
Ever since I built an
AirGradient board back in 2023, I
have been more and more conscientious about air quality. Pretty instantly after
installing the board in my living room, I realised common habits like cooking
can significantly increase the particulate levels in my entire apartment.
Here is a good example of a pretty large (and long-lasting) PM
2.5
spike on September 23
rd after cooking a meal
:

Isn't this crazy? Last time Montreal had such bad outdoor air quality, there
were public broadcasts telling people not to go outside and to wear N95 face
masks if we absolutely needed to. Inside my apartment though, no one ever told
me cooking veggies in a little oil on medium-low
could make the air I
breathe unsafe.
This of course is aggravated by the fact my apartment is pretty much as airtight
as it can reasonably be, since winters here are very cold and air infiltrations
are a major heat loss source. As such "opening my windows when I cook" is not a
viable solution to this problem half of the year.
I first tried solving this issue by tuning my HVAC system. Sadly, its controls
don't offer much flexibility
, which means it is not the right tool to
respond to short-lived spikes like these. Not only this, but the quality of the
air outside is not always good either: Canada now has a forest fire season
(we're all doomed) and my neighbors regularly smoke cigarettes right under my
HVAC air intake
.
A box, but nicer-looking
Clearly, the solution to this particular issue was to buy an air purifier. Or
at least, that's what a "normal" people would have done. Sadly, these units are
expensive, use (expensive) proprietary filters,
don't work very
well and can be loud.
One of the great inventions of the COVID-19 pandemic is the
Corsi-Rosenthal
box. Popularised in 2020 by Richard Corsi and Jim Rosenthal, the idea
is to make a DIY air purifier by using a large fan to force air through cheap
and readily available MERV13 air filters.
The main downsides of regular CR boxes is they are pretty ugly, can be loud
depending on the fan used and need to be rebuilt when the filters are changed
(
they are held using tape).
That's when I stumbled on
this amazing design for a silent and
sleek CR box sold by
The 3D Handyman. Clearly, with a bit of
tinkering and a 3D printer, I could also design something sleek, silent and
efficient!
Since I was already using MERV13 air filters in my HVAC, I decided to design
around 4 vertical "beams" where the filters would slot in. With tight enough
tolerances, I figured I could get rid of the complex moving parts in The 3D
Handyman's design. I also added M5 threads to screw the top and bottom panels
and the TPU feet to elevate the box from the floor.

The final result looks like this. I used some foamcore boards I had laying
around at work for the top and bottom panels, but any somewhat rigid plastic
panels (like coroplast) would also work:

out' position" alt="The whole CR box assembled, with the fan in the 'in -> out' position">

I ended up having to split the "beams" in two and joining them with dowels, as
even the largest 3D printers I had access to couldn't print them in one piece.
Costs
Here's the cost breakdown for this project (shipping and taxes are included):
Total: 502.19 CAD
Yikes, expensive! But:
-
The fan is amazing. It is by far the best fan I have ever owned. Not
only it is all metal and very quiet, but it is also PWM-controlled via a
USB-C controller, which means the speed it runs at can be automated.
I have been using it constantly and take it out of the CR box during the summer
to be used as a "regular" fan. I like it so much so I am seriously
considering buying the 14 inch model.
-
The 3D printed parts are plastic and they will last me a lifetime.
-
As mentioned before, the filters are the same I use in HVAC, which means I can
buy them in packs of 12 to reduce costs.
All in all, I'm very happy with this project. Since finishing it, I have been
able to consistently get the PM
2.5 levels in my apartment down to
zero and significantly reduce the time it takes to recover from a spike caused
by cooking food.
I certainly could have cut the cost of this project in half by choosing a
cheaper fan, like the box fans used in the reference Corsi-Rosenthal
instructions, but I decided to spend more for a more quiet and reliable option.
3D files
Here are the STLs I used for this project. I certainly don't recommend just
printing them as-is, since I am using the 12" x 12 " x "
custom air
filters from my HVAC and you should probably use something more standard.
If you use these files as inspiration, your goal should be to make a box that
is 16" wide, to fit the AC Infinity fan comfortably. I printed the "beams" in
PETG at 100% infill and the feet in TPU 95:
Future
The next step in this project is to automate the fan speed based on the
PM
2.5 levels in my apartment. At the moment, I manage this manually
and it is becoming a chore.
This should be relatively easy to do with a Raspberry Pi Pico board, since AC
Infinity sells a
USB-C to Molex adapter for the fan.