in July and for 16.5 hours each in August. Here are their reports: It s worth noting that Freexian sponsored Holger s work to fix the security tracker to support squeeze-lts. It s my belief that using the money of our sponsors to make it easier for everybody to contribute to Debian LTS is money well spent. As evidenced by the progress bar on Freexian s offer page, we have not yet reached our minimal goal of funding the equivalent of a half-time position. And it shows in the results, the dla-needed.txt still shows around 30 open issues. This is slightly better than the state two months ago but we can improve a lot on the average time to push out a security update To have an idea of the relative importance of the contributions of the paid developers, I counted the number of uploads made by Thorsten and Holger since July: of 40 updates, they took care of 19 of them, so about the half. I also looked at the other contributors: Rapha l Geissert stands out with 9 updates (I believe that he is contracted by lectricit de France for doing this) and most of the other contributors look like regular Debian maintainers taking care of their own packages (Paul Gevers with cacti, Christoph Berg with postgresql, Peter Palfrader with tor, Didier Raboud with cups, Kurt Roeckx with openssl, Balint Reczey with wireshark) except Matt Palmer and Luciano Bello who (likely) are benevolent members of the LTS team. There are multiple things to learn here:
  1. Paid contributors already handle almost 70% of the updates. Counting only on volunteers would not have worked.
  2. Quite a few companies that promised help (and got mentioned in the press release) have not delivered the promised help yet (neither through Freexian nor directly).
Last but not least, this project wouldn t exist without the support of multiple companies and organizations. Many thanks to them: Hopefully this list will expand over time! Any help to reach out to new companies and organizations is more than welcome.

One comment Liked this article? Click here. My blog is Flattr-enabled.

Petter Reinholdtsen: Good bye subkeys.pgp.net, welcome pool.sks-keyservers.net

Yesterday, I had the pleasure of attending a talk with the Norwegian Unix User Group about the OpenPGP keyserver pool sks-keyservers.net, and was very happy to learn that there is a large set of publicly available key servers to use when looking for peoples public key. So far I have used subkeys.pgp.net, and some times wwwkeys.nl.pgp.net when the former were misbehaving, but those days are ended. The servers I have used up until yesterday have been slow and some times unavailable. I hope those problems are gone now. Behind the round robin DNS entry of the sks-keyservers.net service there is a pool of more than 100 keyservers which are checked every day to ensure they are well connected and up to date. It must be better than what I have used so far. :) Yesterdays speaker told me that the service is the default keyserver provided by the default configuration in GnuPG, but this do not seem to be used in Debian. Perhaps it should? Anyway, I've updated my ~/.gnupg/options file to now include this line: 
keyserver pool.sks-keyservers.net
With GnuPG version 2 one can also locate the keyserver using SRV entries in DNS. Just for fun, I did just that at work, so now every user of GnuPG at the University of Oslo should find a OpenGPG keyserver automatically should their need it: 
% host -t srv _pgpkey-http._tcp.uio.no
_pgpkey-http._tcp.uio.no has SRV record 0 100 11371 pool.sks-keyservers.net.
%
Now if only the HKP lookup protocol supported finding signature paths, I would be very happy. It can look up a given key or search for a user ID, but I normally do not want that, but to find a trust path from my key to another key. Given a user ID or key ID, I would like to find (and download) the keys representing a signature path from my key to the key in question, to be able to get a trust path between the two keys. This is as far as I can tell not possible today. Perhaps something for a future version of the protocol?

Ian Donnelly: New Release: Elektra 0.8.8

Hi Everybody! Great news! I am very happy to announce that we have reached a new milestone for Elektra and released a new version, 0.8.8! This release comes right on the tail of the 0.8.7 release and it might just be our biggest release yet! We already have a great article covering all the changes from the previous release on our News documentation on GitHub. I just wanted to focus on a few of those changes on this blog, especially the ones that pertain to my Google Summer of Code Project. First of all, Felix has worked to greatly improve the ini plug-in. This is the plug-in I used in my technical demo for mounting Samba s smb.conf file. It now works even better with complex ini files such as smb.conf which means the automatic merging of files like smb.conf is even better now! That really goes to show one of the greatest strengths of the design of Elektra. Just by improving plug-ins, all the functions of Elektra can improve as well. The merge code was not changed in this release, yet because of an updated plug-in, the merge has improved. Secondly, there have been some good improvements to the kdb command-line tool. Many of these improvements were used in my technical demo, but now they are actually a part of release (and a little more refined from then). We added a new command called kdb remount which allows a user (or script) to mount a file to the Elektra Key Database using an existing backend. An example of this command is:
kdb remount [new filename] [new path] [existing mountpoint]
This command mounts the new file to the new path in the Key Database using an existing backend. This works with the conffile merging by allowing us to mount the various versions of the conffile without having to specify which backend to use (it will use the same backend as the currently used conffile). Additionally, the umount command was updated to allow users to umount using the current mountpath (allowing commands such as kdb umount system/smb.conf) as opposed to backends. Moreover, we added an option to the kdb import command to specify a merge strategy using thing -s option. Now you can import a file into the Key Database and merge the content of that file with the current Keys in the Database. Thirdly, we added some new scripts to Elektra to help with the ucf integration. These scripts were used in my technical demo, but now they are part of the release. elektra-mount and elektra-umount are wrappers for the commands kdb mount and kdb umount respectively. They are designed to be used in debian package scripts and are adapted for easier use than the generic commands. For instance, running elektra-mount will check to see if a file is already mounted at that location in the Key Database. Similarly, elektra-umount will not produce an error if the file was already unmounted. This is because maintainer scripts can be run multiple times in a row and producing an error will stop dpkg even when it shouldn t. Additionally, we added a script called elektra-merge which can be used as a method for ucf to merge configuration files. This script acts as a liaison between ucf and elektra allowing automatic merges to be done by ucf using Elektra s merge features in a seamless manner. For information of how these scripts work, check out my tutorial on integrating elektra-merge into a debian package. The last bit of news I would like to share is the great progress of the Debian package. Thanks to Pino Toscano, version 0.8.7-4 of Elektra is now available in the Debian testing repo! This is great news as we are now that much closer to replacing the outdated Elektra 0.7 versions that are currently the latest versions of Elektra in the stable repo. Once the 0.8.X versions of Elektra make it to stable it will be much easier for us to keep the latest versions of Elektra in Debian, and that s key to allowing Elektra to help improve users lives. You can download the release from:
http://www.markus-raab.org/ftp/elektra/releases/elektra-0.8.8.tar.gz size: 1644441
md5sum: fe11c6704b0032bdde2d0c8fa5e1c7e3
sha1: 16e43c63cd6d62b9fce82cb0a33288c390e39d12
sha256: ae75873966f4b5b5300ef5e5de5816542af50f35809f602847136a8cb21104e2 And the API-Documentation can be found here: http://doc.libelektra.org/api/0.8.8/html/ Hope you enjoy the new release! Sincerely,
Ian S. Donnelly

9 September 2014

Holger Levsen: 20140909-lts-august-2014

Debian LTS - feedback about the feedback from my LTS talk at DebConf14 So, I'm more or less back from dc14 and today, five days later, I think I might have mostly overcome jetlag. Probably... So, at DebConf14 I gave a talk about LTS and while I'm sorry that I was that tired, I'm more or less happy how the talk went. Thankfully at least I was calm and relaxed... There are a couple of things I learned from the talk: a.) LTS has been really really perceived well b.) it fits a demand c.) people already take it for granted (eg plan for Wheezy LTS) d.) people expect the same non-intrusive changes as currently done for security updates. To explain the last point: when I explained the - so far - rather theoretical problem that ''squeeze-lts'' has no gatekeeper mechanisms whatsoever (eg no ''proposed-updates'', no NEW queue..) the reaction in the audience was basically "something like this should exist, else how can we deploy this in large scale / on important setup?!". Also currently there is no, well-documented, easily to be found policy for what kind of updates are acceptable. I said that we basically follow the same rules as there are for debian-security updates, but this should really be documented properly. This doesn't seem very hard to fix, just like many things it "just" needs someone to do the work. IOW: we explain how to use LTS, we explain how to contribute to LTS (through uploads or financially) but we lack a simple explaination what LTS is and what kind of updates to expect. It's kinda self evident, but only kinda. So since giving the talk I changed one thing in my personal usage of LTS: I don't use my personal LTS repo anymore, where I made sure only good packages got in. This is for two reasons: a.) I had too add new packages too often and b.) if it really is a problem that LTS has no gatekeeping mechanism (which I'm not sure anymore it is, after all, the updates are prepared by reasonable people with a common goal...) then I want to suffer this first hand, so I can build solutions which benefit everyone, not just me. That personal LTS repo only helped me. On the technical side I prepared five DLAs, for lzo2, libwpd, squid3, lua5.1 and bind9. Not much to see here, they all were very smooth. I still enjoyed the challenge of digging in unknown sourcecode, as described in my previous post. Then more interestingly, and with the help of Raphael Geissert and Salvatore Bonaccorso I fixed the security-tracker to also know about oldstable, after waiting for more than 8 weeks to someone else doing it. I'm very glad that this is done now, as without it was really tedious to check which issues were applying to oldstable. Oh, and another afterthought from giving the talk: currently at least parts of the security-tracker codebase assume that there won't ever be support for oldoldstable, but once jessie has been released this won't be true anymore. Then we will support stable, oldstable and oldoldstable. And oldstable will be wheezy, not squeeze. We have something like 6 months to fix this, hopefully we won't have much more time... ;-) Oh, and surely there are other places than just the security-tracker which will need to be taught about this.

Daniel Pocock: xTupleCon WebRTC talk schedule change, new free event

As mentioned in my earlier blog, I'm visiting several events in the US and Canada in October and November. The first of these, the talk about WebRTC in CRM at xTupleCon, has moved from the previously advertised timeslot to Wednesday, 15 October at 14:15. WebRTC meeting, Norfolk, VA Later that day, there will be a WebRTC/JavaScript meetup in Norfolk hosted at the offices of xTuple. It is not part of xTupleCon and free to attend. Please register using the Eventbrite page created by xTuple. This will be a hands on event for developers and other IT professionals, especially those in web development, network administration and IP telephony. Please bring laptops and mobile devices with the latest versions of both Firefox and Chrome to experience WebRTC. Free software developers at xTupleCon If you do want to attend xTupleCon itself, please contact xTuple directly through this form for details about the promotional tickets for free software developers.

Holger Levsen: 20140819-lts-august-2014

Debian LTS - feedback about the feedback from my LTS talk at DebConf14 So, I'm more or less back from dc14 and today, five days later, I think I might have mostly overcome jetlag. Probably... So, at DebConf14 I gave a talk about LTS and while I'm sorry that I was that tired, I'm more or less happy how the talk went. Thankfully at least I was calm and relaxed. There are a couple of things I learned from the talk: a.) LTS has been really really perceived well b.) it fits a demand c.) people already take it for granted (eg plan for Wheezy LTS) d.) people expect the same non-intrusive changes as currently done for security updates. To explain the last point: when I explained the - so far - rather theoretical problem that ''squeeze-lts'' has no gatekeeper mechanisms whatsoever (eg no ''proposed-updates'', no NEW queue..) the reaction in the audience was basically "something like this should exist, else how can we deploy this in large scale / on important setup?!". Also currently there is no, well-documented, easily to be found policy for what kind of updates are acceptable. I said that we basically follow the same rules as there are for debian-security updates, but this should really be documented properly. This doesn't seem very hard to fix, just like many things it "just" needs someone to do the work. IOW: we explain how to use LTS, we explain how to contribute to LTS (through uploads or financially) but we lack a simple explaination what LTS is and what kind of updates to expect. It's kinda self evident, but only kinda. So since giving the talk I changed one thing in my personal usage of LTS: I don't use my personal LTS repo anymore, where I made sure only good packages got in. This is for two reasons: a.) I had too add new packages too often and b.) if it really is a problem that LTS has no gatekeeping mechanism (which I'm not sure anymore it is, after all, the updates are prepared by reasonable people with a common goal...) then I want to suffer this first hand, so I can build solutions which benefit everyone, not just me. That personal LTS repo only helped me. On the technical side I prepared five DLAs, for lzo2, libwpd, squid3, lua5.1 and bind9. Not much to see here, they all were very smooth. I still enjoyed the challenge of digging in unknown sourcecode, as described in my previous post. Then more interestingly, and with the help of Raphael Geissert and Salvatore Bonaccorso I fixed the security-tracker to also know about oldstable, after waiting for more than 8 weeks to someone else doing it. I'm very glad that this is done now, as without it was really tedious to check which issues were applying to oldstable. Oh, and another afterthought from giving the talk: currently at least parts of the security-tracker codebase assume that there won't ever be support for oldoldstable, but once jessie has been released this won't be true anymore. Then we will support stable, oldstable and oldoldstable. And oldstable will be wheezy, not squeeze. We have something like 6 months to fix this, hopefully we won't have much more time... ;-) Oh, and surely there are other places than just the security-tracker which will need to be taught about this.

8 September 2014

Ana Beatriz Guerrero Lopez: DebConf14 and ten years contributing to Debian

It has been one week since I m back from DebConf14 and I m still recovering and catching up with things. DebConf14 has been amazing, it has been great to be back after missing it for two years. Thanks a lot to everybody who helped to make it real. On my side, I helped a bit in the talks team. During DebConf14, I got the opportunity to discuss with Rene Mayorga about the MIA work-flow and we also got some feedback in the MIA BoF. We have plenty of ideas to implement and we re aiming to improve things during this next year. This summer has been also 10 years since I started contributing to Debian. It s hard to believe. Ten years ago I barely knew where to start helping and now I have an endless TODO list of things I would like to do. And always during DebConf this list seems to grow ten times faster than usual. Thankfully, also motivation increases a lot :)

Joey Hess: propellor is d-i 2.0

I think I've been writing the second system to replace d-i with in my spare time for a couple months, and never noticed. I'm as suprised as you are, but consider this design: 
main :: IO
main = Installer.main
    & Installer.partition First "/boot" Ext3 (MiB 256)
    & Installer.partition Next "/" Ext4 (GiB 5)
    & Installer.partition Next "/home" Ext4 FreeSpace
    & Installer.grubBoots "hd0"
    & os (System (Debian Stable) "amd64")
    & Apt.stdSourcesList
    & Apt.installed ["task-gnome-desktop"]

main :: IO
main = Installer.main
    & Installer.target CdImage "installer.iso"
    & os (System (Debian Stable) "amd64")
    & Apt.stdSourcesList
    & Apt.installed ["task-xfce-desktop", "ghc", "propellor"]
    & User.autoLogin "root"
    & User.loginStarts "propellor --installer"
Well, now I know where propellor might end up if I felt like spending a month and adding a few thousand lines of code to it.

Jaldhar Vyas: Debconf 14 - Days 1 and 2

Unfortunately I was not able to attend debconf this year but thanks to the awesome video team the all the talks are available for your viewing pleasure. In order to recreate an authentic Portland experience, I took my laptop into the shower along with a vegan donut and had my children stand outside yelling excerpts from salon.com in whiny Canadianesque accents. Here are some notes I took as I watched the talks. Welcome Talk
Debian in the Dark Ages of Free software - Stefan Zacchiroli Weapons of the Geek - Gabriella Coleman bugs.debian.org -- Database Ho! - Don Armstrong Grub Ancient and Modern - Colin and Watson One year of fedmsg in Debian - Nicolas Dandrimont Coming of Age: My Life with Debian - Christine Spang Status report of the Debian Printing Team - Didier Raboud

7 September 2014

Craig Small: How not to get Galaxy Tab into Safe Mode

For weeks my Galaxy Tab 10.1 has reasonably consistently gone into safe mode. Not booting into it but I d use it fine then put it away and next time I looked at it, Safe Mode was there. It wasn t every time, but averaged to be about every second time. So the first thing was a bit of googling to see what this Safe Mode was. Most of the suggestions were around how to put it into safe mode during the boot process but my problem was opposite; it wasn t during booting and I wanted something to stop safe mode, not put the device into it. The closest I got to it was there was some misbehaving program that kicked the thing into safe mode. The problem was, I checked several times and there were no running programs. I really did start to worry I had a hardware fault or something wrong deep within the OS. When you have problems in IT, you re usually asked What s new? What s changed? . The answer is generally Nothing which gets a switch No really, what did change . The only answer I could come up with was a hardware keyboard. This slim aluminum uses bluetooth to communicate to the tablet and clips onto the front screen to protect it when not in use. Could this be the change I was looking for? The clue was that sometimes when you boot Android, if you hold down some keys it boots into safemode. It seems that holding down some combination of keys (volume up/down, power) puts into safe mode. The keyboard can clip onto the tablet in two ways, one long edge has some raised edges while one doesn t. If the raised edge was connected to the same side as the buttons, I d get safe mode sometimes as the edge pushed some of those buttons. More importantly, putting the raised edge on the side with no buttons meant no more safe mode. Not really a software or electrical fault, more one of just mechanics.

6 September 2014

Joachim Breitner: ICFP 2014

Another on-my-the-journey-back blog post; this time from the Frankfurt Airport Train Station my flight was delayed (if I knew that I could have watched the remaining Lightning Talks), and so was my train, but despite 5min of running through the Airport just not enough. And now that the free 30 Minutes of Railway Station Internet are used up, I have nothing else to do but blog... Last week I was attending ICFP 2014 in Gothenburg, followed by the Haskell Symposium and the Haskell Implementors Workshop. The justification to attend was the paper on Safe Coercions (joint work with Richard Eisenberg, Simon Peyton Jones and Stephanie Weirich), although Richard got to hold the talk, and did so quite well. So I got to leisurely attend the talks, while fighting the jet-lag that I brought from Portland. There were as expected quite a few interesting talks. Among them the first keynote, Kathleen Fisher on the need for formal methods in cars and toy-quadcopters and unmanned battle helicopters, which made me conclude that my Isabelle skills might eventually become relevant in practical applications. And did you know that if someone gains access to your car s electronics, they can make the seat belt pull you back hard? Stefanie Weirich s keynote (and the subsequent related talks by Jan Stolarek and Richard Eisenberg) on what a dependently typed Haskell would look like and what we could use it for was mouth-watering. I am a bit worried that Haskell will be become a bit obscure for newcomers and people that simply don t want to think about types too much, on the other hand it seems that Haskell as we know it will always stay there, just as a subset of the language. Similarly interesting were refinement types for Haskell (talks by Niki Vazou and by Eric Seidel), in the form of LiquidTypes, something that I have not paid attention to yet. It seems to be a good way for more high assurance in Haskell code. Finally, the Haskell Implementors Workshop had a truckload of exciting developments in and around Haskell: More on GHCJS, Partial type signatures, interactive type-driven development like we know it from Agda, the new Haskell module system and amazing user-defined error messages the latter unfortunately only in Helium, at least for now. But it s not the case that I only sat and listened. During the Haskell Implementors Workshop I held a talk Contributing to GHC with a live demo of me fixing a (tiny) bug in GHC, with the aim of getting more people to hack on GHC (slides, video). The main message here is that it is not that big of deal. And despite me not actually saying much interesting in the talk, I got good feedback afterwards. So if it now actually motivates someone to contribute to GHC, I m even more happier. And then there is of course the Hallway Track. I discussed the issues with fusing a left fold (unfortunately, without a great solution). In order to tackle this problem more systematically, John Wiegley and I created the beginning of a List Fusion Lab , i.e. a bunch of list benchmark and the possibility to compare various implementations (e.g. with different RULES) and various compilers. With that we can hopefully better assess the effect of a change to the list functions. PS: The next train is now also delayed, so I ll likely miss my tram and arrive home even later... PPS: I really have to update my 10 year old picture on my homepage (or redesign it completely). Quite a few people knew my name, but expected someone with shoulder-long hair... PPPS: Haskell is really becoming mainstream: I just talked to a randomly chosen person (the boy sitting next to me in the train), and he is a Haskell enthusiast, building a structured editor for Haskell together with his brother. And all that as a 12th-grader...

Jonathan McDowell: Breaking up with America

Back in January I changed jobs. This took me longer to decide to do than it should have. My US visa (an L-1B) was tied to the old job, and not transferable, so leaving the old job also meant leaving the US. That was hard to do; I'd had a mostly fun 3 and a half years in the SF Bay Area. The new job had an office in Belfast, and HQ in the Bay Area. I went to work in Belfast, and got sent out to the US to meet coworkers and generally get up to speed. During that visit the company applied for an H-1B visa for me. This would have let me return to the US in October 2014 and start working in the US office; up until that point I'd have continued to work from Belfast. Unfortunately there were 172,500 applications for 85,000 available visas and mine was not selected for processing. I'm disappointed by this. I've enjoyed my time in the US. I had a green card application in process, but after nearly 2 years it still hadn't completed the initial hurdle of the labor certification stage (a combination of a number of factors, human, organizational and governmental). However the effort of returning to live here seems too great for the benefits gained. I can work for a US company with a non-US office and return on an L-1B after a year. And once again have to leave should I grow out of the job, or the job change in some way that doesn't suit me, or the company hit problems and have to lay me off. Or I can try again for an H-1B next year, aiming for an October 2015 return, and hope that this time my application gets selected for processing. Neither really appeals. Both involve putting things on hold in the hope longer terms pans out as I hope. And to be honest I'm bored of that. I've loved living in America, but I ended up spending at least 6 months longer in the job I left in January than I'd have done if I'd been freely able to change employer without having to change continent. So it seems the time has come to accept that America and I must part ways, sad as that is. Which is why I'm currently sitting in SFO waiting for a flight back to Belfast and for the first time in 5 years not having any idea when I might be back in the US.

Thomas Goirand: Debconf 14 activity

Before I start a short listing of (some of) the stuff I did during Debconf 14, I d like to say how much I enjoyed everyone there. You guys (all of you, really!) are just awesome, and it s always a real pleasure to see you all, each time. Anyway, here s a bits of the stuff I did. 1/ packaging of Google Cloud Engine client tools. Thanks to the presence of Eric and Jimmy, I was able to finish the work I started at Debconf 13 last year. All python modules are packaged and uploaded. Only the final client (the gcloud command line utility) isn t uploaded, even though it s already packaged. The reason is that this client downloads stuff from internet, so I need to get the full, bundled, version of it, to avoid this. Eric gave me the link, I just didn t have time to finish it yet. Though the (unfinished) package is already in the Git in Alioth. 2/ Tasksel talks We discussed improvements in Tasksel both during the conference, and later (in front of beers ). I was able to add a custom task on a modified version of the Tasksel package for my own use. I volunteered myself for adding a more task option in Tasksel for Jessie+1 because I really would like to see this feature, and nobody raised hand, but honestly, I have no idea how to do it, and therefore, I m not sure I ll be able to do so. We ll see Anyway, before this happen, we must make sure that we know what kind of tasks we want in this more tasks screen, otherwise it d be useless work for nothing. Therefore, I have setup a wiki page. Please edit the page and drop your ideas there. I ve already added entries for desktops and Debian blends, but I m sure there s more that we could add. 3/ Custom Debian CD I started experimentation on building my own Debian Wheezy CD image (well, DVD, since the resulting image is nearly 2GB). This was fun, but I am still having the issue that the installer fails to install Dash, so the CD is still unusable. I ll try to debug it. Oh I nearly forgot of course , the ISO image aims at including all OpenStack Icehouce packages backported to Wheezy, and the goal was to include the above custom Tasksel task, with an OpenStack proxy node task, and a OpenStack compute task. Let s hope I can figure out what the issue is, and finally release it. 4/ OpenStack talk Nothing special to say, just watch the video. I hope my talk was interesting enough. Of course, after watching myself, I hate everything I see, and would like to correct so many mistakes, but that s the usual, I guess. 5/ Some RC fixing Thanks to the nice work of our DPL rebuilding all the archive, I had to fix a couple of FTBFS issues on my own packages. 3 of them have been easy to fix (2 missing build-dependencies which I missed because my automated build environment has them by default, and a unit test failure), I still don t understand what s going on with Ceilometer. I also NMU-ed transmission (switching from 2.82 to 2.84, as upstream had the bugfix, and current maintainer was not responsive) which was the last blocker for the miniupnpc transition to Jessie. After the 5 days delay of the upload, it went in Sid, then migrated to Jessie, together with the miniupnpc library. I also fixed a trivial RC bug with python3-webob. 6/ Python team meeting It was nice to see everyone, and hopefully, we ll soon implement what we discussed. I hope to start migrating some of my OpenStack dependencies to the team once we move to Git (though please don t expect this to happen before the Juno release, which keeps me very busy these days). There s probably more stuff which I did during Debconf 14 (hacking or otherwise), but either it s not worth sharing, or I can t remember :)

Russ Allbery: Accumulated hauls

I haven't made one of these in a long time, so I have some catching from random purchases to do, which includes a (repurposed) nice parting gift from my previous employer and a trip to Powell's since I was in the area for DebConf14. This also includes the contents of the Hugo voter's packet, which contained a wide variety of random stuff even if some of the novels were represented only by excerpts. John Joseph Adams (ed.) The Mad Scientist's Guide to World Domination (sff anthology)
Roger McBride Allen The Ring of Charon (sff)
Roger McBride Allen The Shattered Sphere (sff)
Iain M. Banks The Hydrogen Sonata (sff)
Julian Barnes The Sense of an Ending (mainstream)
M. David Blake (ed.) 2014 Campbellian Anthology (sff anthology)
Algis Budrys Benchmarks Continued (non-fiction)
Algis Budrys Benchmarks Revisited (non-fiction)
Algis Budrys Benchmarks Concluded (non-fiction)
Edgar Rice Burroughs Carson of Venus (sff)
Wesley Chu The Lives of Tao (sff)
Ernest Cline Ready Player One (sff)
Larry Correia Hard Magic (sff)
Larry Correia Spellbound (sff)
Larry Correia Warbound (sff)
Sigrid Ellis & Michael Damien Thomas (ed.) Queer Chicks Dig Time Lords (non-fiction)
Neil Gaiman The Ocean at the End of the Lane (sff)
Max Gladstone Three Parts Dead (sff)
Max Gladstone Two Serpents Rise (sff)
S.L. Huang Zero Sum Game (sff)
Robert Jordan & Brandon Sanderson The Wheel of Time (sff)
Drew Karpyshyn Mass Effect: Revelation (sff)
Justin Landon & Jared Shurin (ed.) Speculative Fiction 2012 (non-fiction)
John J. Lumpkin Through Struggle, the Stars (sff)
L. David Marquet Turn the Ship Around! (non-fiction)
George R.R. Martin & Raya Golden Meathouse Man (graphic novel)
Ramez Naam Nexus (sff)
Eiichiro Oda One Piece Volume 1 (manga)
Eiichiro Oda One Piece Volume 2 (manga)
Eiichiro Oda One Piece Volume 3 (manga)
Eiichiro Oda One Piece Volume 4 (manga)
Alexei Panshin New Celebrations (sff)
K.J. Parker Devices and Desires (sff)
K.J. Parker Evil for Evil (sff)
Sofia Samatar A Stranger in Olondria (sff)
John Scalzi The Human Division (sff)
Jonathan Straham (ed.) Fearsome Journeys (sff anthology)
Vernor Vinge The Children of the Sky (sff)
Brian Wood & Becky Cloonan Demo (graphic novel)
Charles Yu How to Live Safely in a Science Fictional Universe (sff) A whole bunch of this is from the Hugo voter's packet, and since the Hugos are over, much of that probably won't get prioritized. (I was very happy with the results of the voting, though.) Other than that, it's a very random collection of stuff, including a few things that I picked up based on James Nicoll's reviews. Now that I have a daily train commute, I should pick up the pace of reading, and as long as I can find enough time in my schedule to also write reviews, hopefully there will be more content in this blog shortly.

5 September 2014

Craig Small: WordPress 4.0 for Debian

Yesterday WordPress released version 4.0 or Benny of WordPress. I have now downloaded it and packed up for Debian users. The files just hit the ftp-master a few minutes ago and will then be distributed out to the various Debian mirrors. The upgrade should go smoothly but you will probably need to upgrade the twentytwelve/twentyfourteen themes if you have them installed. It seems release 4.0 they also updated these themes. My next Debian task for wordpress is to re-examine the permissions and locations of wp-content to see if we can have something that permits online updates of the plugins and themes but is still FHS compliant. I ve also had some people report they have some installation problems, mainly around configuration and directories so let s see if that can get fixed too.
Related articles

Wouter Verhelst: ASCII art Wouter

                          _____o****o__                               
                        dQ@@@@@WQ@Q&WWbo*,                            
                     __o@@@@@@@@@@@@@@@@&*b_,                         
                    .dQ@@@@@@@@@@@@@@@@@@@@&*bo__                     
                   .*@@@@@@@@@@@@@@@@@@@@@@@@&Q@bo                    
                   d@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@b                   
                  <]@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#b                  
                 _d#@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&**,                
              _,.dd@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*b,               
              d"Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@b*b_              
             <*Q@@@@@V?$@@@@@@@@V$F$@@@@@@@@@@@@@@@@@[**_,            
            .*Q@@@@?*"***VV$V?"******"V@@@@@@@@FV@@@@@&W**>           
            <#@@@@" ---<"*****?' ''?''**"VVV@"****$@@@@@&b,           
           .d@@@@" '-------'' --------''"****?'--'"$@@@@@*>           
           ]#@@#" '----------------------'?'-------"@@@@@*">          
          <*@@@*   ,--------------------------------"@@@@&*,          
          d#@@V>   '--------------------------------'"@@@?"*,         
         <d@@$"    .--------'------------------------<$@@&b*b,        
         <@@@"      ---------  -----------------------"@@@[**>        
         d@@@"      '-----      -      '--------------'#@@@***        
        <@@@"        '- -               --- -----------*@@@***>       
        <]@""                             -,-----------<$@@[**>       
         ][F[          '                  '-------------]@@[**>       
        <Q@[                                - ----------*@@&**>       
        <#"">                                   --------*@@@**>       
        <@"*                                    ---- ---*@@@&*>       
        ]Q#[                                      ------]#@@&*        
        ]@#[                                          <-<#@@@*>       
        ]@#b                                          .-<]@@@*        
        "@@[                                         ---<#@@@*        
        <@@"                                         ----]@@@*        
        ]#@[                                           -.]@@&"        
        ]#@b                                           -<]@@@[        
        <@@[                                       <   -<]@@"[        
        <@@[                                           -<]@@V>        
        <@@>     ,                                 ..  -<]@@b,        
        d@#>   -._----___ _                 _ _-_   -- -<#@@#-        
        ]@*> _-d*****obo_----       __--------___-, ----]@@@*,        
        d@[> -**?"**@@@@@o*>--,  -,---.o*ooW******_,,.--]@@#"         
        #@[> -???'''--''?"**----<----<*@@@@@V******[----]@@@b>        
        *@[  -------------------<----*"'----''----'--->-<@@@*>        
        *@[  ------ooWWo,------- ------------_ '--------<@@@*-        
        "]>  <---bd?"@@@" .----,  -------dQ@@&b-.-----'''$@[*         
        *">   '--*",'$@#> -,'---  --- --''$@@@?&_---->  -]@[*-        
        "*     --'--.'"   --.---  --- --, ]@@"-?*----   -"@* >        
        <*>      <------    ----  ---  ''--'",------    -]"*->        
        <*,       -----,   -----'----,  ---------       -]#*-         
        '">        ---     -----  <---                  '][[          
         <                 -----------,                 <d"[          
         <>               .------------                 -**-          
          >               <-----  -----                <- --          
          -               .-----  -----                .--'           
          -               ------,.-----                -'-            
          ->              -------------                -.-            
          --              ---  -  -----                --             
          --              ---      -----              --->            
          --             .->       -----              ---             
          -->            -----    .-----              ---             
          <-> '         ---- _-----__---            ' ---             
           --_.        ------'-----'----           ...---             
           ---        ---------''------.           <----              
           ---,     -------- ------- --,-          -----              
           <-----  --------_--------,-----        .-----              
            --------------*?-------- --------,    -----               
            -----'------_? -- '------'b--------- .-----               
            ----- ---""" ---.   '  ---'bb-------.------               
            ----------d,-------___-----'*o"----  -----               
            '--------'' -.,-------------<*[- ----.----                
             -----------'------'--------'"*----> -----                
             -----------, '---   ---------------------                
             -------------,_---->---- '_-------------                 
             ',---------------.__.,.-----------------                 
              '-------------''?*"?''----------------                  
              '>------------------------------------                  
              'b -----------------------------------                  
              <<,---------------------------------,-                  
               '*,-------------- --------------.--                    
               -"*_----------------------------'d>-                   
           .o, --**>.o----------------------,-.** -                   
         .@@@[ .-"*****_-_----------------o******--                   
         Q@@F   -'******d*--------------,-****** --                   
        .@@F    '-<*******-.-.,------.o*********---,_o@W,             
        ]@[--    --"***d***od*--****dbd********"----@@@@[             
      .d@@#,-    --'***"@o*************oWb****"-----'$@@&,            
    _oQ&@@@>    ----'"**]@@o********doQ@?****"--------"@@b            
 dQ@@@@@@@@b      '---**"$@@@@@@@@@@@@F"*****---------<]@@d,,         
@@@@@@@@@@@[,      ---'***V?""??VVV"********>---------<Q@@@@@&b,      
@@@@@@@@@@@@><      ---'*******************?----------d@@@@@@@@@F_    
@@@@@@@@@@@@[.      <----"****************"----------]Q@@@@@@@@@@@@bo_
@@@@@@@@@@@@@>-      -----'**************'----------.#@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@[>        ------********** ------------d@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@[        '-------"****? -------------.Q@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@&,         ------'''''---------------d@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@o,         ------------------------.Q@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@[_         '----------------------d@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@[,          --------------------]@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@b-_          '----------------.Q@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@b-            '--------------Q@@@@@@@@@@@@@@@@@@@@@
You know you're doing a fun gig when you get to do things like the above on billable hours. Full story: writing a test suite for reading data from eID cards. It makes sense to decode the JPEG data which you read from the card, so that you know there's no error in the lower-layer subroutines (which would result in corruption). And since we've decoded it anyway, why not show it in the test suite log? Right.

4 September 2014

Junichi Uekawa: Bluetooth network error.

Bluetooth network error. I think it's a network-manager feature to be able to use bluetooth tethering. I think it's a network-manager bug that when bluetooth tethering fails due to some error, and does not report that error. Yesterday I finally figured out what was going wrong after staring at hcidump. It was obvious after I did. I've reset my tablet so bluetooth PIN was wrong. If only the GUI told me that.

Junichi Uekawa: I wanted to file a bug but Debian BTS doesn't seem toreceive my SMTP mail for some reason.

I wanted to file a bug but Debian BTS doesn't seem to receive my SMTP mail for some reason. Somewhere between the MTA and the server something is wrong.

Next.

Previous.